Moroso Products Alphabetical Index
| Moroso Performance Products - Catalog |
| VACUUM PUMPS & ACCESSORIES, MOUNTING BRACKETS, OIL PUMP & VACUUM PUMP DRIVE KIT & PULLEYS Blower Motor Pumps |
| Vacuum Relief Valves, Vacuum pump Regulator, Fittings, Breather, Gauges, Vacuum Line Cap Kit, Equalizing Plates, Vacuum Pump Belts, Alternator Mount Kits, Vacuum Pump Mounting kits, Power Steering Pump Mounts, Oil Pump & Vacuum Pump Drive Kits, Dry Sump Pump Drive Kits, Oil Pump &Vacuum Pump Drive Mandrels, Belt Guides, Crank Pulley Shim Kit, Pulleys Accessories, Gilmet Drive Pulleys, Dry Sump Pump Pulleys |
RPM - RON'S PRECISION MACHINE, INC.
69 E. 580 N.
Santaquin, Utah 84655
https://www.rpmrons.com
1-801-754-5338 or Toll free 1-866-700-5877
Contact us anytime
24-7
Hours 9-5 Monday-Friday Mtn. Time
| Engine Rebuild Kit and Parts Online Catalog. |
|
Hours: 9:00 AM to 5:00 PM Monday - Friday mountain time (Utah) Call toll free to purchase parts at: 1-866-700-5877 U.S. only |
Moroso Products Alphabetical Index
| . | Page(s) |
| RACE SUPPORT & CONTINGENCY | 1 |
| PRODUCT INDEX for this page | 2-7 |
| NEW PRODUCTS FOR 2017 | 8-29 |
| OIL PANS & ACCESSORIES Small Block Chevrolet | 30-45 |
| OIL PANS & ACCESSORIES LS series |
|
| OIL PANS & ACCESSORIES LT series |
|
| OIL PANS & ACCESSORIES Big Block Chevy | 55-66 |
| OIL PANS & ACCESSORIES Chryler, Ford | 67-92 |
| OIL PANS & ACCESSORIES Oldsmoble | 93-101 |
| Oil Pan Accessories | 104-111 |
| OIL PUMPS | 112-133 |
| OILING SYSTEM | |
| VACUUM PUMPS & ACCESSORIES | |
| MOUNTING BRACKETS | |
| OIL PUMP & VACUUM PUMP DRIVE KIT & PULLEYS | |
| AIR/OIL SEPARATORS | |
| TANKS & COVERSALS | |
| TRANSMISSION PANS & ACCESSORIES | |
| CHEMICALS | |
| FASTENERS | |
| BRAKE & WHEEL EQUIPMENT | |
| TRICK SPRINGS | |
| TOOLS | |
| MOTOR & TRANSMISSION MOUNTS | |
| COOLING SYSTEM | |
| FUEL SYSTEM EQUIPMENT | |
| AIR CLEANERS & ACCESSORIES | |
| EXHAUST SYSTEM | |
| VALVETRAIN EQUIPMENT | |
| VALVE COVERS & Accessories | |
| IGNITION WIRE |
310-332 |
| IGNITION SYSTEM |
333-347 |
| ELECTRICAL SYSTEM |
348-359 |
| REAR AXLE EQUIPMENT |
360-361 |
| SHEETMETAL & BODY |
362-363 |
| STEERING |
364 |
| TIRES |
365-366 |
| APPAREL |
367-368 |
|
B (con’t) Brackets, Mounting............... 22, 28-29, 164-168 Brackets, Vacuum Pump....................... 163-166 |
|
|
|
G Gilmer Drive Belts............................. 178 |
|
L Line Kit, Vacuum Pump.................. 157 |
|
W Water Pump Bracket Kit................... 164-166 Water Pump Pulley Shims......................... 172 Wet Sump vs. Dry Sump Oiling Information .....................................31 |
|
The nature of a vacuum pump is to remove air, blow-by gasses
and other contaminants from the crankcase of an engine. Crankcase
vacuum will increase horsepower by allowing the use of low-tension
compression and oil control rings. In which the use of reduces
frictional horsepower losses, blow-by, intake charge contamination
and aids in detonation prevention. Moroso’s "purpose
built" racing pumps offer all these advantages and more. Whether you have a normally aspirated Small Block or a nitrous equipped Pro-Mod, one of Moroso’s vacuum pump offerings with all the needed accessories has you covered. These pumps will suit nearly any engine combination and requirement. |
|
.• Versatile Billet aluminum design • Engineered vane material for improved efficiency and wear • Completely rebuildable in 15 minutes • Mounting bracket not included • 4.150" O.D. body, 5.050" from back of pump to pulley mounting flange |
| PART # | DESCRIPTION |
| 22640 $832.80 | Original Design 3-Vane Vacuum Pump, -12AN Fittings |
|
.We’ve taken our popular 3-Vane Vacuum Pump and added tricks
that we learned when designing our "Enhanced Design"
4 Vane Vacuum Pump and through continual development of our Vacuum
Pump line. The end result is: |
|
.• The "Enhanced Design" features allow the pump
to pull more vacuum than the "Original" style 3-Vane
pump • Achieves greater vacuum sooner • 3-Vane Design weighs less than "original" style pumps • Virtually maintenance free • Designed with maintenance-free precision sealed roller bearings • Includes -12AN Fittings • Mounting bracket not included • 4.375" O.D. body, 5.050" from back of pump to pulley mounting flange |
| PART # | DESCRIPTION |
| 22840 $816.59 | Enhanced Design 3-Vane Vacuum Pump, -12AN Fittings, Hard Anodized Finish |
| PART # | AVAILABLE OPTIONS |
| 63903 | Vacuum Pump Idler Pulley Kit |
|
.• Versatile Billet aluminum design, well suited for wet
or dry sump applications • Engineered vane material for improved efficiency and wear • Completely rebuildable in 15 minutes • Mounting bracket not included • 4.150" O.D. body, 5.900" from back of pump to pulley mounting flange |
| PART # | DESCRIPTION |
| 22641 $966.45 | Original Design 4-Vane Vacuum Pump, -12AN Fittings |
| PART # | REPLACEMENT PARTS |
| 97641 $43.15 | Replacement Fittings, -12AN |
| 22626 $76.75 | Replacement Fittings, -16AN |
| 22645 $188.89 | Vacuum Pump Rebuild Kit, Includes Bearing, Seals & Vanes For No. 22640 $832.80 |
| 22646 $234.85 | Vacuum Pump Rebuild Kit, Includes Bearing, Seals & Vanes For No. 22641 $966.45 |
| 97180 $91.71 | Rebuild Kit, Excluding Vanes, Includes Shaft & Hub, For Nos. 22640, 22641 $966.45 |
| 97181 $91.71 | Rebuild Kit, Excluding Vanes, Includes Shaft & Hub, For Nos.22642, 22644, 22840, 22842 $938.10 |
| 97642 $236.18 | Vacuum Pump, Vane Kit, For Nos. 22640, 22641, 22642, 22644, 22840, 22842 $938.10 |
| 97644 $269.95 | Vacuum Pump, Vane Kit, For No. 22643 $1,503.70 |
|
.• "Enhanced Design" pulls 13.9% more vacuum • Can be used efficiently on wet or dry-sump engines • Achieves greater vacuum sooner, virtually maintenance free • 4-Vane design weighs less than "original" style pumps • Designed with maintenance-free precision sealed roller bearings • Pump No. 22644 $1,082.55 is natural aluminum finish designed to be polished, interior hard coated for wear resistance • 4.375" O.D. body, 5.050" from back of pump to pulley mounting flange |
| PART # | DESCRIPTION |
| 22842 $938.10 | Enhanced Design 4-Vane Vacuum Pump, -12AN Fitting, Mounting Bracket not included, Hard Anodized Finish |
| 22642 $1,079.88 | Enhanced Design 4-Vane Vacuum Pump Kit, -12AN Fitting, Mounting Bracket, Hard Anodized Finish |
| 22644 $1,082.55 | Enhanced Design 4-Vane Vacuum Pump Kit, -12AN Fitting, Mounting Bracket, Natural Aluminum Finish |
| PART # | AVAILABLE OPTIONS |
| 63903 | Vacuum Pump Idler Pulley Kit |
|
.This "large style" 4-Vane Vacuum Pump was released
from feedback by racers and engine builders who craved the performance
of the Moroso "Pro-Mod Style" vacuum pump but needed
a pump that was physically smaller and lighter. . Pulls large consistent vacuum numbers . Creates vacuum quickly and linearly . Virtually maintenance free, designed with maintenance-free precision sealed roller bearings . Includes a manifold for dual feed applications or installation of a relief valve . Comes with a 36 tooth 3/8" pitch 1/2" wide Gilmer pulley, adjustable mounting bracket and -12AN fittings . 5.030" O.D. body, 6.175" from back of mounting bracket to end of slot on front of pulley |
| PART # | DESCRIPTION |
| 22843 $1,664.35 | Large Style 4-Vane Vacuum Pump |
| PART # | AVAILABLE OPTIONS |
| 22630 $84.85 | Vacuum Relief Valve, -12 AN Adjustable |
| 97172 $78.15 | Crankshaft Drive Pulley, 18 tooth, 1/2" wide, Gilmer |
|
.. Large displacement creates incredible vacuum . Flows up to 150% more than Original Design . Capable of flowing 100 CFM with -16AN fitting . Utilizes sealed maintenance free bearings . Adjustable bracket and fittings included . 5.300" O.D. body, 6.550" from back of pump to pulley mounting flange |
| PART # | DESCRIPTION |
| 22643 $1,503.70 | Pro Mod Style Large Cubic Inch & Blower Motor Pump, 1-1/4" beaded hose fitting with -16AN Inlet and Outlet Fitting |
|
.PROPERLY MAINTAIN YOUR MOROSO VACUUM PUMP Moroso recommends that your Vacuum Pump be cleaned on a regular basis for optimum performance. When performing any maintenance, wear approved safety glasses. Loosen the vacuum pump pulley bolts and remove the pulley. Remove the vacuum pump from engine and remove bearing cap from the back of the pump. |
| .Next, place the rotor, shaft and front cover assembly into the housing. Replace the vanes making sure the vane notches are facing the shaft and the curved "worn-in" surfaces are facing the housing. If you are using new vanes, they will not have a curved end, follow the instructions provided with the Rebuild Kit. Replace rear cover and bearing cap. Install and tighten the front and rear cover hardware and bearing cap screw. Re-install pump onto your engine. |
|
.Q: HOW FAST SHOULD I DRIVE THE VACUUM PUMP FOR BEST RESULTS?
A: As a base line, all Moroso Vacuum Pumps will work at 50% of engine speed. Our Drive Kits are designed to work with the pump pulleys to achieve the proper ratio. Q: WHAT IF I NEED MORE VACUUM? A: In applications that require more vacuum at a lower engine RPM (i.e. at idle or at staging RPM) or through the entire RPM range it may be necessary to increase the drive ratio of the pump. Consult your Moroso Technical Advisor for assistance in choosing the proper drive ratio. |
|
.Q: HOW FAST CAN I DRIVE MY VACUUM PUMP? A: Moroso Vacuum Pumps
Part Nos. 22640 $832.80 and 22641 $966.45 can turn no more than
6500 RPM shaft speed. Moroso Vacuum Pump Nos. 22642 $1,079.88
and 22643 $1,503.70 can turn 8000 RPM maximum shaft speed. Q: WHAT IS THE BEST WAY TO CARE FOR MY NEW MOROSO VACUUM PUMP? A: Keep it clean. Q: HOW OFTEN SHOULD I REBUILD MY VACUUM PUMP? A: As a "rule of thumb", it is generally good practice to rebuild your vacuum pump after 300 runs. Upon physical inspection it is recommended to rebuild your pump when the vanes are sitting below the rotor surface .100" or greater. Other key indicators for rebuild are excessive bearing or shaft wear. Rebuild kits are available from Moroso. Moroso Vacuum Pumps, like any part on a race car, require some up keep to ensure good performance. Q: HOW MUCH VACUUM IS ENOUGH? A: Leading engine builders and race teams confirm that on wet sump systems, 10" to 14" of vacuum will create additional horsepower and minimize oiling system related problems. Dry sump engines should be kept in the range of 18" to 22" Hg. Although normally capable of achieving greater vacuum levels, it is best to consult a professional engine builder if higher levels of vacuum are desired. Moroso carries a variety of vacuum relief valves to adjust the maximum amount of vacuum an engine will make. Q: WHY DOES MY ALCOHOL ENGINE MAKE LESS VACUUM? A: Engines running alcohol typically see less vacuum than an engine that runs on gasoline. This is from the ring sealing characteristics between the two fuels. Q: WHEN IS THE BEST TIME TO CHECK MY VACUUM AND OIL PRESSURE? A: The best time to check vacuum and oil pressure together is during your trans brake check. At your staging RPM, monitor what your vacuum and oil pressure is. This is the most consistent way of knowing what condition your system is in. Q: WHERE SHOULD THE INLET OF MY MOROSO VACUUM PUMP BE PLUMBED? A: Moroso Vacuum Pumps are most commonly plumbed to the front or top of a valve cover. Using Moroso Part Nos. 22634 $97.01 or 22635 $74.18 Positive Seal Fitting with a built-in baffle, no welding is required on the valve cover. This fitting allows a small amount of oil to flow through the pump for increased lubrication. Be sure to consult the Moroso catalog for a listing of all the accessories needed for your application. |
|
.• Vacuum relief point is adjustable by turning the built-In
adjustment knob to get the precise amount of vacuum desired.
Tightening the integral locknut keeps the adjustment locked until
the next adjustment is needed • Can be disassembled for easy cleaning and maintenance and will work with any vacuum level • They are made of 6061 aluminum and have a smooth, attractive finish |
| PART # | DESCRIPTION |
| 22630 $84.85 | Vacuum Relief Valve with Easy Adjustable Knob, Gland Seal (-12AN Female) |
| 22631 $84.85 | Vacuum Relief Valve with Easy Adjustable Knob, Face Seal ("Face to Face" thru sheetmetal) |
|
.. Two styles allow fastening through valve covers (No. 22637)
or threaded directly into lifter valley (No. 22636) . Vacuum relief point is adjustable by shimming an internal spring to get the precise amount of vacuum desired . Can be disassembled for easy cleaning and maintenance and works with any vacuum level . They are made of 6061 T6 Billet aluminum and have a clear, attractive finish |
| PART # | DESCRIPTION |
| 22636 $119.99 | Billet Aluminum Vacuum Relief Valve, Shim-able Spring Style, 3/8" NPT |
| 22637 $119.99 | Billet Aluminum Vacuum Relief Valve, Shim-able Spring Style, 3/4"-16 Thread |
| PART # | DESCRIPTION |
| 22633 $218.63 | Vacuum Pump Regulator, Shim-able Spring Style |
|
.• Regulator screws directly into vacuum pump’s -12AN
inlet no need to drill additional holes in the valve cover • 360º directional adjustability by turning the built-in adjustment knob to get the precise amount of vacuum desired • Tightening the integral locknut keeps the adjustment locked until the next adjustment is needed • Can be disassembled for easy cleaning and maintenance and will work with any vacuum level • Made from 6061 billet aluminum with a clear anodized finish • Prevents pulling excess oil out of the crankcase |
| PART # | DESCRIPTION |
| 22629 $214.54 | Vacuum Pump Regulator with Easy Adjustable Knob |
| PART # | DESCRIPTION |
| 22634 $97.01 | -16AN Fitting, Positive Sealing, one per package |
| 22635 $74.18 | -12AN Fitting, Positive Sealing, one per package |
| PART # | REPLACEMENT PARTS |
| 97641 $43.15 | -12AN Replacement Fitting, two per package |
| 22626 $76.75 | -16AN Replacement Fitting, two per package |
| PART # | DESCRIPTION |
| 22626 $76.75 | Fitting, Vacuum Pump, -16AN |
|
.. Designed to facilitate connection of vacuum gauge to the valve
cover without welding . Use with Moroso Vacuum Gauge No. 89610 $43.04 . Includes O-rings |
| PART # | DESCRIPTION |
| 22632 $28.28 | Positive Seal 1/8" NPT Fitting |
|
.. Non-weld kit, makes it easy to add a leak-proof fitting to
oil pans for oil returns, valve covers, etc., without having
to actually weld the fitting . Perfect for adding a fitting to steel or aluminum with up to a 1/8" max. wall thickness . O-ring seal to prevent leaks |
| PART # | DESCRIPTION |
| 22753 $35.02 | -10AN Male Fitting, Non-Weld |
|
.• Clamps onto a 1" outside dia. tube, clamp included • Fits Moroso Billet Alum. Vacuum Relief Valves Nos. 22633, 22636, and 22637. • Provides maximum protection against dirt and airborne debris without restricting air flow • Cleanable and re-usable: oil before use |
| PART # | DESCRIPTION |
| 68791 $35.05 | Clamp On Breather, 1" I.D. |
|
.. No. 89610 $43.04 is used to determine vacuum in your engine . No 89611 $43.04 is for racing applications where high pressures, above the range of typical oil pressure gauges are used . Have 1/8" NPT male thread . Excellent vibration and shock resistance |
| PART # | DESCRIPTION |
| 89610 $43.04 | Vacuum Gauge, 1.5" Diameter, 0-30" Hg |
| 89611 $43.04 | Oil Pressure Gauge, 1.5" Diameter, |
|
.• Includes 6 feet of steel reinforced hose, two 90°
hose fittings and two –12AN straight hose fittings • Designed to simplify Vacuum Pump installation |
| PART # | DESCRIPTION |
| 22649 $187.45 | Vacuum Pump Line Kit |
| PART # | REPLACEMENT PART |
| 22651 $66.06 | Vacuum Pump Replacement Line |
|
.. Convenient kit provides a quick, sure way to seal vacuum line
connections at carburetors, manifolds, etc. when vacuum lines
have been removed . Kit consists of color-coded soft plastic caps in quantities and inside dimensions as follows: two 1/8", six 3/16", six 1/4", two 5/16", four 3/8" |
| PART # | DESCRIPTION |
| 41090 $7.18 | Vacuum Line Cap Kit |
|
.• Convenient kit provides a quick, sure way to seal vacuum
line connections atcarburetors, manifolds, etc. when vacuum lines
have been removed • Kit consists of black soft plastic caps in quantities and inside dimensions asfollows: two 1/8", six 3/16", six ¼", two 5/16", four 3/8" |
| PART # | DESCRIPTION |
| 41091 $9.84 | Vacuum Line Cap Kit, Black |
| PART # | DESCRIPTION |
| 65397 $61.95 | Fuel Pump Block-Off Plate, SBC |
| 65398 $61.95 | Fuel Pump Block-Off Plate, BBC, 273-440 Chrysler, and all Fords except 351C, 351M and 400 |
| CHEVROLET GM LS SERIES | . | CHEVROLET SMALL BLOCK | ||
| 3-Vane Vacuum Pump | 3-Vane Vacuum Pump | |||
| PART # | DESCRIPTION | PART # | DESCRIPTION | |
| 22640 $832.80 | 3-Vane Vacuum Pump | 22640 $832.80 | 3-Vane Vacuum Pump | |
| 63860 $356.35 | Vacuum Pump Drive Kit | 63910 $94.39 | Vacuum Pump Mounting Bracket | |
| 63922 $111.85 | Vacuum Pump Bracket | 64885 $97.05 | Vacuum Pump V-Belt Pulley | |
| 63923 $111.85 | Vacuum Pump Bracket- Passenger Side | 63845 $287.50 | Vacuum Pump Drive Kit, SBC | |
| 64885 $97.05 | Vacuum Pump V-Belt Pulley | 85465 $136.17 | Vacuum Pump Breather Tank | |
| 85465 $136.17 | Vacuum Pump Breather Tank | 22635 $74.18 | Positive Seal Fitting | |
| 22635 $74.18 | Positive Seal Fitting | 4-Vane Vacuum Pump | ||
| 4-Vane Vacuum Pump | PART # | DESCRIPTION | ||
| PART # | DESCRIPTION | 22641 $966.45 | 4-Vane Vacuum Pump | |
| 22641 $966.45 | 4-Vane Vacuum Pump | 63910 $94.39 | Vacuum Pump Mounting Bracket | |
| 63924 $111.85 | Vacuum Pump Bracket, Driver & Passenger Side | 64885 $97.05 | Vacuum Pump V-Belt Pulley | |
| 64885 $97.05 | Vacuum Pump V-Belt Pulley | 63845 $287.50 | Vacuum Pump Drive Kit, SBC | |
| 63845 $287.50 | Vacuum Pump Drive Kit, SBC | 85465 $136.17 | Vacuum Pump Breather Tank | |
| 85465 $136.17 | Vacuum Pump Breather Tank | 22635 $74.18 | Positive Seal Fitting | |
| 22635 $74.18 | Positive Seal Fitting | Enhanced Vacuum Pump | ||
| Enhanced Vacuum Pump | PART # | DESCRIPTION | ||
| PART # | DESCRIPTION | 22642 $1,079.88 | Enhanced Design Vacuum Pump | |
| 22642 $1,079.88 | Enhanced Design Vacuum Pump | 22644 $1,082.55 | Enhanced Design Vacuum Pump | |
| 22644 $1,082.55 | Enhanced Design Vacuum Pump | 22840 $816.59 | Enhanced Design Vacuum Pump | |
| 22840 $816.59 | Enhanced Design Vacuum Pump | 22842 $938.10 | Enhanced Design Vacuum Pump | |
| 22842 $938.10 | Enhanced Design Vacuum Pump | 64885 $97.05 | Vacuum Pump V-Belt Pulley | |
| 63860 $356.35 | Vacuum Pump Drive Kit | 63845 $287.50 | Vacuum Pump Drive Kit, SBC | |
| 64885 $97.05 | Vacuum Pump V-Belt Pulley | 85465 $136.17 | Vacuum Pump Breather Tank | |
| 85465 $136.17 | Vacuum Pump Breather Tank | 22635 $74.18 | Positive Seal Fitting | |
| 22635 $74.18 | Positive Seal Fitting | Recommended Options | ||
| Recommended Options | PART # | DESCRIPTION | ||
| PART # | DESCRIPTION | 23523 $72.81 | 4" V-Belt Pulley for Drive Mandrels | |
| 23523 $72.81 | 4" V-Belt Pulley for Drive Mandrels | 22633 $218.63 | Vacuum Relief Valve (Pump Mounted) | |
| 22633 $218.63 | Vacuum Relief Valve (Pump Mounted) | 22636 $119.99 | Vacuum Relief Valve (3/8" NPT) | |
| 22636 $119.99 | Vacuum Relief Valve (3/8" NPT) | 22637 $119.99 | Vacuum Relief Valve (3/4"-16) | |
| 22637 $119.99 | Vacuum Relief Valve (3/4"-16) | 22635 $74.18 | -12AN Positive Seal Fitting | |
| 22635 $74.18 | -12AN Positive Seal Fitting | 22649 $187.45 | Vacuum Pump Line Kit | |
| 22649 $187.45 | Vacuum Pump Line Kit | 63859 $380.59 | Drive Mandrel Kit, SBC; mounts to balancer using stock SBC bolt pattern | |
| 63859 $380.59 | Drive Mandrel Kit, SBC; mounts to balancer using stock SBC bolt pattern | |||
| 64886 $180.77 | 28-tooth Gilmer Pump Pulley- uses 3/8" pitch x 3/4" wide belt | |||
| 64886 $180.77 | 28-tooth Gilmer Pump Pulley- uses 3/8" pitch x 3/4" wide belt | |||
| 85471 $180.78 | Air-Oil Separator | |||
| 85471 $180.78 | Air-Oil Separator | 85500 $205.01 | Billet Breather Tank | |
| 85500 $205.01 | Billet Breather Tank | 22632 $28.28 | Vacuum Gauge | |
| 22632 $28.28 | Vacuum Gauge | 89610 $43.04 | Vacuum Gauge Fitting | |
| 89610 $43.04 | Vacuum Gauge Fitting | 63903 | Vacuum Pump Idler Pulley Kit | |
| CHEVROLET BIG BLOCK | . | CHRYSLER SMALL BLOCK continued | ||
| 3-Vane Vacuum Pump | 4-Vane Vacuum Pump | |||
| PART # | DESCRIPTION | PART # | DESCRIPTION | |
| 22640 $832.80 | 3-Vane Vacuum Pump | 64885 $97.05 | Vacuum Pump V-Belt Pulley | |
| 63910 $94.39 | Vacuum Pump Mounting Bracket | 63848 $441.40 | SB Chrysler Vacuum Pump Drive Kit | |
| 64885 $97.05 | Vacuum Pump V-Belt Pulley | 85465 $136.17 | Vacuum Pump Breather Tank | |
| 63844 $291.60 | Vacuum Pump Drive Kit, BBC | 22635 $74.18 | Positive Seal Fitting | |
| 85465 $136.17 | Vacuum Pump Breather | Enhanced Vacuum Pump | ||
| 22635 $74.18 | Positive Seal Fitting | PART # | DESCRIPTION | |
| 4-Vane Vacuum Pump | 22642 $1,079.88 | Enhanced Design Vacuum Pump | ||
| PART # | DESCRIPTION | 22644 $1,082.55 | Enhanced Design Vacuum Pump | |
| 22641 $966.45 | 4-Vane Vacuum Pump | 22840 $816.59 | Enhanced Design Vacuum Pump | |
| 63910 $94.39 | Vacuum Pump Mounting Bracket | 22842 $938.10 | Enhanced Design Vacuum Pump | |
| 64885 $97.05 | Vacuum Pump V-Belt Pulley | 63913 | Vacuum Pump Mounting Bracket | |
| 63844 $291.60 | Vacuum Pump Drive Kit, BBC | 64885 $97.05 | Vacuum Pump V-Belt Pulley | |
| 85465 $136.17 | Vacuum Pump Breather Tank | 63848 $441.40 | SB Chrysler Vacuum Pump Drive Kit | |
| 22635 $74.18 | Positive Seal Fitting | 85465 $136.17 | Vacuum Pump Breather Tank | |
| Enhanced Vacuum Pump | 22635 $74.18 | Positive Seal Fitting | ||
| PART # | DESCRIPTION | Recommended Options | ||
| 22642 $1,079.88 | Enhanced Design Vacuum Pump | PART # | DESCRIPTION | |
| 22644 $1,082.55 | Enhanced Design Vacuum Pump | 23523 $72.81 | 4" V-Belt Pulley for Drive Mandrels | |
| 22840 $816.59 | Enhanced Design Vacuum Pump | 22633 $218.63 | Vacuum Relief Valve (Pump Mounted) | |
| 22842 $938.10 | Enhanced Design Vacuum Pump | 22636 $119.99 | Vacuum Relief Valve (3/8" NPT) | |
| 64885 $97.05 | Vacuum Pump V-Belt Pulley | 22637 $119.99 | Vacuum Relief Valve (3/4"-16) | |
| 63844 $291.60 | Vacuum Pump Drive Kit | 22635 $74.18 | -12AN Positive Seal Fitting | |
| 85465 $136.17 | Vacuum Pump Breather Tank | 22649 $187.45 | Vacuum Pump Line Kit | |
| 22635 $74.18 | Positive Seal Fitting | 64886 $180.77 | 28-tooth Gilmer Pump Pulley- uses 3/8" pitch x 3/4" wide belt | |
| Recommended Options | ||||
| PART # | DESCRIPTION | 85471 $180.78 | Air-Oil Separator | |
| 23523 $72.81 | 4" V-Belt Pulley for Drive Mandrels | 85500 $205.01 | Billet Breather Tank | |
| 22633 $218.63 | Vacuum Relief Valve (Pump Mounted) | 22632 $28.28 | Vacuum Gauge | |
| 22636 $119.99 | Vacuum Relief Valve (3/8" NPT) | 89610 $43.04 | Vacuum Gauge Fitting | |
| 22637 $119.99 | Vacuum Relief Valve (3/4"-16) | 63903 | Vacuum Pump Idler Pulley Kit | |
| 22635 $74.18 | -12AN Positive Seal Fitting | CHRYSLER BIG BLOCK | ||
| 22649 $187.45 | Vacuum Pump Line Kit | 3-Vane Vacuum Pump | ||
| 63849 $373.75 | Drive Mandrel Kit, BBC; mounts using stock BBC bolt pattern | PART # | DESCRIPTION | |
| 68356 $750.49 | Fabricated Aluminum Valve Cover w/ Positive Seal Fitting | 22640 $832.80 | 3-Vane Vacuum Pump | |
| 63912 | Vacuum Pump Mounting Bracket | |||
| 64886 $180.77 | 28-tooth Gilmer Pump Pulley-uses 3/8" pitch x 3/4" wide belt | |||
| 64885 $97.05 | Vacuum Pump V-Belt Pulley | |||
| 85471 $180.78 | Air-Oil Separator | |||
| 63848 $441.40 | SB Chrysler Vacuum Pump Drive Kit | |||
| 85500 $205.01 | Billet Breather Tank | |||
| 85465 $136.17 | Vacuum Pump Breather Tank | |||
| 22632 $28.28 | Vacuum Gauge | |||
| 22635 $74.18 | Positive Seal Fitting | |||
| 89610 $43.04 | Vacuum Gauge Fitting | |||
| 60023 * | Drive Kit Spacer | |||
| 63903 | Vacuum Pump Idler Pulley Kit | |||
| 4-Vane Vacuum Pump | ||||
| CHRYSLER SMALL BLOCK | ||||
| PART # | DESCRIPTION | |||
| 3-Vane Vacuum Pump | 22641 $966.45 | 4-Vane Vacuum Pump | ||
| PART # | DESCRIPTION | 63912 | Vacuum Pump Mounting Bracket | |
| 22640 $832.80 | 3-Vane Vacuum Pump | 64885 $97.05 | Vacuum Pump V-Belt Pulley | |
| 63913 | Vacuum Pump Mounting Bracket | 63848 $441.40 | SB Chrysler Vacuum Pump Drive Kit | |
| 63918 | Adapter Ring (must use with No. 63913) | 85465 $136.17 | Vacuum Pump Breather Tank | |
| 64885 $97.05 | Vacuum Pump V-Belt Pulley | 22635 $74.18 | Positive Seal Fitting | |
| 63848 $441.40 | SB Chrysler Vacuum Pump Drive Kit | 60023 * | Drive Kit Spacer | |
| 85465 $136.17 | Vacuum Pump Breather Tank | Enhanced Vacuum Pump | ||
| 22635 $74.18 | Positive Seal Fitting | PART # | DESCRIPTION | |
| 4-Vane Vacuum Pump | 22642 $1,079.88 | Enhanced Design Vacuum Pump | ||
| PART # | DESCRIPTION | 22644 $1,082.55 | Enhanced Design Vacuum Pump | |
| 22641 $966.45 | 4-Vane Vacuum Pump | *Use Part No. 60023, when using a dry sump/vacuum pump drive kit with a recessed face balancer and a crank trigger; or a recessed or flat-faced balancer and large profile balancer bolt (such as ARP) | ||
| 63913 | Vacuum Pump Mounting Bracket | |||
| 63918 | Adapter Ring (must use with No. 63913) | |||
| . | ||||
| SUGGESTED COMPONENT COMBINATIONS | ||||
| CHRYSLER BIG BLOCK continued | . | FORD SMALL BLOCK continued | ||
| Enhanced Vacuum Pump | Recommended Options | |||
| PART # | DESCRIPTION | PART # | DESCRIPTION | |
| 22840 $816.59 | Enhanced Design Vacuum Pump | 23523 $72.81 | 4" V-Belt Pulley for Drive Mandrels | |
| 22842 $938.10 | Enhanced Design Vacuum Pump | 22633 $218.63 | Vacuum Relief Valve (Pump Mounted) | |
| 63914 | Vacuum Pump Mounting Bracket | 22636 $119.99 | Vacuum Relief Valve (3/8" NPT) | |
| 64885 $97.05 | Vacuum Pump V-Belt Pulley | 22637 $119.99 | Vacuum Relief Valve (3/4"-16) | |
| 63848 $441.40 | SB Chrysler Vacuum Pump Drive Kit | 22649 $187.45 | Vacuum Pump Line Kit | |
| 85465 $136.17 | Vacuum Pump Breather Tank | 64886 $180.77 | 28-tooth Gilmer Pump Pulley-uses 3/8" pitch x 3/4" wide belt | |
| 22635 $74.18 | Positive Seal Fitting | |||
| 60023 * | Drive Kit Spacer | 85471 $180.78 | Oil Air Separator | |
| Recommended Options | 85500 $205.01 | Billet Breather Tank | ||
| PART # | DESCRIPTION | 22632 $28.28 | Vacuum Gauge | |
| 23523 $72.81 | 4" V-Belt Pulley for Drive Mandrels | 89610 $43.04 | Vacuum Gauge Fitting | |
| 22633 $218.63 | Vacuum Relief Valve (Pump Mounted) | 63903 | Vacuum Pump Idler Pulley Kit | |
| 22636 $119.99 | Vacuum Relief Valve (3/8" NPT) | FORD 4.6/5.4L MODULAR | ||
| 22637 $119.99 | Vacuum Relief Valve (3/4"-16) | 3-Vane Vacuum Pump | ||
| 22635 $74.18 | -12AN Positive Seal Fitting | PART # | DESCRIPTION | |
| 22649 $187.45 | Vacuum Pump Line Kit | 22640 $832.80 | 3-Vane Vacuum Pump | |
| 64886 $180.77 | 28-tooth Gilmer Pump Pulley- uses 3/8" pitch x 3/4" wide belt | 64885 $97.05 | Vacuum Pump V-Belt Pulley | |
| 63849 $373.75 * | Vacuum Pump Drive Kit | |||
| 85471 $180.78 | Air-Oil Separator | 85465 $136.17 | Vacuum Pump Breather Tank | |
| 85500 $205.01 | Billet Breather Tank | 22635 $74.18 | -12AN Positive Seal Fitting | |
| 22632 $28.28 | Vacuum Gauge | 4-Vane Vacuum Pump | ||
| 89610 $43.04 | Vacuum Gauge Fitting | |||
| PART # | DESCRIPTION | |||
| 63903 | Vacuum Pump Idler Pulley Kit | |||
| 22641 $966.45 | 4-Vane Vacuum Pump | |||
| FORD SMALL BLOCK | 64885 $97.05 | Vacuum Pump V-Belt Pulley | ||
| 3-Vane Vacuum Pump | 63849 $373.75 * | Vacuum Pump Drive Kit | ||
| PART # | DESCRIPTION | 85465 $136.17 | Vacuum Pump Breather Tank | |
| 22640 $832.80 | 3-Vane Vacuum Pump | 22635 $74.18 | -12AN Positive Seal Fitting | |
| 63911 $118.75 | Vacuum Pump Mounting Bracket | Enhanced Vacuum Pump | ||
| 64885 $97.05 | Vacuum Pump V-Belt Pulley | PART # | DESCRIPTION | |
| 63846 $360.25 | Vacuum Pump Drive Kit, SBF (use w/ stock | 22642 $1,079.88 | Enhanced Design Vacuum Pump | |
| style balancers) | 22644 $1,082.55 | Enhanced Design Vacuum Pump | ||
| 85465 $136.17 | Vacuum Pump Breather Tank | 22840 $816.59 | Enhanced Design Vacuum Pump | |
| 22635 $74.18 | -12AN Positive Seal Fitting | 22842 $938.10 | Enhanced Design Vacuum Pump | |
| 4-Vane Vacuum Pump | 63921 | Vacuum Pump Mounting Bracket | ||
| PART # | DESCRIPTION | 64885 $97.05 | Vacuum Pump V-Belt Pulley | |
| 22641 $966.45 | 4-Vane Vacuum Pump | 63849 $373.75 * | Vacuum Pump Drive Kit | |
| 63911 $118.75 | Vacuum Pump Mounting Bracket | 22635 $74.18 | -12AN Positive Seal Fitting | |
| 64885 $97.05 | Vacuum Pump V-Belt Pulley | Recommended Options | ||
| 63846 $360.25 | Vacuum Pump Drive Kit, SBF (use w/ stock style balancers) | PART # | DESCRIPTION | |
| 23523 $72.81 | 4" V-Belt Pulley for Drive Mandrels | |||
| 85465 $136.17 | Vacuum Pump Breather Tank | 22633 $218.63 | Vacuum Relief Valve (Pump Mounted) | |
| 22635 $74.18 | -12AN Positive Seal Fitting | 22636 $119.99 | Vacuum Relief Valve (3/8" NPT) | |
| Enhanced Vacuum Pump | 22637 $119.99 | Vacuum Relief Valve (3/4"-16) | ||
| PART # | DESCRIPTION | 22649 $187.45 | ||
| Vacuum Pump Line Kit | ||||
| 22642 $1,079.88 | Enhanced Design Vacuum Pump | 64886 $180.77 | 28-tooth Gilmer Pump Pulley-uses 3/8" pitch x 3/4" wide belt | |
| 22644 $1,082.55 | Enhanced Design Vacuum Pump | |||
| 22840 $816.59 | Enhanced Design Vacuum Pump | 85471 $180.78 | Oil Air Separator | |
| 22842 $938.10 | Enhanced Design Vacuum Pump | 85500 $205.01 | Billet Breather Tank | |
| 63915 | Enhanced Vacuum Pump Mounting Bracket | 22632 $28.28 | Vacuum Gauge | |
| 64885 $97.05 | Vacuum Pump V-Belt Pulley | 89610 $43.04 | Vacuum Gauge Fitting | |
| 63846 $360.25 | Vacuum Pump Drive Kit, SBF (use w/ stock | 63903 | Vacuum Pump Idler Pulley Kit | |
| style balancers) | *Note: Customer must use ATI balancer with BBC bolt pattern | |||
| 85465 $136.17 | Vacuum Pump Breather Tank |
|
Radius Tooth Drive Pulleys on pgs. 177-178 |
|
| 22635 $74.18 | -12AN Positive Seal Fitting | |||
| VACUUM PUMP BELT APPLICATION CHART | |||
|
DRIVE BELT APPLICATION CHART FOR ALTERNATOR AND VACUUM PUMP MOUNTING KITS For Moroso Part Nos. 63817, 63818, 63819, 63821, 63822, 63823, 63836, 63837 $472.39 & 63838 $472.39 • Pulley Distance is measured pulley-center to pulley-center • Part numbers listed are for Moroso Radius Tooth Drive Belts |
|||
| Crank Pulley | Vacuum Pump Pulley | Pulley Dist. | Moroso Belt Part # |
| COMBINATION 20-TOOTH CRANK PULLEY WITH 40-TOOTH VACUUM PUMP PULLEY | |||
| 20-Tooth | 40-Tooth | 6.840" | 97141 $29.61 |
| 20-Tooth | 40-Tooth | 7.156" | 97142 $29.61 |
| 20-Tooth | 40-Tooth | 7.806" | 97144 $25.45 |
| 20-Tooth | 40-Tooth | 8.416" | 97146 $32.22 |
| 20-Tooth | 40-Tooth | 8.598" | 97147 $30.98 |
| 20-Tooth | 40-Tooth | 9.381" | 97149 $25.57 |
| 20-Tooth | 40-Tooth | 10.158" | 97151 $33.62 |
| 20-Tooth | 40-Tooth | 10.450" | 97152 $33.62 |
| 20-Tooth | 40-Tooth | 10.947" | 97154 $28.17 |
| 20-Tooth | 40-Tooth | 11.755" | 97156 |
| 20-Tooth | 40-Tooth | 12.056" | 97157 $36.40 |
| 20-Tooth | 40-Tooth | 12.536" | 97159 $29.52 |
| 20-Tooth | 40-Tooth | 12.855" | 97160 |
| 20-Tooth | 40-Tooth | 13.653" | 97162 |
| 20-Tooth | 40-Tooth | 14.133" | 97164 $32.27 |
| . | |||
| COMBINATION 22-TOOTH CRANK PULLEY WITH 40-TOOTH VACUUM PUMP PULLEY | |||
| 22-Tooth | 40-Tooth | 6.710" | 97141 $29.61 |
| 22-Tooth | 40-Tooth | 7.000" | 97142 $29.61 |
| 22-Tooth | 40-Tooth | 7.660" | 97144 $25.45 |
| 22-Tooth | 40-Tooth | 8.279" | 97146 $32.22 |
| 22-Tooth | 40-Tooth | 8.457" | 97147 $30.98 |
| 22-Tooth | 40-Tooth | 9.218" | 97149 $25.57 |
| 22-Tooth | 40-Tooth | 10.000" | 97151 $33.62 |
| 22-Tooth | 40-Tooth | 10.310" | 97152 $33.62 |
| 22-Tooth | 40-Tooth | 10.780" | 97154 $28.17 |
| 22-Tooth | 40-Tooth | 11.619" | 97156 |
| 22-Tooth | 40-Tooth | 11.921" | 97157 $36.40 |
| 22-Tooth | 40-Tooth | 12.397" | 97159 $29.52 |
| 22-Tooth | 40-Tooth | 12.720" | 97160 |
| 22-Tooth | 40-Tooth | 13.528" | 97162 |
| 22-Tooth | 40-Tooth | 13.980" | 97164 $32.27 |
| . | |||
| COMBINATION 26-TOOTH CRANK PULLEY WITH 40-TOOTH VACUUM PUMP PULLEY | |||
| 26-Tooth | 40-Tooth | N/A | 97141 $29.61 |
| 26-Tooth | 40-Tooth | N/A | 97142 $29.61 |
| 26-Tooth | 40-Tooth | 7.375" | 97144 $25.45 |
| 26-Tooth | 40-Tooth | 8.000" | 97146 $32.22 |
| 26-Tooth | 40-Tooth | 8.170" | 97147 $30.98 |
| 26-Tooth | 40-Tooth | 8.950" | 97149 $25.57 |
| 26-Tooth | 40-Tooth | 9.720" | 97151 $33.62 |
| 26-Tooth | 40-Tooth | 10.029" | 97152 $33.62 |
| 26-Tooth | 40-Tooth | 10.504" | 97154 $28.17 |
| 26-Tooth | 40-Tooth | 11.318" | 97156 |
| 26-Tooth | 40-Tooth | 11.622" | 97157 $36.40 |
| 26-Tooth | 40-Tooth | 12.120" | 97159 $29.52 |
| 26-Tooth | 40-Tooth | 12.412" | 97160 |
| 26-Tooth | 40-Tooth | 13.217" | 97162 |
| 26-Tooth | 40-Tooth | 13.687" | 97164 $32.27 |
| . | APPLICATION CHART CONTINUED ON NEXT PAGE | ||
| VACUUM PUMP BELT APPLICATION CHART | |||
| DRIVE BELT APPLICATION CHART FOR ALTERNATOR AND VACUUM PUMP | |||
|
DRIVE BELT APPLICATION CHART FOR ALTERNATOR AND VACUUM PUMP MOUNTING
KITS Continued |
|||
|
. |
Radius Tooth Drive Belts on pg 178 |
||
| Crank Pulley | Vacuum Pump Pulley | Pulley Dist. | Moroso Belt Part # |
| COMBINATION 28-TOOTH CRANK PULLEY WITH 40-TOOTH VACUUM PUMP PULLEY | |||
| 28-Tooth | 40-Tooth | N/A | 97141 $29.61 |
| 28-Tooth | 40-Tooth | N/A | 97142 $29.61 |
| 28-Tooth | 40-Tooth | 7.225" | 97144 $25.45 |
| 28-Tooth | 40-Tooth | 7.842" | 97146 $32.22 |
| 28-Tooth | 40-Tooth | 8.012" | 97147 $30.98 |
| 28-Tooth | 40-Tooth | 8.791" | 97149 $25.57 |
| 28-Tooth | 40-Tooth | 9.563" | 97151 $33.62 |
| 28-Tooth | 40-Tooth | 9.880" | 97152 $33.62 |
| 28-Tooth | 40-Tooth | 10.345" | 97154 $28.17 |
| 28-Tooth | 40-Tooth | 11.160" | 97156 |
| 28-Tooth | 40-Tooth | 11.468" | 97157 $36.40 |
| 28-Tooth | 40-Tooth | 11.958" | 97159 $29.52 |
| 28-Tooth | 40-Tooth | 12.251" | 97160 |
| 28-Tooth | 40-Tooth | 13.051" | 97162 |
| 28-Tooth | 40-Tooth | 13.532" | 97164 $32.27 |
| . | |||
| COMBINATION 30-TOOTH CRANK PULLEY WITH 40-TOOTH VACUUM PUMP PULLEY | |||
| 30-Tooth | 40-Tooth | N/A | 97141 $29.61 |
| 30-Tooth | 40-Tooth | N/A | 97142 $29.61 |
| 30-Tooth | 40-Tooth | 7.084" | 97144 $25.45 |
| 30-Tooth | 40-Tooth | 7.702" | 97146 $32.22 |
| 30-Tooth | 40-Tooth | 7.871" | 97147 $30.98 |
| 30-Tooth | 40-Tooth | 8.658" | 97149 $25.57 |
| 30-Tooth | 40-Tooth | 9.431" | 97151 $33.62 |
| 30-Tooth | 40-Tooth | 9.743" | 97152 $33.62 |
| 30-Tooth | 40-Tooth | 10.196" | 97154 $28.17 |
| 30-Tooth | 40-Tooth | 11.017" | 97156 |
| 30-Tooth | 40-Tooth | 11.325" | 97157 $36.40 |
| 30-Tooth | 40-Tooth | 11.813" | 97159 $29.52 |
| 30-Tooth | 40-Tooth | 12.117" | 97160 |
| 30-Tooth | 40-Tooth | 12.916" | 97162 |
| 30-Tooth | 40-Tooth | 13.386" | 97164 $32.27 |
| . | |||
| COMBINATION 32-TOOTH CRANK PULLEY WITH 40-TOOTH VACUUM PUMP PULLEY | |||
| 32-Tooth | 40-Tooth | N/A | 97141 $29.61 |
| 32-Tooth | 40-Tooth | N/A | 97142 $29.61 |
| 32-Tooth | 40-Tooth | N/A | 97144 $25.45 |
| 32-Tooth | 40-Tooth | 7.555" | 97146 $32.22 |
| 32-Tooth | 40-Tooth | 7.722" | 97147 $30.98 |
| 32-Tooth | 40-Tooth | 8.503" | 97149 $25.57 |
| 32-Tooth | 40-Tooth | 9.278" | 97151 $33.62 |
| 32-Tooth | 40-Tooth | 9.588" | 97152 $33.62 |
| 32-Tooth | 40-Tooth | 10.051" | 97154 $28.17 |
| 32-Tooth | 40-Tooth | 10.875" | 97156 |
| 32-Tooth | 40-Tooth | 11.175" | 97157 $36.40 |
| 32-Tooth | 40-Tooth | 11.662" | 97159 $29.52 |
| 32-Tooth | 40-Tooth | 11.973" | 97160 |
| 32-Tooth | 40-Tooth | 12.769" | 97162 |
| 32-Tooth | 40-Tooth | 13.234" | 97164 $32.27 |
| VACUUM PUMP MOUNTING BRACKETS | ||||
| Moroso offers Anodized Billet Aluminum Vacuum Pump Mounting Brackets that ?t a variety of engine and vacuum pump combinations. These brackets ?t the engines directly, or mount to a motor plate. Refer to the chart below for complete application details. | ||||
| VACUUM PUMP BRACKET APPLICATION CHART | ||||
|
||||
| PART # | ENGINE APPLICATION | Moroso Pump Bracket Was Designed For | Mounting Location | |
| 63910 $94.39 | All Engines | 22640 $832.80 | 22641 $966.45 | With a motorplate |
| 63917 $118.75 | All Engines | 22642 $1,079.88 | 22644 $1,082.55 | With a motorplate |
| 22840 $816.59 | 22842 $938.10 | |||
| 63910 $94.39 | Small & Big Block Chevy | 22640 $832.80 | 22641 $966.45 | Driver/passenger cyl. heads |
| 63917 $118.75 | Small & Big Block Chevy | 22642 $1,079.88 | 22644 $1,082.55 |
Driver/passenger cylinder heads |
| 22840 $816.59 | 22842 $938.10 | |||
| 63922 $111.85 | GM LS | 22640 $832.80 | 22641 $966.45 | Driver side cylinder head |
| 63923 $111.85 | GM LS | 22640 $832.80 | 22641 $966.45 |
Passenger side cylinder head |
| 63924 $111.85 * | GM LS | 22642 $1,079.88 | 22644 $1,082.55 |
Driver/passenger cylinder heads |
| 22840 $816.59 | 22842 $938.10 | |||
| 63911 $118.75 | Small Block Ford | 22640 $832.80 | 22641 $966.45 |
Driver or Passenger cylinder heads |
| 63915 * | Small Block Ford | 22642 $1,079.88 | 22644 $1,082.55 |
Driver or Passenger cylinder heads |
| 22840 $816.59 | 22842 $938.10 | |||
| 63921 * | Ford 4.6/5.4 | 22640 $832.80 | 22641 $966.45 |
OEM, Power Steering Pump Location |
| 22642 $1,079.88 | 22644 $1,082.55 | |||
| 22840 $816.59 | 22842 $938.10 | |||
| 63909 $172.61 | Big Block Ford | 22640 $832.80 | 22641 $966.45 |
Driver or Passenger cylinder heads |
| * Part No.63917 needed with 63914, 63915, 63921, & 63924, to mount enhanced pumps to the mounting bracket. | ||||
| PART # | REPLACEMENT PARTS |
| 63917 $118.75 | Replacement Bracket for Moroso "Enhanced Design" Vacuum Pump Nos. 22642 $1,079.88 and 22842 $938.10 |
| PART # | AVAILABLE OPTIONS |
| 63918 | Adapter Ring. Allows the use of a Moroso "Original" Style Vacuum Pump with No. 63917 $118.75 Mounting Brackets |
| PART # | DESCRIPTION |
| 63903 | Vacuum Pump Idler Pulley Kit, For Moroso Enhanced Vacuum Pumps |
|
.For SBC and BBC, Nippondenso 93 mm, Aftermarket Patent No. D600,720 • These bracket kits are designed to mount mini ND-style and 93mm alternators to either side of the motor, while clearing the electric water pump • Works with most old and new style drive mandrel kits • Includes all spacers and hardware |
| PART # | DESCRIPTION |
| 63827 $272.50 | Alternator Mounting Kit, SBC, Moroso Electric Water Pumps |
| 63828 $269.81 | Alternator Mounting Kit, SBC, CSR Electric Water Pumps |
| 63829 $272.51 | Alternator Mounting Kit, SBC, Meziere Electric Water Pumps |
| 63832 $267.11 | Alternator Mounting Kit, BBC, Moroso Electric Water Pumps |
| 63833 $272.51 | Alternator Mounting Kit, BBC, CSR Electric Water Pumps |
| 63834 $272.51 | Alternator Mounting Kit, BBC, Meziere Electric Water Pumps |
|
.• Two mounts incorporated into one billet aluminum frame
with belt adjustment for alternator and vacuum pump • These bracket kits are designed to mount mini ND-style 93mm alternators and Moroso Nos. 22642, 22644, 22840 $816.59 or 22842 $938.10 Enhanced Design Vacuum Pumps • Works with most old and new style drive mandrel kits, with recommended pulleys (see options, below) |
| PART # | DESCRIPTION |
| 63817 $472.39 | Alternator/Vacuum Pump Mounting Kit, SBC, Moroso Electric Water Pumps 93mm style alternators, Moroso Enhanced Vacuum Pumps |
| 63818 $472.39 | Alternator/Vacuum Pump Mounting Kit, SBC, CSR Electric Water Pumps 93mm style alternators, Moroso Enhanced Vacuum Pumps |
| 63819 $472.39 | Alternator/Vacuum Pump Mounting Kit, SBC, Meziere Electric Water Pumps 93mm style alternators, Moroso Enhanced Vacuum Pumps |
| 63836 $472.39 | Alternator/Vacuum Pump Mounting Kit, BBC, Moroso Electric Water Pumps 93mm style alternators, Moroso Enhanced Vacuum Pumps |
| 63837 $472.39 | Alternator/Vacuum Pump Mounting Kit, BBC, CSR Electric Water Pumps 93mm style alternators, Moroso Enhanced Vacuum Pumps |
| 63838 $472.39 | Alternator/Vacuum Pump Mounting Kit, BBC, Meziere Electric Water Pumps 93mm style alternators, Moroso Enhanced Vacuum Pumps |
| PART # | RECOMMENDED PAN OPTIONS |
| 23540 $133.47 | Pump Pulleys 40 Tooth, SBC, BBC |
| 23533 $57.98 | Crankshaft Pulley, 20 Tooth, BBC |
| 23534 $66.03 | Crankshaft Pulley, 22 Tooth, SBC |
| 97149 $25.57 | Radius Tooth Belt, SBC |
| 97151 $33.62 | Radius Tooth Belt, BBC |
| .For BBC Chevy with Moroso Enhanced Vacuum Pumps & 130mm style alternators Patent No. D600,720 |
|
.• Two mounts are incorporated into one billet aluminum
frame with belt adjustment for alternator and vacuum pump • Bracket kit was designed to mount full size 130 mm Alternators such as East Coast 2007, 2008, & 2009, series, also fits CS121, style Alternators and Moroso Part Nos. 22642, 22644, 22840, or 22842, Enhanced Design Vacuum Pumps • Mounts Alternator on driver's side and Vacuum Pump on passenger's side while clearing the electric water pump • Works with most styles of drive mandrel kits • Includes all spacers and hardware |
| PART # | DESCRIPTION |
| 63865 $500.72 | Alternator/Vacuum Pump Mounting Kit, Moroso Electric Water Pumps, 130mm style alternators, Moroso Enhanced Vacuum Pumps 63866 $500.72 Alternator/Vacuum Pump Mounting Kit, BBC, CSR Electric Water Pumps the latest version of, which have a profiled silhouette and countersunk fasteners,130mm style alternators, Moroso Enhanced Vacuum Pumps |
| 63867 $500.72 | Alternator/Vacuum Pump Mounting Kit, BBC, Meziere Electric Water Pumps, 130mm style alternators, Moroso Enhanced Vacuum Pumps |
|
.ALTERNATOR AND VACUUM PUMP MOUNTING KITS WITH TENSIONER For BBC Chevy with Moroso Enhanced Vacuum Pumps & 130mm stylealternators Patent No. D600,720 |
|
.• Two mounts are incorporated into one billet aluminum
frame with belt adjustment for alternator and vacuum pump • Bracket kit was designed to mount full size 130 mm Alternators such as East Coast 2007, 2008, & 2009, series, also fits CS121 style Alternators and Moroso Nos. 22642, 22644, 22840, or 22842, Enhanced Design Vacuum Pumps • Unique tensioner system with heavy duty/high speed bearing reduces belt flap throughout rpm range • Mounts Alternator on driver's side and Vacuum Pump on passenger's side while clearing the electric water pump • Designed to work with Moroso Part No. 63844 $291.60 and other 5" long drive mandrel kits • Includes all spacers and hardware |
| PART # | DESCRIPTION |
| 63875 | Alternator/Vacuum Pump Mounting Kit with Tensioner, BBC, Moroso Electric Water Pumps, 130mm style alternators, Moroso Enhanced Vacuum Pumps |
| 63876 | Alternator/Vacuum Pump Mounting Kit with Tensioner, BBC, CSR Electric Water Pumps, (Latest CSR Electric Water Pumps have a profiled silhouette & countersunk fasteners), 130mm style alternators, Moroso Enhanced Vacuum Pumps |
| 63877 | Alternator/Vacuum Pump Mounting Kit with Tensioner, BBC, Meziere Electric Water Pumps, 130mm style alternators, Moroso Enhanced Vacuum Pumps |
|
.ALTERNATOR AND VACUUM PUMP MOUNTING KITS For Ford 289-302, 351W Patent No. D600,720 |
|
.• Two mounts incorporated into one billet aluminum frame
with belt adjustment for alternator and vacuum pump • Thees bracket kits are designed to mount mini ND Style 93mm Alternators and Moroso No. 22642, No. 22644, No. 22840, or No. 22842, Enhanced Design Vacuum Pumps • Mounts alternator on driver-side and vacuum pump on passenger-side, while clearing the electric water pump • Works with most old and new style drive mandrel kits, with recommended pulleys (see options, above) |
| PART # | REPLACEMENT PART |
| 63821 $472.38 | Alternator and Vacuum Pump Mounting Kit, Ford 289/302/351W, use with Meziere Electric Water Pumps and Moroso Enhanced Design Vacuum Pumps |
| 63822 $472.38 | Alternator and Vacuum Pump Mounting Kit, Ford 289/302/351W, use with Moroso Electric Water Pumps and Moroso Enhanced Design Vacuum Pumps |
| 63823 $480.53 | Alternator and Vacuum Pump Mounting Kit, Ford 289/302/351W, use with CSRTM Electric Water Pumps and Moroso Enhanced Design Vacuum Pumps |
|
.ALTERNATOR/VACUUM PUMP MOUNTING KIT Fits: Ford 289, 302, 351W, CSR Electric Water Pumps (Latest Version) Patent No. D600,720 |
|
.• Fits the latest version of the CSR Ford 289, 302, 351W
Electric Water Pumps which have a profiled silhouette and countersunk
fasteners. • For earlier design CSR Ford 289, 302, 351W Electric Water Pumps use Part No. 63823 $480.53 • Two mounts are incorporated into one billet aluminum frame with belt adjustment for alternator and vacuum pump • Bracket kit was designed to mount mini ND Style 93mm Alternators and Moroso Part Nos. 22642, 22644, 22840 $816.59 or 22842 $938.10 Enhanced Design Vacuum Pumps • Mounts Alternator on driver's side and Vacuum Pump on passenger's side while clearing the electric water pump • Works with most styles of drive mandrel kits • Includes all spacers and hardware |
| PART # | DESCRIPTION |
| 63824 $491.20 | Alternator/Vacuum Pump Mounting Kit, Ford 289, 302, 351W use with CSR Electric Water Pumps (Latest Version) and Moroso Enhanced Design Vacuum Pumps |
|
.• This bracket kit is designed to mount any GM Delcotron
alternator to Small Blockand 90° V6 Chevy with a short water
pump (right side mount) • Although designed primarily for Circle Track, this kit can be used in many otherapplications where a compact, rugged alternator mount is needed • Use with Moroso Alternator Pulley No. 64800 $53.88 • Early model heads need to be drilled and tapped |
| PART # | DESCRIPTION |
| 63825 $91.62 | Alternator Mount Kit, GM Delcotron |
|
.• This kit enables the racer/enthusiast to mount either
a 93mm or 115mm Nipondenso alternator to a Chrysler “A”
series engine, (318, 340 & 360) in as many as fourteen different
configurations • Fits with stock mechanical water pumps and Moroso electric water pumps • Mounts alternator to either side of engine • Enables the use of lighter weight alternators • Adjustable turnbuckle makes for easy and accurate belt tension adjustments • Use with Moroso Drive Kit No. 63848 $441.40 • Kit Includes all mounting hardware |
| PART # | DESCRIPTION |
| 63815 $202.39 | Billet Aluminum Alternator Mounting Bracket, Small Block Chrysler |
|
.• Will mount standard Ford or ND-style alternator on either
side of engine • Fits with mechanical and electric water pumps from all major manufacturers with V-belt pulley systems • Provides an alternative to running the stock serpentine belt • Use with Moroso Drive Kit No. 63846 $360.25 • Kit Includes all mounting hardware |
| PART # | DESCRIPTION |
| 63810 $201.08 | Aluminum Alternator Mounting Bracket, Small Block Ford |
| PART # | AVAILABLE OPTIONS |
| 23523 $72.81 | 4" O.D. Mandrel Pulley, V-Belt |
| .Moroso has engineered Alternator Mount Kits and Alternator Drive Kits for popular engines using an electric water pump or electric water pump drive kit. The Drive Kits work with or without crank triggers or engine plates |
|
.• Alternator Mount Kits include all hardware needed to
mount old-style Delco alternators to the driver’s side of
the engine • Alternator Drive Kits are crankshaft-mounted and designed with spacers that can be replaced with pulleys to drive other accessories such as external oil pumps and vacuum pumps |
| PART # | REPLACEMENT PART |
| 63842 $83.55 | Alternator Mount Kit, SBC |
| 63843 $287.50 | Alternator Drive Kit, SBC, use No. 97170 $107.93 Gilmer Drive Pulley if external oil pump is used. Comes completewith all spacers and hardware |
| PART # | DESCRIPTION |
| 63750 $174.03 | Universal Electric Water Pump Drive Kit |
| 63500 $223.92 63505 | SBC Aluminum Water Pumps |
| 63539 63546 63555 63557 $557.42 | Electric Water Pumps |
| ADDITIONAL PART | |
| 23523 $72.81 | 4" Crank Pulley |
| PART # | DESCRIPTION |
| 63840 $83.54 | Alternator Mount Kit, Big Block Chevy with early style Delco alternator |
| 63841 $290.21 | Alternator Drive Kit, Big Block Chevy, use No. 97170 $107.93 Gilmer Drive Pulley if external oil pump is used. Comes complete with all spacers and hardware. |
| PART # | DESCRIPTION |
| 63750 $174.03 | Universal Electric Water Pump Drive Kit |
| 63546 63547 $515.46 | Electric Water Pumps |
| ADDITIONAL PART | |
| 23523 $72.81 | 4" Crank Pulley |
|
This kit mounts an early-style GM Power Steering Pump (with integral
reservoir removed) or a Lee, Profile or Cavalier racing power
steering pump to the driver¡&hibar;s side head of a Small
Block Chevy . Manufactured from 3/8" 6061-T6 aluminum, anodized . Can be shimmed to align any pulley combination . Comes complete with all necessary fasteners |
| PART # | DESCRIPTION |
| 63895 $97.02 | Power Steering Pump Mounting Bracket, Small Block Chevy, Early-Style GM Pump |
|
. This kit mounts a late-model, small-style GM power steering
pump (with remote reservoir) or Sweet-type pumps to the driver¡&hibar;s
side cylinder head of a Small Block Chevy. Use with Moroso Pump
Pulley No. 64860 $110.55 . Manufactured from 3/8" 6061-T6 aluminum, anodized . Comes complete with all necessary spacers and hardware |
| PART # | DESCRIPTION |
| 63897 $141.55 | Power Steering Pump Mounting Bracket, SBC, Late Model GM Pump |
|
.. Extra long to accommodate any combination . Steel, self-centering mandrel bolts directly to harmonic balancer for dead-accurate concentricity . Pulleys are 6061-T6 aluminum and hard coat anodized for exceptional strength and extended service life . Includes: 2 1/2" V-belt pulley for vacuum pump, 1" (16-tooth) Gilmer pulley for external oil pump, guide plates, assorted spacers, belt guides & hardware . For optimum accessory speed, use with Moroso Dry Sump Gilmer Pulleys, and Vacuum Pump V-Belt Pulley No. 64885. |
| PART # | DESCRIPTION |
| 63844 $291.60 | Vacuum Pump, Dry Sump Pump Kit, BBC, uses 5" mandrel length |
| 63845 $287.50 | Vacuum Pump, Dry Sump Pump Kit, SBC, uses 4.75" mandrel length |
| PART # | REPLACEMENT PARTS |
| 23528 $130.75 | Pulley, Gilmer Drive, 28-Tooth |
| 23532 $130.75 | Pulley, Gilmer Drive, 32-Tooth |
| 97170 $107.93 | Pulley, Gilmer Drive Crankshaft, 16-Tooth |
| PART # | AVAILABLE OPTIONS |
| 23523 $72.81 | 4" O.D. Mandrel Pulley, V-Belt |
| .Fits: Small Block Ford 302-351W with either three or four mounting bolts (3.30" bolt circle, 2.432" male register.will NOT fit 289) |
|
.. Hub mounted to harmonic balancer . 6061-T6 Aluminum Pulleys are hard coat anodized for strength and extended service life . Includes: 2 1/2" V-belt pulley for vacuum pump, 1" (16-tooth) Gilmer pulley for external oil pump, guide plates, assorted spacers, belt guides and hardware |
| PART # | DESCRIPTION |
| 63846 $360.25 | Vacuum Pump, Dry Sump Pump Kit, 5.80" overall length (with spacer) |
| PART # | AVAILABLE OPTION |
| 23523 $72.81 | 4" O.D. Mandrel Pulley, V-Belt |
|
. Pulleys are 6061-T6 aluminum and hard coat anodized and mandrel
is black anodized for exceptional strength and extended service
life . Extra long to accommodate any combination . 6-bolt self-centering aluminum hub fastens to balancer; steel mandrel mounts to hub and provides rigid pulley mounting . Includes: Steel Mandrel, 4" V-belt pulley for alternator, 2 1/2" V-belt pulley for vacuum pump, 1" (16-tooth) Gilmer pulley for external oil pump, guide plates, assorted spacers, belt guides and hardware |
| PART # | DESCRIPTION |
| 63848 $441.40 | Vacuum Pump, Dry Sump Pump Kit, 5.70" overall length |
|
Bolts to balancer.balancer does not need to be drilled like older
designs . Pulleys are hard coat anodized and mandrel is black oxide for exceptional strength and extended service life . Kits include: one-piece, forged steel drive mandrel, 4" V-belt pulley for alternator, 2 1/2" V-belt pulley for vacuum pump, 1" (16 tooth) Gilmer pulley for external oil pump, guide plates, assorted spacers, belt guides and hardware |
| PART # |
Engine Appl. |
Style | Mandrel Length Minus Flange | Required Balancer | Length |
| 63857 $364.32 * | SBC | Short | 2.990" | 3-Bolt, 3.20" bolt circle** | 3.380" |
| 63859 $380.59 * | SBC | Long | 4.000" | 3-Bolt, 3.20" bolt circle** | 4.655" |
| 63860 $356.35 | GM LS Series | Short | 2.990" | Aftermarket, using BBC 3-Bolt, 3.20" bolt circle, 2.050" female register pattern | 3.645" |
| 63858 $356.35 | BBC | Short | 2.990P | 3-Bolt, 3.20" bolt circle, 2.275" femaleregister | 3.645" |
| 63849 $373.75 | BBC | Long | 4.000" | 3-Bolt, 3.20" bolt circle, 2.275" female register | 4.655" |
| 63853 $398.25 | SBF | Short | 3.500" | 4-Bolt, 3.30" bolt circle, 2.382" male register | 4.125" |
| 63847 $387.32 | BBF 429- 460 | Long | 3.500" | 4-Bolt, 3.30" bolt circle, 2.180" male register | 5.285" |
|
.*For SBC 1/4" thick crank trigger wheels, use part No.
63861 $57.87 Drive Mandrel Spacer Kit (see below) **Centers off of I.D. of Balancer, via supplied crankbolt washer |
|
. For use with Moroso Nos. 63857 $364.32 & 63859 $380.59
drive mandrels . Maintains register of mandrel when using a 1/4" thick crank trigger . Comes with a 1/4" longer crankshaft bolt . Constructed out of stress-proof steel with a black oxide finish |
| PART # | DESCRIPTION |
| 63861 $57.87 | Drive Mandrel Spacer Kit, SBC, for 1/4" Thick Crank Trigger Wheels |
|
.• Bolts to the balancer –balancer does not need to
be drilled like older designs • Using our optional pulleys, custom tailored drives can be created • Includes one-piece, forged steel drive mandrel, guide plates, assorted spacers, belt guides and hardware |
| PART # |
Engine Appl. |
Style | Mandrel Length Minus Flange |
Required Balancer |
Length |
| 63880 $256.37 * | SBC | Short | 2.990" | 3-Bolt, 3.20" bolt circle** | 3.380" |
| 63881 $337.41 | SBC | Long | 4.000" | 3-Bolt, 3.20" bolt circle** | 4.655" |
| 63882 $268.53 | GM LS Series | Short | 2.990" | Aftermarket, using BBC 3-Bolt, 3.20" bolt circle, 2.050" female register pattern | 3.645" |
| 63883 $254.99 | BBC | Short | 2.990" | 3-Bolt, 3.20" bolt circle, 2.275" female register | 3.645" |
| 63884 $315.72 | BBC | Long | 4.000" | 3-Bolt, 3.20" bolt circle, 2.275" female register | 4.655" |
| 63885 $246.98 | SBF | Short | 3.500" | 4-Bolt, 3.30" bolt circle, 2.382" male register | 4.125" |
| 63886 $333.26 | BBF 429-460 | Long | 3.500" | 4-Bolt, 3.30" bolt circle, 2.180" male register | 5.285" |
|
.*For SBC 1/4" thick crank trigger wheels, use part No. 63861 $57.87 Drive Mandrel Spacer Kit, page 170) **Centers off of I.D. of Balancer, via supplied crankbolt washer |
| PART # | DESCRIPTION |
| 97110 $44.37 | Gilmer Drive Belt - 22.5" long |
| 97120 $44.37 | Gilmer Drive Belt - 24.0" long |
| 97130 $47.06 | Gilmer Drive Belt - 25.5" long |
| 97140 $47.06 | Gilmer Drive Belt - 27.0" long |
| 23528 $130.75 | Gilmer Drive Pump Pulley - 28-tooth. For Nos. 23600, 23610, 23620, 23630, 23660, 23670 and 23672 |
| 23532 $130.75 | Gilmer Drive Pump Pulley - 32-tooth |
| 97170 $107.93 | Gilmer Drive Crankshaft Pulley - 16-tooth. For Nos. 23600, 23610, 23620, 23630, 23660, 23670 and 23672 |
| 23520 $52.56 | V-Belt Crankshaft Pulley - 2.5” long |
| 23523 $72.81 | V-Belt Crankshaft Pulley - 4” long |
|
. Made from 6061-T6 Aluminum . .062 thick with 1.00 hole in center and provision for 1/8" keyway . 2 per package. |
| PART # | DESCRIPTION |
| 23560 $10.76 | Belt Guide, 2.50" Diameter |
| 23561 $21.51 | Belt Guide, 3.50" Diameter |
| 23562 $24.12 | Belt Guide, 4.50" Diameter |
| PART # | DESCRIPTION |
| 64031 $40.45 | Crank Pulley Shim Kit |
| Fits: Chevrolet V8 and 90º V6 with OEM crank pulley (GM #3858533), also fits some inline Chevy 6’s. |
| PART # | DESCRIPTION |
| 64030 | Crankshaft Pulley Reinforcement Plate |
|
. Precision machined from high grade, lightweight aluminum castings . Extra-deep belt grooves provide added belt retention during rapid changes in engine RPM . Small pulley diameter slows fan, water pump, and alternator speed to reduce horsepower-robbing drag . High RPM water pump operation is improved, reducing impeller speed below cavitation threshold . Use 36‹ x 17/32" wide belt |
| PART # | DESCRIPTION |
| 64050 $57.92 | Crankshaft Pulley, single groove, 30% reduction, 5.25" O.D. Fits: SBC, 1968-earlier (with short water pump) |
| 64060 $84.94 | Crankshaft Pulley, double groove, 25% reduction, 5.40" O.D. Fits: SBC, 1968-earlier (with short water pump) |
| 64070 $59.31 | Crankshaft Pulley, single groove, 50% reduction, 4.00" O.D. Fits: SBC, 1968-earlier (with short water pump) |
| 64100 $88.91 | Crankshaft Pulley, single groove, 50% reduction, 4.00" O.D. Fits: SBC, 1969-later (with long water pump) |
| 64110 $88.91 | Crankshaft Pulley, double groove, 50% reduction, 4.04" O.D. Fits: SBC and 90o V6 Chevys, 1969-later (with long water pump) |
| 64120 $93.08 | Crankshaft Pulley, single groove, 30% reduction, 4.95" O.D. Fits: Chevrolet 302-350, 1969 and later (with long water pump) |
| 64200 $63.40 | Crankshaft Pulley, single groove, 30% reduction, 5.25" O.D. Fits: Chevrolet 396-454, pre-1969 (with short water pump) |
| 64210 $85.05 | Crankshaft Pulley, double groove, 25% reduction, 5.40" O.D. Fits: Chevrolet 396-454, pre-1969 (with short water pump) |
| 64550 $103.75 |
Crankshaft Pulley, double groove, 4" dia., fits all 4 bolt
dampeners, reduction ratio varies, 4.00" O.D. Fits: Ford 351-400 Cleveland, Boss 302 |
| 64700 $103.75 | Crankshaft Pulley, single groove, with standard dampener, 30% reduction, 5.00" O.D. Fits: Chrysler 340-440, pre-1972 |
|
. Large diameter reduces alternator speed for high engine RPM
applications . Machined from high grade, lightweight aluminum to reduce alternator bearing loads . Deep groove helps retain V-belt at high RPM . Uses 36‹ x 17/32" V-belts |
| PART # | DESCRIPTION |
| 64800 $53.88 | Alternator Pulley, single groove V-belt. 5.00" O.D. Fits: For GM and Ford Alternators with 21/32" dia. shaft |
|
. Machined from the highest grade aircraft billet aluminum for maximum durability . Deep precision machined grooves ensure belt retention even during extreme changes in engine RPM . When crankshaft and water pump pulleys are used together, water pump speed is reduced by approximately 30% . Hard-coat anodized for extended life . Uses 36o x 17/32" wide belt |
| PART # | REPLACEMENT PART |
| 64051 $97.04 | Crankshaft Pulley, Billet, single groove, 30% reduction, 5.25" O.D. Fits: SBC, 1968-earlier (with short water pump) |
| 64111 $122.70 | Crankshaft Pulley, Billet, double groove, 50% reduction, 4.04" O.D. Fits: SBC and 90o V6 Chevys, 1969-later (with long water pump) |
| 64201 $101.18 | Crankshaft Pulley, Billet. single groove, 30% reduction, 5.25" O.D. Fits: BBC, 1968-earlier (with short water pump) |
| 64211 $120.06 | Crankshaft Pulley, Billet. double groove, 25% reduction, 5.40" O.D. Fits: BBC, 1968-earlier (with short water pump) |
| 64551 $134.91 | Crankshaft Pulley, Billet, double groove, 4" dia. fits all 4-bolt dampeners, reduction ratio varies, 4.00" O.D. Fits: Ford 351-400 Cleveland, Boss 302 |
|
. Ideal for driving alternators and/or vacuum pumps at optimum
speed . Fits any 1" dia. crank-driven mandrel with 1/8" x 1/8" keyway . CNC machined from billet aluminum with hard-coat anodized finish . May be used with Moroso Vacuum Pumps Nos. 22640, 22641, 22642, 22644, 22840, 22842, 22843, and Vacuum Pump Pulley No. 64885. |
| PART # | DESCRIPTION |
| 23520 $52.56 | 2.5" V-Belt Crankshaft Pulley |
| 23523 $72.81 | 4" V-Belt Crankshaft Pulley |
|
. Designed for Oval Track and Road Race applications using the
late model, small GM power steering pump with remote reservoir . 6" diameter, hard-coat anodized billet aluminum . Deep-grooved to ensure belt retention under extreme racing conditions . Can be used as replacement pulley for Sweet-type pumps . Use with 36‹ x 1/2" wide belt |
| PART # | REPLACEMENT PART |
| 64860 $110.55 | Power Steering Pulley |
|
. Machined from the highest grade aircraft billet aluminum for
maximum durability . Deep precision machined grooves ensure belt retention even during extreme changes in engine RPM . When crankshaft and water pump pulleys are used together, water pump speed is reduced by approximately 30% . Hard-coat anodized for extended life |
| PART # | DESCRIPTION |
| 64870 $83.63 | Billet Aluminum Alternator Pulley. Single groove, 5" O.D. Use 36‹ x 1/2" wide belt Fits: GM and Ford Alternators with 21/32" dia. shaft |
|
• Fits Moroso Racing Vacuum Pumps or similar "smog"
pumps that use OE-style, 3-bolt mounting pattern • Precision machined from the highest grade aircraft aluminum and hard-coat anodized for extended service life • Deep V-groove ensures belt retention under all racing conditions • Machined with six holes to reduce weight • 5" diameter pulley uses stock (3-bolt) mounting pattern with 1/16" bolt circle • Use with Moroso Vacuum Pump Nos. 22640, 22641, 22642, 22644, 22840, 22842, and 22843. |
| PART # | DESCRIPTION |
| 64885 $97.05 | Vacuum Pump V-Belt Pulley |
|
. Allows Moroso Vacuum Pumps to be installed in cars with minimal
drive mandrel space . Hard coat anodized . Offset 7/8", 5" diameter pulley uses stock (3-bolt) mounting pattern with 1/16" bolt circle . Use with Moroso Vacuum Pump Nos. 22640, 22641, 22642, 22644, 22840, 22842, and 22843. |
| PART # | DESCRIPTION |
| 64887 $102.40 | Vacuum Pump Pulley, Offset |
| PART # | DESCRIPTION |
| 97170 $107.93 | Crankshaft Pulley, Gilmer Style, 3/8" Pitch, 1" Wide,16-teeth |
| 97171 $97.15 | Crankshaft Pulley, Gilmer Style, 3/8" Pitch, 1" Wide, 18-teeth |
| 97172 $78.15 | Crankshaft Pulley, Gilmer Style, 3.8h Pitch, 1/2" Wide, 18-teeth |
|
. Machined from billet aluminum for unmatched precision . Hard-coat anodized for extended durability . 3/8" pitch pulleys fit 5/8" diameter shafts . Use with Moroso Gilmer Drive Pulleys to suit desired drive ratio . Compatible with 3/8" pitch gilmer tooth drive pulleys and belts manufactured by Moroso and others . Includes key and 4 set screws to lock pulley to the shaft |
| PART # | DESCRIPTION |
| 23528 $130.75 | Dry Sump Pump Pulley, Gilmer Style, 28-teeth |
| 23532 $130.75 | Dry Sump Pump Pulley, Gilmer Style, 32-teeth |
|
. Fits Moroso Racing Vacuum Pumps or similar "smog"
pumps that use OE-style, 3-bolt mounting pattern; accepts standard
gilmer belts with 3/4" width or less . Precision machined from aircraft-quality aluminum with hard-coat anodized finish for extended service life and features direct, bolt-on installation . Use with Moroso 3- or 4-Vane Racing Vacuum Pump Nos. 22640, 22641, 22642, 22643, 22644, 22840, 22842, 22843, and interchangeable drive components |
| PART # | DESCRIPTION |
| 64886 $180.77 | Vacuum Pump Pulley, Gilmer Type, 28 Tooth |
| PART # | AVAILABLE OPTIONS |
| 97172 $78.15 | Crankshaft Pulley |
|
. Fits Moroso Racing Vacuum Pumps or similar "smog"
pumps that use OE-style, 3-bolt mounting pattern; accepts standard
Gilmer belts with 1/2" width or less . Precision machined from aircraft-quality aluminum and features direct, bolt-on installation . Use with Moroso 3- or 4-Vane Vacuum Pump Nos. 22640, 22641, 22642, 22643, 22644, 22840, 22842 $938.10 and interchangeable drive components |
| PART # | DESCRIPTION |
| 64888 $142.99 | Vacuum Pump Pulley, Gilmer Type, 36 Tooth |
| PART # | AVAILABLE OPTIONS |
| 97172 $78.15 | Crankshaft Pulley |
|
Radius Tooth Dry Sump Pump Pulleys and Drive
Pulleys Moroso black anodized Radius Tooth Pump Pulleys are designed to work more efficiently and take less power to drive your dry sump pump. These Pulleys are made to use a 1.00" wide drive belt, and with a wide variety of sizes, most drive ratios you may need are achievable. All dry sump pulleys are made to accept a 5/8" shaft, and come with 4 set screws to lock the pulley to the shaft. Moroso Radius Tooth Pump Pulleys are designed with the same 8mm tooth technology, and will add to the efficiency of the entire round tooth drive combination. |
| Available in sizes that will not only give you the ratio you want, but will adjust the centerline measurement between your pump and crankshaft center. This will help in tight fitting conditions while allowing you to have the correct drive ratio. Moroso drive pulleys fit any 1.00" mandrel with a 1/8" keyway slot. |
|
Pump Pulley Part # |
No. oF teeth |
Drive Pulley Part # |
No. oF teeth |
Drive ratio |
| 23544 $110.62 | 30 | 23541 $52.60 | 20 | 67% |
| 30 | 23542 $66.06 | 22 | 73% | |
| 30 | 23543 $56.52 | 24 | 80% | |
| 23545 $115.91 | 32 | 23541 $52.60 | 20 | 63% |
| 32 | 23542 $66.06 | 22 | 69% | |
| 32 | 23543 $56.52 | 24 | 75% | |
| 23546 $117.30 | 34 | 23541 $52.60 | 20 | 59% |
| 34 | 23542 $66.06 | 22 | 65% | |
| 34 | 23543 $56.52 | 24 | 71% | |
| 23547 $124.12 | 36 | 23541 $52.60 | 20 | 56% |
| 36 | 23542 $66.06 | 22 | 61% | |
| 36 | 23543 $56.52 | 24 | 67% | |
| 23548 $125.40 | 40 | 23541 $52.60 | 20 | 50% |
| 40 | 23542 $66.06 | 22 | 55% | |
| 40 | 23543 $56.52 | 24 | 60% |
|
Moroso Radius Tooth Vacuum Pump Pulleys are designed to work
more efficiently and take less power to drive your vacuum pump.
Moroso Radius Tooth Vacuum Pump Pulleys are made to use a .500"
wide drive belt, and with a wide variety of drive pulley sizes,
most drive ratios you may need are achievable. This pulley is
made to accept a 1/2" shaft, 3-hole OEM design. Moroso Radius Tooth Drive Pulleys are designed with the latest 8mm tooth technology, and will add to the efficiency of the entire round tooth drive combination. Available in sizes that will not only give you the ratio you want, but will adjust the centerline measurement between your |
|
Pump Pulley Part # |
No. oF teeth |
Drive Pulley Part # |
No. oF teeth |
Drive ratio |
| 23533 $57.98 | 20 | 23540 $133.47 | 40 | 50% |
| 23534 $66.03 | 22 | 23540 $133.47 | 40 | 55% |
| 23535 $59.24 | 24 | 23540 $133.47 | 40 | 60% |
| 23537 | 28 | 23540 $133.47 | 40 | 70% |
| 23538 | 30 | 23540 $133.47 | 40 | 80% |
| 23539 | 32 | 23540 $133.47 | 40 | 75% |
| Moroso Radius Tooth Alternator Pulley is designed to work more efficiently and take less power to drive. Moroso Radius Tooth Alternator Pulley is made to use a .500" wide drive belt, and with a wide variety of drive pulley sizes, any drive ratio you may need is achievable. This pulley is made to accept a .590" diameter shaft alternator. |
|
Pump Pulley Part # |
No. oF teeth |
Drive Pulley Part # |
No. oF teeth |
Drive ratio |
| 23556 $74.10 | 20 | 23558 $91.69 | 40 | 200% |
|
Fits: Radius Tooth Pulleys with 8mm Pitch . Provides higher power and torque transmission, improved meshing to reduce tooth jump, greater resistance to tooth shear and reduced friction to extend belt life . Fiberglass cord is wound across the entire width of the belt to minimize stretching . Belt body is manufactured from a synthetic neoprene compound that resists heat, oils, ozone and aging . Tough nylon fabric is bonded to the tooth surface for greater wear resistance |
| PART # | Description | Length x width (MM) | Teeth |
| 97105 $44.47 | Radius Tooth Belt | 21"x 1" (533 x 25.4) | 67 |
| 97115 $47.20 | Radius Tooth Belt | 22" x 1" (559 x 25.4) | 70 |
| 97125 $47.10 | Radius Tooth Belt | 23.6" x 1" (599 x 25.4) | 75 |
| 97135 $48.55 | Radius Tooth Belt | 25/2" x 1" (641 x 25.4) | 80 |
| 97136 $60.70 | Radius Tooth Belt | 25/8" x 1" (655 x 25.4) | 82 |
| 97138 $60.70 | Radius Tooth Belt | 26/8" x 1" (681 x 25.4) | 85 |
|
. For Moroso Dry Sump Pump setups . Will also work with other manufacturersf 3/8" pitch Gilmer Drive setups |
| PART # | Description | Length x width (MM) | Teeth |
| 7110 | Gilmer Drive Belt | 22.5" x 1" (572 x 25.4) | 60 |
| 97120 $44.37 | Gilmer Drive Belt | 24" x 1" (610 x 25.4) | 64 |
| 97130 $47.06 | Gilmer Drive Belt | 25.5" x 1" (648 x 25.4) | 68 |
| 97140 $47.06 | Gilmer Drive Belt | 27" x 1" (686 x 25.4) | 72 |
| 97113 $38.96 | Gilmer Drive Belt | 22.5" long x 1/2" wide | 60 |
| 97123 $38.96 | Gilmer Drive Belt | 24" long x 1/2" wide | 64 |
| 97133 $40.45 | Gilmer Drive Belt | 25.5" long x 1/2" wide | 68 |
| 97143 $40.45 | Gilmer Drive Belt | 27" long x 1/2" wide | 72 |
| PART # | Description | Length x width (MM) | Teeth |
| 97141 $29.61 | Tooth Belt | 23.3" x 1/2" (592 x 12.7) | 74 |
| 97142 $29.61 | Tooth Belt | 23.9" x 1/2" (608 x 12.7) | 78 |
| 97144 $25.45 | Tooth Belt | 25/2" x 1/2" (640 x 12.7) | 80 |
| 97146 $32.22 | Tooth Belt | 26.5" x 1/2" (672 x 12.7) | 83 |
| 97147 $30.98 | Tooth Belt | 26/8" x 1/2" (680 x 12.7) | 85 |
| 97149 $25.57 | Tooth Belt | 28.3" x 1/2" (720 x 12.7) | 90 |
| 97151 $33.62 | Tooth Belt | 29.9" x 1/2" (760 x 12.7) | 97 |
| 97152 $33.62 | Tooth Belt | 30.6" x 1/2" (776 x 12.7) | 99 |
| 97154 $28.17 | Tooth Belt | 31.5" x 1/2" (800 x 12.7) | 100 |
| 97156 | Tooth Belt | 33.1" x 1/2" (840 x 12.7) | 105 |
| 97157 $36.40 | Tooth Belt | 33.7" x 1/2" (856 x 12.7) | 106 |
| 97159 $29.52 | Tooth Belt | 34.7" x 1/2" (880 x 12.7) | 110 |
| 97164 $32.27 | Tooth Belt | 37/8" x 1/2" (960 x 12.7) | 120 |
| PART # | DESCRIPTION |
| 97110 $44.37 | Gilmer Drive Belt - 22.5" long |
| 97120 $44.37 | Gilmer Drive Belt - 24.0" long |
| 97130 $47.06 | Gilmer Drive Belt - 25.5" long |
| 97140 $47.06 | Gilmer Drive Belt - 27.0" long |
| 23528 $130.75 | Gilmer Drive Pump Pulley - 28-tooth. For Nos. 23600, 23610, 23620, 23630, 23660, 23670, and 23672. |
| 23532 $130.75 | Gilmer Drive Pump Pulley - 32-tooth |
| 97170 $107.93 | Gilmer Drive Crankshaft Pulley - 16-tooth. For Nos. 23600, 23610, 23620, 23630, 23660, 23670, and 23672. |
| 23520 $52.56 | V-Belt Crankshaft Pulley - 2.5” long |
| 23523 $72.81 | V-Belt Crankshaft Pulley - 4” long |