Moroso Products Alphabetical Index
| Moroso Performance Products - Catalog |
| Rear Axle Equipment, Sheetmetal & Body, Steering, Tires, Differential shims & Replacement parts, Spring perches, U-Bolts, rear end covers, U-Joint girdles, Filler cap kits, Rear Spoiler kit, Access Door, Hood Scoop plug, Floor pan Brace, Frame Connectors, Steering joints, Quick release Steering Hub & Adapter, Digital Durometer |
RPM - RON'S PRECISION MACHINE, INC.
69 E. 580 N.
Santaquin, Utah 84655
https://www.rpmrons.com
1-801-754-5338 or Toll free 1-866-700-5877
| Contact us anytime OR use your e-mail program and type in ron@rpmrons.com to send an e-mail with what you need |
| Engine Rebuild Kit and Parts Online Catalog. |
|
Hours: 9:00 AM to 5:00 PM Monday - Friday mountain time (Utah) Call toll free to purchase parts at: 1-866-700-5877 U.S. only |
Moroso Products Alphabetical Index
| Scroll down to see what you need then cick on the page link to the right of the table if there is one. |
| . | Page(s) |
| RACE SUPPORT & CONTINGENCY | 1 |
| PRODUCT INDEX for this page only | 2-7 |
| NEW PRODUCTS FOR 2017 | 8-29 |
| OIL PANS & ACCESSORIESSmall Block Chevrolet | 30-45 |
| OIL PANS & ACCESSORIES LS series |
|
| OIL PANS & ACCESSORIES LT series |
|
| OIL PANS & ACCESSORIES Big Block Chevy | 55-66 |
| OIL PANS & ACCESSORIES Chryler, Ford | 67-92 |
| OIL PANS & ACCESSORIES Oldsmoble | 93-101 |
| Oil Pan Accessories | 104-111 |
| OIL PUMPS | 112-133 |
| OILING SYSTEM | |
| VACUUM PUMPS & ACCESSORIES | |
| MOUNTING BRACKETS | |
| OIL PUMP & VACUUM PUMP DRIVE KIT & PULLEYS | |
| AIR/OIL SEPARATORS | |
| TANKS & COVERSALS | |
| TRANSMISSION PANS & ACCESSORIES | |
| CHEMICALS | |
| FASTENERS | |
| BRAKE & WHEEL EQUIPMENT | |
| TRICK SPRINGS | |
| TOOLS | |
| MOTOR & TRANSMISSION MOUNTS | |
| COOLING SYSTEM | |
| FUEL SYSTEM EQUIPMENT | |
| AIR CLEANERS & ACCESSORIES | |
| EXHAUST SYSTEM |
278-279 |
| VALVE TRAIN EQUIPMENT | |
| VALVE COVERS & Accessories | |
| IGNITION WIRE | |
| IGNITION SYSTEM | |
| ELECTRICAL SYSTEM | |
| REAR AXLE EQUIPMENT | |
| SHEETMETAL & BODY | |
| STEERING | |
| TIRES |
|
|
|
D Differentials & Rear Axle Accessories....................................... 360-361 |
|
|
|
F Frame Connectors............................... 363 Front Tires.......................................... 365 H Hood Scoop Plug.................................. 363 |
|
M Momentary Switch.......................... 356 |
|
|
|
R Rear Axle Equipment.................. 360-361 Rear End & Water Fill Cap Kits 309, 361 Rear End Covers................................. 360 |
|
ACCESSORIES FORD 9” DIFFERENTIAL SHIM & REPLACEMENT PARTS KITS • Kits include hard-to-find items needed to assemble Ford 9" center sections |
| PART # | DESCRIPTION |
| 84750 $68.66 | Drag Race Kit Contains: housing gasket; pinion shaft seal; nine pinion support shims consisting of one each .005", .006", .0075", .0082", two .004", and three .0105"; eight pinion pre-load shims for use with aftermarket aluminum pinion supports consisting of one each .005", .006", .0075", .0082", .009" and three .0105"; one pinion housing O-ring; and one 3/4" -20 Ford pinion nut |
| 84751 $79.53 | Oval Track Kit Contains: nine pinion retainer shims consisting of one each .005", .006", .0075",.0082", two .004", and three .0105"; twelve pinion pre-load shims consisting of one each .005", .006", .0075", .0082", .009", .020", .030", two .050" and three .010"; one pinion spacer .375" thick; and one 3/4" -20 Ford pinion nut |
|
REAR AXLE SPRING PERCHES, 2-1/2” WIDE Fits: Ford 9", Dana 60 and other 3" diameter axle housings |
| PART # | DESCRIPTION |
| 85090 $34.95 | Rear Axle Spring Perches, 2-1/2" Wide |
|
DANA 60 U-BOLTS • Moroso has an agreement with Dana Corporation to market hard-to-get replacement parts for the Dana 60, a popular rear axle in the Competition Eliminator and Super Stock classes |
| PART # | DESCRIPTION |
| 85080 $25.53 | U-Bolts, Dana 60, also Fits Ford 9" with 1350 series yoke |
| PART # | DESCRIPTION |
| 85330 $78.15 | Rear End Cover, Chevy 12-bolt, Chrome-Plated Steel |
|
U-JOINT GIRDLES • Unique design provides more bearing surface for the universal joint bearing cap, for increased strength • Manufactured from 7075-T6 aluminum with anodized finish • Comes complete with fasteners • One set per package |
| PART # | DESCRIPTION |
| 85800 $51.19 | Use with 1-1/6" dia. cap and 1.415" bolt centers, gold anodized Fits: 1955-82 Chevy with U-Bolts; Dana 60 with U-Bolts |
| 85810 $51.19 | Use with 1-1/6" dia. cap and 1.595" bolt centers, red anodized Fits: 1965-82 GM 12-Bolt with straps |
| 85820 $51.19 | Use with 1-1/8" dia. cap and 1.540" bolt centers, dark blue anodized Fits: Dana 60 with straps. Also fits Chrysler 8-3/4" ring gear with large yoke (Type 7290 driveshaft) |
| 85830 $79.62 | Use with 1-3/16" dia. cap and 1.668" bolt centers, black anodized Fits: 1350 Series race yokes including Mark Williams Ford 8.8, 9" Ford Series with 9" ring gear |
| 85850 $51.19 | Use with 1-1/16" dia. cap & 1.505" bolt centers, silver anodized Fits: Chrysler 8-3/4" ring gear w/ small yoke (Type 7260 driveshaft) |
| 85860 $51.19 | Use with 1-1/8" dia. cap and 1.575" bolt centers, light blue anodized Fits: Ford 9" |
|
FILLER CAP KIT, STEEL APPLICATIONS, UNIVERSAL • This kit comes with a 1-1/4" steel female bung that can be welded to steel; rear ends, tanks, valve covers, filler neck plates and other locations to replenish fluid or serve as an insection port • The included filler cap is knurled for easy grip removal and replacement • Filler cap is machined from 6061-T6 aluminum and includes an O-ring for leak free sealing |
| PART # | DESCRIPTION |
| 85280 $44.42 | Filler Cap Kit, Universal, Steel Bung, 1-1/4"-12UNF Threads, 1.5"O.D. |
|
FILLER CAP KITS, ALUMINUM APPLICATIONS, UNIVERSAL • These kits comes with an aluminum female bung that can be welded to aluminum, tanks, valve covers, filler neck plates and other locations to replenish fluid or serve as an insection port • Three kits are available, Knurled Filler Cap with 1.5" OD Female weld bung Contoured grip for easy removal and installation with either Moroso or Competition Engineering logo, 2.6" OD weld bung • Filler caps are machined from 6061-T6 aluminum and include an O-ring for leak free sealing |
| PART # | DESCRIPTION |
| 85282 $35.02 | Filler Cap Kit, Universal, Aluminum Bung, Black Anodized with Moroso logo 1-1/4"-12UNF Threads, 1.5"O.D. |
| 85284 $44.42 | Fill Cap Kit, Universal, Steel Bung ,Black Anodized with Moroso logo, 1-1/4"-12UNF Threads, 1.5" O.D. |
| 85283 $49.80 | Filler Cap Kit, Universal, Aluminum Bung, Black Anodized with Moroso logo, 1-3/8" -12UNF Threads, 2.6" O.D. |
| C9085 | Filler Cap Kit, Universal, Steel Bung, Black Anodized with Competition Engineering logo, 1-3/8" -12UNF Threads, 2.6" O.D. |
|
UNIVERSAL REAR SPOILER KIT • Provides downforce to rear wheels for improved high speed stability • Comes complete with support struts, mounting brackets, hardware and detailed instructions • Can be trimmed to fit most applications • Untrimmed dimensions: 57" length, 12" width and 24" struts • Made from .050" 3003-H 14 Aluminum sheet |
| PART # | DESCRIPTION |
| 78740 $431.80 | Universal Rear Spoiler Kit |
|
• .050" aluminum door is hinged to frame, providing
quick and easy access to fuel cells, dry sump tanks or any other
component • Comes with natural finish so customer can anodize or paint to match car color • Door held securely closed with self-ejecting, flush-head Dzus fastener • Includes all mounting hardware • 6" x 6" door, 8-1/8" x 8-1/8" overall |
| PART # | DESCRIPTION |
| 85700 $79.62 | Access Door |
|
HOOD SCOOP PLUG • Available for "Aero" series scoops • Specially formed to fit snugly without falling out • Bonding technology eliminates part separation • Open cell foam allows engine to breathe while idling, preventing airborne debris from entering hood scoop |
| PART # | DESCRIPTION |
| 99430 $38.97 | Hood Scoop Plug, fits 3-1/2" x 12-1/2" to 13-3/4" openings |
|
Bolt-On Design Fits: Camaro 2010-2015 • Like all high performance Pony Cars, 2010-'15 Camaros suffer from having a flexible chassis; which affects acceleration, handling,long term rattles and traction • The first step in fortifying a Camaro 2010-f15 chassis is to use this Floor Pan Brace, which replaces the factory stamped steel piece • Brace stiffens the floor pan and drive shaft tunnel area • Constructed out of 1-1/2" x 2-1/2" x .120 wall rectangular tubing • Easy to install bolt-on design that uses the existingmounting points • Use with optional Part no. 78010, Frame Connectors for the ultimate in tying the front and rear subframes together and triangulating the chassis side to side • Durable gloss, black powder coat finish |
| PART # | DESCRIPTION |
| 78000 | Floor Pan Brace, Bolt-on, for Camaro, 2010-2015 |
|
Bolt-On Design Fits: Camaro 2010-2015 • Like all high performance Pony Cars, 2010-f15 Camaros suffer from having a flexible chassis; which affects acceleration, handling, long term rattles and traction • These are true subframe connectors that form a solid foundation for better horsepower transfer and handling • This design ties the independent rear suspension into the body of the car, while still allowing it to work like it was designed to • Race-proven, improved 60 foot times • Constructed out of 2-1/2" x 1-1/2" x .120 wall rectangular tubing • Easy to install bolt-on design that uses the existing floor pan and subframe mounting points • Once installed, you will immediately notice diminished chassis shake, improved handling and reduced wheel hop • Use with optional Part no. 78000, Floor Pan Brace (see above) to tie the front and rear subframes together and triangulate the chassis side to side • Legal for all classes of Drag Racing • Durable gloss, black powder coat finish |
| PART # | DESCRIPTION |
| 78010 | Frame Connectors, Bolt-on for Camaro 2010-2015 |
|
STEERING JOINTS, DRAG RACE • Available in splined & unsplined configurations to fit a variety of steering shafts • Drag Race Applications only |
| PART # | DESCRIPTION |
| 80110 $130.83 | Steering Universal Joint Unsplined. Fits: steering columns with 3/4" O.D. shafts, 1-1/4" O.D. |
| 80120 $130.83 | Steering Universal Joint Unsplined. Fits: steering columns with 5/8" O.D. shafts, 1-1/4" O.D. |
| 80130 | Steering Universal Joint Unsplined. Specially designed to adapt Pinto rack & pinion manual steering box to 5/8" O.D. steering shafts, 1-1/4" O.D. with 9/16" -26 spline |
| 80131 $151.01 | Steering Universal Joint, 3/4-36 spline to 3/4" O.D. shafts, 1-1/4" O.D. Fits: Ford power rack and GM manual, 1976 and up |
|
SFI APPROVED QUICK RELEASE STEERING WHEEL HUB AND ADAPTER • Meets NHRA, IHRA, SCCA, NASA and other sanctioning body criteria for SFI (Safety Foundation Inc.) requirement #42.1 concerning steering wheel attachment and release • Hub manufactured from lightweight billet aluminum with anodized finish • 5/16" -18 threaded bolt holes for mounting • Spring loaded quick release pin is integral with the hub and features a large diameter engagement surface for use with bulky racing gloves • Includes steering shaft adapter manufactured from 1018 steel for extra strength and ease of welding |
| PART # | DESCRIPTION |
| 80160 $134.89 | SFI Approved Quick Release Steering Wheel Hub and Adapter. Fits: 3/4" O.D. steering shafts and steering wheels with a 3 hole, 1-3/4" diameter bolt pattern |
|
FIVE HOLE STEERING WHEEL ADAPTER • Allows racers to continue to use Moroso’s Quick Release Steering Wheel Hub No. 80160, or similar aftermarket hubs with 3 hole bolt pattern when converting to steering wheels with a 5 hole bolt pattern • Billet aluminum adapter includes all mounting hardware (steering wheel to adapter and adapter to hub) |
| PART # | DESCRIPTION |
| C5078 $72.43 | Five Hole Steering Wheel Adapter |
|
DS-2™ FRONT TIRES • Aircraft inspired tread design offers reduced weight, minimal rolling resistance and high-speed stability • Asymmetrical tread pattern improves high-speed stability by reducing the tire’s tendency to "walk" at the top end • 4-ply nylon construction with high-strength bead provides added durability, especially during mounting and dismounting • Ozone-resistant tire compound withstands the harmful effects of the sun and other environmental conditions • Tested to 225 MPH with 1,000 lb. load • Bias ply style tires |
| Pagt # |
Size Inches |
Approx. Weight |
Dia. |
Thread Width |
Recom- mended Rim Width |
Oper- ating Pres- sure |
Section Width |
Circum- frence |
| 17023 $275.39 | 23.0 x 5.0 x 15 | 11 lbs. | 23" | 5" |
3-1/2"- 6-1/2" |
30 psi. | 6.2" on 5" Rim |
72- 7/16" |
| 17040 $275.39 | 24.0 x 5.0 x 15 | 11 lbs. | 24" | 5" |
3-1/2"- 6-1/2" |
30 psi. | 6.8" on 5" Rim |
76- 7/16" |
| 17025 $275.39 |
25.0 x 4.5 x 15 |
12 lbs. | 25" | 4.5" |
3-1/2"- 5" |
30 psi. |
6.4" on 5" Rim |
78- 1/4" |
| 17026 $291.52 |
26.0 x 4.5 x 15 |
12 lbs. | 26" | 4.5" | 3-1/2"- 5" | 30 psi. |
7.1" on 5" Rim |
81" |
| 17028 $275.39 |
28.0 x 4.5 x 15 |
13 lbs. | 28" | 4.5" | 3-1/2"- 5" | 30 psi. |
7.7" on 5" Rim |
86- 3/8" |
| 17029 $317.18 |
26.2 x 5 x 17 |
13.5 lbs. | 26.2" | 5" | 4-1/2"- 5-1/2" | 30 psi. |
6.12" on 4-1/2" Rim |
82- 5/16" |
|
• Tubeless construction and 2-ply nylon cord helps to reduce
unsprung weight • High cord angle and unique tread design reduce rolling resistance for increased speeds • Shallow tread depth increases stability at high speeds • Stronger mounting bead withstands higher pressures when adjusting for roll-out • Bias ply style tires |
| Pagt # |
Size Inches |
Approx. Weight |
Dia. |
Thread Width |
Recom- mended Rim Width |
Oper- ating Pres- sure |
Section Width |
Circum- frence |
| 17050 $275.39 | 5.50 x 15 | 10 lbs. |
25- 1/4" |
3-1/2" | 3-1/2"- 4" | 30-35 psi. |
5.7" on 4" Rim |
78" |
| 17100 $307.67 | 7.10 x 15 | 11 lbs. | 27- 3/4" | 4-1/8" | 3-1/2"- 5" | 30-35 psi. |
7.4" on 5" Rim |
87- 3/4" |
| 17600 $307.67 | 7.60 x 15 | 13 lbs. | 29- 1/4" | 4-5/8" | 3-1/2"- 5" | 30-35 psi. |
8.0" on 5" Rim |
90- 3/4" |
|
TIRE COVERS • Moroso Tire Covers keep tire pressures consistent by blocking hot rays • Made from a rugged 6 mil vinyl reflecting outer surface laminated to an insulating backing of polyscrim • Completely washable and available in two different styles • No. 99410 $70.15 fits right over the tire and is held securely in place by a 4"rear flap • No. 99421 $60.74 uses suction cups and hangs like a curtain against the body |
| PART # | DESCRIPTION |
| 99410 $70.15 | Tire Cover, fits over tires up to 33.5" x 17.5" x 15" |
| 99421 $60.74 | Tire Cover, universal design with suction cups, 42" x 36" |
|
In racing where thousandth of a second can count, a durometer
is used to check on; whether a tire has gotten too hard as it
has aged, compare different tires hardness and softness against
each other or how a tire responded to a chemical tire softener. • Calibrated on a Shore type A scale, the scale used to measure the hardness of race and ultra high performance tires. • Easy to read Digital readout with 1/2" tall numbers • Reads to .5 • Has a hold button to capture the reading on the readout • Comes with a foam lined plastic case for storage of the unit when not in use |
| PART # | DESCRIPTION |
| 89585 $134.88 | Digital Durometer with Case |
|
NHRA TIRE CONTINGENCY RULE NHRA’s contingency rule for the Professional Categories states that the "vehicle must be equipped with all four tires bearing the same tire manufacturer’s brand name" to be eligible for contingency awards. Please note that this rule applies only to the Pro classes. All other classes can use Moroso DS-2™ or Drag Special Front Tires and still be eligible for tire contingencies posted by any rear tire manufacturer. |