| Moroso Performance Products - Catalog |
| Epoxy, ABS pump cover, Air oil separators, All weather seal, Plug kits, Assembly lube, Expansion tanks, Oil coolers, Block filler, Balancer bolts, Cyliner head bolt washers, Flywheel & flexplage bolts, Bolts, Brackets, Covers, Stud kits, Cam stop Buttons,Tanks, Chemicals, Pins, Pipe plugs, Dowels, Dipstick parts, Dry Sump Tanks, Grommets, Moly paste, Pilot bearings, /raduatir oartsm Supercharger Tanks, Trans. Coolers, Transmission Pan & Accessories, & Other Parts |
RPM - RON'S PRECISION MACHINE, INC.
69 E. 580 N.
Santaquin, Utah 84655
https://www.rpmrons.com
1-801-754-5338 or Toll free 1-866-700-5877
| Contact us anytime OR use your e-mail program and type in ron@rpmrons.com to send an e-mail with what you need |
| Engine Rebuild Kit and Parts Online Catalog. |
|
Hours: 9:00 AM to 5:00 PM Monday - Friday mountain time (Utah) Call toll free to purchase parts at: 1-866-700-5877 U.S. only |
| Moroso Products Alphabetical Index |
| . | Page(s) |
| RACE SUPPORT & CONTINGENCY | 1 |
| PRODUCT INDEX for this page | 2-7 |
| NEW PRODUCTS FOR 2017 | 8-29 |
| OIL PANS & ACCESSORIES Small Block Chevrolet | 30-45 |
| OIL PANS & ACCESSORIES LS series |
|
| OIL PANS & ACCESSORIES LT series |
|
| OIL PANS & ACCESSORIES Big Block Chevy | 55-66 |
| OIL PANS & ACCESSORIES Chryler, Ford | 67-92 |
| OIL PANS & ACCESSORIES Oldsmoble | 93-101 |
| Oil Pan Accessories | 104-111 |
| OIL PUMPS | 112-133 |
| OILING SYSTEM | |
| VACUUM PUMPS & ACCESSORIES | |
| MOUNTING BRACKETS | |
| OIL PUMP & VACUUM PUMP DRIVE KIT & PULLEYS | |
| AIR/OIL SEPARATORS | |
| TANKS & COVERSALS | |
| TRANSMISSION PANS & ACCESSORIES | |
| CHEMICALS | |
| FASTENERS | |
| BRAKE & WHEEL EQUIPMENT | |
| TRICK SPRINGS | |
| TOOLS | |
| MOTOR & TRANSMISSION MOUNTS | |
| COOLING SYSTEM | |
| FUEL SYSTEM EQUIPMENT | |
| AIR CLEANERS & ACCESSORIES | |
| EXHAUST SYSTEM | |
| VALVETRAIN EQUIPMENT | |
| VALVE COVERS & Accessories | |
| IGNITION WIRE |
310-332 |
| IGNITION SYSTEM |
333-347 |
| ELECTRICAL SYSTEM |
348-359 |
| REAR AXLE EQUIPMENT |
360-361 |
| SHEETMETAL & BODY |
362-363 |
| STEERING |
364 |
| TIRES |
365-366 |
| APPAREL |
367-368 |
|
|
|
F (con’t) Flywheel/Flex Plate Bolts.................. 214 Fuse Box Cover.......................... 192-200 G Gasket, Transmission Pan.................. 203 Gear Lube, Climbing............................ 206 Grommets, Firewall.............................. 214 H Header Bolts....................................... 213 Hood Pins................................ 22, 214-215 |
|
I Intake Manifold Bolt Kits............. 213 Intercooler Tanks................... 192-200 M Moly Paste™.................................. 206 |
|
|
|
M (con’t) Mounting Bracket, Dry Sump Tanks................. 185 Mounting Brackets, Universal Tank................. 189 O Offset Air Cleaners 274 Offset Cylinder Head Dowels........................... 208 Oil/Air Separator Tanks.......................... 17, 179-183 Oil Coolers, Automatic Transmission.............. 205 Oil Pan Stud & Bolt Kits.................. 22, 210-213 Oil Pan Stud Kits, Ford.................................. 210 Oil Pan Stud Kits, Import............................... 211 |
|
|
|
Q Quick Fasteners/Accessories.. 20-22, 216-219 Quick Fastener Sinking Tool...... 219, 236 Quick Fastener Transfer Stud Punch Kits.......................... 219, 236 Quick Fastener Wrenches......... 219, 237 Quick Release Pins........................... 220 R Race Write.......................................... 207 Radiator Cap Covers.......................... 192 Radiator Overflow Tanks............ 190-200 Radiator Recovery Tanks........... 190-200 Roller Pilot Bearing............................. 204 S Sealers............................................... 207 Self-Ejecting Fasteners..................... 217 Separators, Air-Oil............... 17, 179-183 |
|
S (con’t) Springs, Fastener.................................. 217 Stud Kits.................................. 22, 210-213 Stud Kits, Ford..................................... 210 Stud Kits, Import................................. 211 Supercharger Tanks....................... 192-199 T Tanks............................ 16, 18-19, 184-200 Tanks, Air/Oil Separators........... 17, 179-183 Tank Mounting Brackets..................... 189 |
|
• Designed to be plumbed between the valve cover and the
inlet side of the vacuum pump • Features -12aN inlets and outlets and has a -6aN drain • Dimensions: 3-1/8" dia., 6-3/4" overall height |
| PART # | DESCRIPTION |
| 85471 $180.78 * | Air-oil Separator Tank |
|
• Moroso Vacuum pump air-oil Separator is designed to be
plumbed between the valve cover and the inlet side of the vacuum
pump • Features internal baffling with mesh media for superior separation of air and oil • Billet aluminum body compliments any engine compartment and can be polished, chromed or powder coated for a custom look • -12 aN inlet and outlet fittings for plumbing the air-oil Separator inline • Includes a billet aluminum mounting clamp for the body of the air-oil separator, a stainless steel bracket for non-accessible behind the panel mount applications and an o-ringed drain bung |
| PART # | DESCRIPTION |
| 85495 $241.53 | Air-oil Separator, universal, -12 AN fittings |
|
. Plumbed into a vehiclefs pCV system to capture the excess
crankcase vapors and the residual oil mist from re-entering the
intake track . Vehicles from the factory vent these excess crankcase vapors and residual oil right back into the intake manifold which could cause detonation and oil deposits to form in the intake track including the valves themselves . Polished Billet aluminum body compliments any engine compartment and can be chromed or powder coated for a custom look . Includes 3/8" 90‹ inlet & outlet fittings, 36" of 3/8" rubber hose for plumbing the air-oil Separator inline, and a billet aluminum mounting clamp for the body of the Separator . Features a bottom drain with elbow that makes draining the collected oil virtually mess-free |
| PART # | DESCRIPTION |
| 85474 $240.14 | Air-oil Separator, universal fit |
| PART # | REPLACEMENT PART |
| 97200 $25.53 | Ball Valve, 3/8" Male and female ports |
|
• Moroso air-oil Separator is plumbed into a vehicle’s
pCV system and captures the excess crankcase vapors and the residual
oil mist from re-entering the intake tract • Vehicles from the factory vent these excess crankcase vapors and residual oil right back into the intake manifold which could cause detonation and oil deposits to form in the intake tract including the valves themselves • Ethanol enriched fuels put off more moisture during the combustion process, the Moroso air-oil Separator is an excellent tool for collecting this extra moisture • Billet aluminum body is available either with raw or black anodized finish • 4.5" tall by 3.75" (clamp installed) diameter body, fits in more places than our standard air-oil separators • Supplied 3/8", 90° inlet & outlet fittings, 36" of 3/8" rubber hose and includes a billet aluminum mounting clamp • Two piece body of the air-oil Separator unscrews for cleaning and draining |
| PART # | DESCRIPTION |
| 85682 $284.66 | Airr-oil Separator, Small Body,universal, Clear Bottom |
| 85683 $294.19 | Air-oil Separator, Small Body,universal, Black anodized finish upper, Clear Bottom |
| 85496 $206.50 | Air-oil Separator, Small Body, raw finish |
| 85497 $218.55 | Air-oil Separator, Small Body, Black anodized finish |
| PART # | REPLACEMENT PART |
| 97301 $118.65 | Air/oil Separator Small Body replacement Clear Bottom |
|
AIR-OIL SEPARATOR PCV DELETE KITFOR SUBARU From the factory, a vehicle’s PCV system vents excess crankcase vapors, residual oil and moisture back into the intake manifold which compromises performance and durability |
|
• Kit allows air/Separators to work at greater efficiency
at all rpm levels • Enables full filtration of Blow By gases entering turbo inlet • Kit is designed to work with all Moroso air/oil Separators for Subaru applications • Deletes o.e.M. pCV System including intake Manifold pCV inlet • Not for use on emission Controlled Vehicles, off road use only |
| PART # | DESCRIPTION |
| 85699 $118.62 | Air/oil Separator PCV delete for Subaru |
|
• A replacement clear bottom for Moroso nos. 85682 $284.66
or 85683 $294.19 and is an option if someone wants to change
out their standard billet aluminum bottom on a Moroso Small Bodied
kit •Allows the user to see how much oil is collected without unscrewing the bottom of a Moroso small body air/oil Separator |
| PART # | REPLACEMENT PART |
| 97301 $118.65 | Air/oil Separator Small Body replacement Clear Bottom |
|
• Plumbed into a vehicle's pCV system to capture the excess
crankcase vapors, residual oil mist and moisture from re-entering
the intake tract • Vehicles from the factory vent these excess crankcase vapors, residual oil mist and moisture right back into the intake manifold which could cause: detonation, oil deposits in the intake tract including the valves themselves, and decreased intercooler efficiency • Increases engine performance from cleaner intake air • Air-oil Separators have billet aluminum bodies with internal baffling and mesh media • Includes heavy duty brass inlet and outlet fittings, fuel/emission/pCV Vapor hose, stainless steel mounting bracket and billet aluminum mounting clamp for the body of the separator • Some vehicle crankcase ventilation systems require that 2 air-oil Separator bodies be used to properly capture and ventilate the system |
| Moroso Air-Oil Separators are available in 2 sizes, not all kits are available with both size body, please see Air-Oil Separator Application Chart on the next page for more information |
|
• The original size, 43% more capacity than the Small Body
version • features a bottom drain with elbow that makes draining the collected oil virtually mess-free • polished body can be chromed, painted or powdered coated for a custom look |
|
• Smaller size fits in more applications and some customers
prefer the smaller size body • Two piece body unscrews for draining • available with a polished or black anodized finish |
| PART # | REPLACEMENT PARTS |
| 97300 $3.12 | Replacement Cap, air-oil Separator large Body drain, Black |
| 97301 $118.65 | Air/oil Separator Small Body replacement Clear Bottom |
| 65388 $9.33 | Air/oil Sep, 3/8" To 1/2" hose 90 deg., Black |
| 65389 $10.22 | Air/oil Sep, 3/8" To 1/2" hose, Straight, Black |
| 65131 $25.58 | Air/oil Sep, 3/8" To 1/2" hose, 90 deg. Streamline, Black |
| 65381 $8.78 | Air/oil Sep, 3/8" To 3/8" hose, Straight, Black |
| 65382 $10.25 | Air/oil Sep, 3/8" To 3/8" hose, 90 deg., Black |
| FITS: | # of Air-Oil Separ- ators in Kit |
Large Body Part # |
Polished Small Body Part # |
Black Anodized Small Body Part # |
| BMW M3, 1995-1999 | 1 | 85499 $283.45 | 85648 $263.09 | 85649 $263.09 |
| Cadillac CTS V, 2008-2014 | 1 | N/a | 85602 $214.58 | 85603 $226.61 |
| Chevy Camaro SS, 2010-2015, Zl1, 2012-2015 | 1 | 85487 $253.69 | 85652 $233.36 | 85653 $234.85 |
| Chevy Camaro s/ Edelbrock Super Charger, 2010-2015 | 1 | 85493 $259.08 | 85634 $221.29 | 85635 $226.61 |
| *Chevy Corvette Non ZO6 2014-2017 | 1 | 85524 $257.80 | 85686 $218.58 | 85687 $229.41 |
| Chevy Corvette Zo6 2006-2013 | 1 | 85521 $257.80 | 85678 $218.58 | 85679 $229.41 |
| Chevy Corvette, 1997-2004 | 1 | 85516 $249.74 | N/A | N/A |
| Chevy Corvette LT1/LT4, 1992-1996 | 1 | N/a | 85642 $250.94 | 85643 $263.09 |
| Chevy/GM Truck, 1999-2013 | 1 | 85481 $241.53 | N/a | N/a |
| Chrysler 300C 6.1, 2005-2010 | 1 | 85472 $241.53 | 85612 $206.50 | 85613 $218.55 |
|
ChrySler 300C 5.7 w/ after market intake, 2005-2010 |
1 | 85472 $241.53 | 85640 $209.12 | 85641 $218.55 |
|
ChrySler 300C 5.7 with factory intake, 2005-2010 |
1 | N/a | 85632 $209.12 | 85633 $218.55 |
| Dodge Challenger 6.1/6.4 nln Hellcat, non Shaker Hood 2008-2017 | 1 | 85472 $241.53 | 85612 $206.50 | 85613 $218.55 |
|
Dodge Challenger 5.7 w/ after market intake, 2008-2012 |
1 | 85472 $241.53 | 85640 $209.12 | 85641 $218.55 |
|
Dodge Challenger 5.7 w. factory intake, 2008-2012 |
1 | N/a | 85632 $209.12 | 85633 $218.55 |
| Dodge Charger 6.1/6.4 non Hellcat, 2008-2015 | 1 | 85472 $241.53 | 85612 $206.50 | 85613 $218.55 |
| Dodge Charger 5.7 w/ after market intake, 2006-2010 | 1 | 85472 $241.53 | 85640 $209.12 | 85641 $218.55 |
|
Dodge Charger 5.7 w. factory intake, 2006-2010 |
1 | N/a | 85632 $209.12 | 85633 $218.55 |
| Dodge Magnum 6.1, 2005-2008 | 1 | 85472 $241.53 | 85612 $206.50 | 85613 $218.55 |
|
Dodge Magnum 5.7 w/ after market intake, 2005-2008 |
1 | 85472 $241.53 | 85640 $209.12 | 85641 $218.55 |
|
Dodge Magnum 5.7 w. factory intake, 2005-2008 |
1 | N/a | 85632 $209.12 | 85633 $218.55 |
| Dodge Ram TruCk 1500 5.7, 2009-2014 | 1 | 85479 $245.62 | N/a | N/a |
| Ford Focus ST, 2013-2017 | 1 | N/A | 85664 $242.93 | 85665 $257.80 |
| FITS: | # of Air-Oil Separ- ators in Kit |
Large Body Part # |
Polished Small Body Part # |
Black Anodized Small Body Part # |
| Ford Mustang GT, 2015-2017 | 1 | 85522 $249.74 | 85680 $218.58 | 85681 $229.41 |
| Ford Mustang GT, 2011-2014 | 1 | 85485 $241.53 | 85628 $218.58 | 85629 $229.41 |
| Ford Mustang GT WiTh rouSh SuperCharger, 2011-2014 | 1 | 85491 $241.53 | 85604 $214.58 | 85605 $226.61 |
| Ford Mustang Shelby GT 500, 2007-2014 | 1 | 85478 $241.53 | 85616 $218.58 | 85617 $229.41 |
| Ford Mustang V-6, 2011-2014 | 1 | 85498 $241.53 | 85638 $206.50 | 85639 $218.55 |
| Ford Mustang GT, 2005-2010 | 1 | 85477 $241.53 | N/a | N/a |
| Ford Mustang GT, 1996-2004 | 1 | 85486 $241.53 | N/a | N/a |
| Ford Mustang GT/lX 5.0, 1987-1993 | 1 | 85514 $236.17 | 85660 $221.21 | 85661 $229.41 |
| *Ford Mustand Ecoboost 2015-2017 | 1 | 85523 $259.08 | 85684 $234.72 | 85685 $240.18 |
| Ford Mustand Ecoboost 2011-14 | 1 | 85520 $257.80 | 85676 $218.58 | 85677 $229.41 |
| Ford F-150, 5.4, 2004-2008 | 1 | 85513 $257.74 | N/a | N/a |
| Ford Raptor Truck 6.2, 2010-2014 | 1 | 85492 $249.68 | 85606 $252.30 | 85607 $263.17 |
| Hummer H2, 2003-2009 | 1 | 85481 $241.53 | N/a | N/a |
| Jeep JK, 3.6, 2012-2017 | 1 | 85518 $242.88 | 85670 $221.28 | 85671 $226.61 |
| Jeep JK, 3.8, 2007-2011 | 1 | 85517 $241.47 | 85668 $214.58 | 85669 $226.61 |
| Jeep SRT8, 2006-2010 | 1 | 85482 $241.53 | N/a | N/a |
| Lotus Elise/Exige, 2005-2011 | 2 | 85494 $533.10 | 85636 $476.48 | 85637 $488.52 |
| Mazda Miata, 1990-2005 | 1 | 85488 $234.74 | 85600 $206.50 | 85601 $218.55 |
| Mini Cooper S/Clubman S, 2007-2015 | 1 | N/a | 85608 $237.41 | 85609 $248.29 |
| Mitsubishi EVO 10, 2008-2015 | 1 | 85483 $244.19 | N/a | N/a |
| Subaru BRZ, Scion FRS, 2012-2015 | 1 | 85515 $249.74 | 85666 $211.82 | 85667 $218.58 |
| SuBaru STi, 2008-2014, Top MouNT Intecooler | 2 | 85510 $512.93 | 85644 $462.93 | 85645 $473.80 |
| SuBaru STi, 2008-2014, front mount intercooler | 2 | N/a | 85646 $462.93 | 85647 $473.80 |
| Subaru WRX, 2008-2014 | 2 | 85489 $512.93 | 85610 $462.93 | 85611 $473.80 |
| Subaru WRX, 2006-2007, STi, 2004-2007 Top Mount Intercooler | 2 | 85484 $512.93 | 85626 $473.80 | 85627 $483.14 |
| Subaru WRX, 2006-2007, STi, 2004-2007 front mount Intercooler | 2 | N/a | 85654 $462.93 | 85655 $473.80 |
| Subaru WRX, 2015-up | 1 | N/a | 85672 $218.58 | 85673 $229.41 |
| Toyota Tundra, 2007-2014, 5.7 & Toyota Sequoia, 2008-2014 | 1 | 85511 $259.08 | 85650 $223.91 | 85651 $226.61 |
| Volkswagen Golf/Jetta, 2.0 T, 2010-2014 | 1 | 85519 $257.80 | 85674 $225.30 | 85675 $229.41 |
| Universal | 1 | 85474 $240.14 | 85496 $206.50 | 85497 $218.55 |
| Universal, -12AN | 1 | 85495 $241.53 | N/a | N/a |
|
DRY SUMP TANKS • Tall design capacity: 6 quarts; short design capacity: 5 quarts • Oil tanks without integral breathers and #12 breather fitting use Nos. 85465, 85466, or 85467, Overflow Breather Tanks • Large diameter, billet aluminum, screw-on cap with O-ring • Body height: 13" Tank measures 11.1"; 15" Tank measures 12.9" • Use Moroso Mount Nos. 22674, 22677, 22678, and 22679. |
| PART # | Description |
| 22681 $768.10 * | Dry Sump Tank, 13", 5 Quart, (1) -16AN. Oil tanks without integral breathers and #12 breather fitting use Nos. 85465, or 85466, Overflow Breather Tanks |
| 22686 $768.10 * | Dry Sump Tank, 15", 6 Quart, (1) -16AN. Oil tanks without integral breathers and #12 breather fitting use Nos. 85465, or 85466, Overflow Breather Tanks |
| PART # | Description |
| 22682 $905.65 * | Dry Sump Tank, 13", 5 Quart, (1) -16AN with Integral Breather Tank |
| 22687 $905.65 * | Dry Sump Tank, 15", 6 Quart, (1) -16AN with Integral Breather Tank 5466, Overflow Breather Tanks |
| PART # | Description |
| 22683 $785.66 * | Dry Sump Tank, 13", 5 Quart, (3) -12AN. Oil tanks without integral breathers and #12 breather fitting use Nos. 85465, or 85466, Overflow Breather Tanks |
| 22688 $785.66 * | Dry Sump Tank, 15", 6 Quart, (3) -12AN. Oil tanks without integral breathers and #12 breather fitting use Nos. 85465, or 85466, Overflow Breather Tanks |
| PART # | Description |
| 22684 $923.27 * | Dry Sump Tank, 13", 5 Quart, (3) -12AN with Integral Breather Tank |
| 22689 $923.27 * | Dry Sump Tank, 15", 6 Quart, (3) -12AN with Integral Breather Tank |
| PART # | Available Options |
| 22674 $159.18 | Dry Sump Tank Mount, 7" Diameter |
| 22677 $164.61 | Straight Extended Tank Mount, 7" Diameter |
| 22678 $164.61 | 30º Angle Extended Tank Mount, 7" Diameter |
| 22679 $138.94 | U-Weld-It Tank Mount, 7" Diameter |
| PART # | Replacement Parts |
| 68815 $22.86 | Non-Hooded Breather |
| 97571 $45.83 | Replacement lid with O-ring |
| 97751 $11.95 | Replacement O-ring |
|
• Tank body is 20" tall and 6" diameter with a
six quart capacity • -16AN inlet and -12AN outlet • -12AN Breather tank fitting • O-ring drain bung • Tank comes apart for ease of cleaning or inspection • Top of tank can be clocked for plumbing routing • Top and bottom of tank are joined together by billet aluminum O-ringed sealing flanges • Large diameter, billet aluminum, screw-on cap with O-ring for positive sealing |
| PART # | DESCRIPTION |
| 22691 $677.51 * | Dragster 6 Quart, Two-Piece Dry Sump Tank |
| PART # | REPLACEMENT PARTS |
| 97571 $45.83 | Replacement lid with O-ring |
| 97751 $11.95 | Replacement O-ring |
| Moroso offers aluminum Dry Sump Tank Mount Kits for all 7" diameter Moroso tanks. The kits include a .250" thick billet aluminum mounting flange to mount to any motor plate application. The rounded aluminum saddle ensures proper contact to the tank and along with the rubber strips, vibration is reduced to a minimum. The stainless steel clamps are sanctioning body legal, and will hold the tank securely to the mount |
| PART # | DESCRIPTION |
| 22677 $164.61 | Straight Straight extended Tank Mount. Mount is 5.25" from flange mount to saddle base |
| 22678 $164.61 | 30° Angle 30 Degree extended Tank Mount. Mount is 5.25" from flange mount to saddle base |
| 22679 $138.94 | U-Weld-It Tank Mount. Maximum mount length is 5.25" from flange mount to saddle base |
|
• Fits 7" diameter Dry Sump Tanks • Billet aluminum base for strength • Includes stainless steel band clamp with interlocking rubber for cushioning • Two per package |
| PART # | DESCRIPTION |
| 22674 $159.18 | Dry Sump Tank Mount, 7" diameter |
|
• Provides maximum protection against dirt and airborne
debris without restricting air flow • Clamp on type, includes clamps (one per pack) • Fits 2" O.D. tubes: is a replacement breather for Moroso Breather Tanks, Part Nos. 85400, 85402, 85404, & 85406. • Cleanable and re-usable: oil before use |
| PART # | DESCRIPTION |
| 68818 $22.79 * | Filtered Breather, non-hooded style, clamp-on type. For Moroso Breather Tanks, 2" O.D. |
| PART # | DESCRIPTION |
| 85400 $82.15 * | Breather Tank, -12AN Fitting |
| 85402 $67.35 * | Breather Tank, -10AN Fitting |
| 85404 $63.30 * | Breather Tank, -8AN Fitting |
| 85406 $56.65 * | Breather Tank, -6AN Fitting |
| PART # | REPLACEMENT PARTS |
| 97200 $25.53 | Ball Valve, 3/8" Male and Female Ports |
| 68818 $22.79 | Non-Hooded Breather |
|
Vacuum Pumps & Dry Sump Tanks • Remote breather tank is a perfect companion for Moroso’s Racing Vacuum Pumps or Dry Sump Tanks • Includes non-hooded, clamp-on style Filtered Breather that traps oil while allowing air to escape freely • Petcock facilitates tank draining • Dimensions: 3-1/8" diameter, 6-1/2" tank height (without filter), 11-1/2" overall height |
| PART # | DESCRIPTION |
| 85465 $136.17 * | Breather Tank, -12AN fitting, male |
| 85470 $132.12 * | Breather Tank, 3/8" NPT fitting,female |
| 85456 $136.17 * | Breather Tank, -6AN fitting, male |
| 85458 $136.17 * | Breather Tank, -8AN fitting, male |
| 85459 $136.17 * | Breather Tank, -10AN fitting, male |
| 85475 $148.37 * | Breather Tank, -16AN fitting, male |
| PART # | REPLACEMENT PARTS |
| 68815 $22.86 | Non-Hooded Breather |
| 68811 $25.53 | Half-Hooded Breather |
| 97200 $25.53 | Ball Valve, 3/8" Male and Female Ports |
|
Superior air/oil separation performance for all engines • A perfect companion for engines equipped with dry sump pumps, vacuum pumps or non-dry sump or non-vacuum pump equipped engines that historically have “pushed oil” with other breather tanks • Features internal baffling with mesh media for superior separation of air and oil • -12AN male side fitting and petcock facilitates tank draining • Includes a panel mount, billet aluminum clamp that has two supplied 1/4" -20 mounting hardware • Dimensions: 3-1/8" dia., 6-1/2" tank height (without filter), 11-1/2" overall height |
| PART # | DESCRIPTION |
| 85467 $175.45 * | Breather Tank |
| PART # | REPLACEMENT PARTS |
| 63403 $70.13 | Billet Aluminum Mounting Bracket, Universal |
| 68815 $22.86 | Non-Hooded Breather |
| 68811 $25.53 | Half-Hooded Breather |
| 97200 $25.53 | Ball Valve, 3/8" Male and Female Ports |
|
Dry Sump, Vacuum Pump Systems, Misc. • All billet aluminum, lightweight tank features mounting strap to simplify installation • Includes non-hooded, clamp-on-style Filtered Breather that traps oil while allowing air to escape freely • Petcock facilitates tank draining • Dimensions: 3" dia., 6-1/2" tank height (without filter), 11-1/2" overall height |
| PART # | DESCRIPTION |
| 85500 $205.01 * | Billet Breather Tank |
| PART # | REPLACEMENT PARTS |
| 68815 $22.86 | Non-Hooded Breather |
| 68811 $25.53 | Half-Hooded Breather |
| 97200 $25.53 | Ball Valve, 3/8" Male and Female Ports |
|
BREATHER TANKS, MULTI-INLET . Multi-inlet tank can collect from different sources to save on weight and plumbing complexity . All aluminum, lightweight tank features mounting straps to simplify installation . Includes non-hooded, clamp-on style Filtered Breather that traps oil while allowing air to escape freely . Petcock facilitates tank draining . Dimensions: 3-1/8" diameter, 6-1/2" tank height (without filter), 11-1/2" overall height |
| PART # | DESCRIPTION |
| 85469 $153.70 | Breather Tank, Two -12AN fitting, males 180‹ apart |
| 85468 $153.70 | Breather Tank, Two -10AN fittings |
| 85473 $145.72 * | Dry Sump Breather Tank, Two 3/8" NPT female bungs, 180‹ apart |
| PART # | REPLACEMENT PARTS |
| 68815 $22.86 | Non-Hooded Breather |
| 68811 $25.53 | Half-Hooded Breather |
| 97200 $25.53 | Ball Valve, 3/8" Male and Female Ports |
|
Vacuum/Dry Sump Pump etc. . Eliminates the need for two tanks . Larger capacity 2.5 quart tank complete with dual -12AN fittings, allows hookup from Vacuum Pump and Dry Sump Pump . All-aluminum, lightweight 3" x 17-1/2" (installed) tank includes mounting clamp to simplify installation . Includes non-hooded, clamp-on-style Filtered Breather that traps oil while allowing air to escape freely . Petcock facilitates tank draining |
| PART # | DESCRIPTION |
| 85466 $164.63 * | Breather Tank, Vacuum/Dry Sump Pump, 2.5 Quart |
| PART # | REPLACEMENT PARTS |
| 63401 $13.30 | Universal Tank Mounting Bracket, 3" to 3.25" dia. |
| 68815 $22.86 | Non-Hooded Breather |
| 68811 $25.53 | Half-Hooded Breather |
| 97200 $25.53 | Ball Valve, 3/8" Male and Female Ports |
|
• Provides remote filling capabilities and breathing capacity • Mounted so that its bottom outlet, with 3/4" NPT female fitting, is higher than the inlet to the steering pump, rear axle housing, etc. • The 3/8" NPT fitting located at the top of the tank can be used to connect a vent line to the rear axle housing for quicker filling or as a return line when the tank is used as a radiator catch can • Dimensions: 8" length, 3-1/8" diameter, 1 qt. capacity |
| PART # | DESCRIPTION |
| 85450 $142.94 * | Filler/Breather Tank, panel mount |
| PART # | REPLACEMENT PART |
| 97580 $33.60 | Cap |
|
Are available with several different side mounted fitting options
for ease of plumbing . Remote breather tank is a perfect companion for Vacuum Pumps, Dry Sump Tanks or Rear Ends . Aluminum, lightweight tank features a roll bar/chassis tube mount to simplify installation . Features internal baffling with mesh media for separation of air and oil . Includes non-hooded, clamp.on style, filtered breather and a bottom petcock drain . Dimensions: 3-1/8" diameter (without mount), 6-1/2" tank height, 11-1/2" overall height |
| PART # | DESCRIPTION |
| 85461 $133.49 * | Breather Tank, Roll Bar Mount, -12AN Male |
| 85462 $133.49 * | Breather Tank, Roll Bar Mount, 3/8" NPT Female |
| 85463 $133.49 * | Breather Tank, Roll Bar Mount, 1/2" NPT Female |
| PART # | REPLACEMENT PART |
| 97200 $25.53 | Ball Valve, 3/8" Male and Female Ports |
|
MULTI-INLET BREATHER TANK, ROLL BAR MOUNT Fits: Breather Tank, Roll Bar Mount, ½" & 3/8" NPT . Remote breather tank is a perfect companion for Vacuum Pumps, Dry Sump Tanks or Rear Ends . Side mounted 3/8" female fitting and ½" female fitting on roll bar mount side, that are 180 Degrees apart for ease of plumbing . Aluminum, lightweight tank features a roll bar/chassis tube mount to simplify installation . Features internal baffling with mesh media for separation of air and oil . Includes non-hooded, clamp.on style, filtered breather and a bottom petcock drain . Dimensions: 3-1/8" diameter (without mount), 6-1/2" tank height, 11-1/2" overall height |
| PART # | DESCRIPTION |
| 85464 $143.01 * | Breather Tank, Roll Bar Mount, ½" & 3.8 " NPT |
| PART # | REPLACEMENT PART |
| 97200 $25.53 | Ball Valve, 3/8" Male and Female Ports |
|
Use this tank as a remote Air/Oil Separator on Vacuum Pump Systems . Designed to be plumbed between the valve cover and the inlet side of the vacuum pump . Features -12AN inlets and outlets and has a -6AN Drain . Dimensions: 3-3.8 " dia., 6-3/4" overall height |
| PART # | DESCRIPTION |
| 85471 $180.78 * | Air-Oil Separator Tank |
|
• Both heavy duty and good looking–finish can be left
as is, polished, powder coated or painted • Meets requirements of 1-1/2 pint transmission NHRA overflow rule • Prevents fluid mist from spraying on the race surface, behind your car and tires • Pressurized fluid is captured in the Tank and will drain back into the transmission as it cools • Includes breather and billet aluminum mounting bracket (also see No. 41222 below) • Designed with an integral baffle |
| PART # | DESCRIPTION |
| 41221 $215.82 * | Transmission Expansion Tank, Billet Aluminum, 2.75" O.D., 2.715" I.D. x 7.050" long |
| PART # | REPLACEMENT PART |
| 68791 $35.05 | Clamp on breather |
|
TRANSMISSION EXPANSION TANK MOUNTING BRACKET • Mounts tank to rear engine dragsters with GM transmissions; • Compact and made from billet aluminum for strength and durability • Bracket allows tanks to be mounted on either side of transmission • Can be used with Moroso Part Nos. 41221, 85500, 85505 $186.25 with GM Transmissions |
| PART # | DESCRIPTION |
| 41222 | Transmission Expansion Tank Mounting Bracket, Billet Aluminum |
|
• No. 63401 $13.30 fits all 3" to 3.25" diameter
tanks, including Moroso Overflow Tank No. 63657 $52.47 • No. 63402 $21.49 fits all tanks with a 2.44" to 2.69" diameter • Manufactured from a one-piece, zinc plated steel bracket with 11/32" mounting holes and a sliding, stainless steel T-Bolt clamp • Features a locking nut to prevent loosening and a quick disconnect strap • Meets the requirements of all sanctioning bodies |
| PART # | DESCRIPTION |
| 63401 $13.30 |
Universal Tank Mounting Bracket. 3" to 3.25" dia. |
| 63402 $21.49 |
Universal Tank Mounting Bracket. 2.44" to 2.69" dia |
|
Fits: All 3-1/8" diameter tanks such as Moroso Nos. 63660,
85400, 85402, 85404, 85406, 85450, 85465, 85466, 85467, 85470,
85471, 85473. • Manufactured from Billet Aluminum • Back of Bracket has two panel mounting holes for the supplied 1/4" -20 mounting hardware |
| PART # | DESCRIPTION |
| 63403 $70.13 | Billet Aluminum Mounting Bracket, Universal |
|
• Fabricated of aluminum for strength – can be polished,
chromed, powder coated or left as-is for a race look • Built in bracket allows convenient mounting on a panel • -6 AN inlet and -10AN outlet with an internal baffle • Includes a heavy duty vented screw on cap |
| PART # | DESCRIPTION |
| 63506 $133.49 | Power Steering Tank, Universal Panel Mount, Inlet left side |
| 63507 $133.49 | Power Steering Tank, Universal Panel Mount, Inlet right side |
|
1 Quart Capacity Features built-in mounting Inserts • Lightweight durable design has a full quart capacity • Tank features 2 molded in hexagonal mounting inserts with 5/16"-18 thread • Can be used in many forms of competition: NHRA & IHRA accepted • Vented tank includes 3/8" NPT hose fitting and drain cock • Dimensions: 10 ½" high (overall), 3" tank diameter • Mounting hardware included |
| PART # | DESCRIPTION |
| 63657 $52.47 | Overflow Tank, 1 Quart, Built-In Mounting Inserts |
|
. Lightweight Aluminum design holds one full quart capacity . Can be used in many forms of competition: NHRA, IHRA & SCCA accepted . Vented recirculating tank includes push-lock fitting (for 1/4" O.D. flexible tubing), barbed fitting (for 3/8" rubber hose), siphon tube and drain fitting . Dimensions: 9" high (overall), 3-1/8" tank diameter |
| PART # | DESCRIPTION |
| 63660 $137.66 | Radiator Recovery Tank |
| PART # | AVAILABLE OPTIONS |
| 63401 $13.30 | Universal Tank Mounting Bracket. 3" to 3.25" dia. |
| 63403 $70.13 | Billet Aluminum Mounting Bracket, Universal |
| PART # | REPLACEMENT PART |
| 97200 $25.53 | Ball Valve, 3/8" Male and Female Ports |
|
. Billet Aluminum design holds one full quart capacity . Can be used in many forms of competition: NHRA, IHRA & SCCA accepted . Vented recirculating tank includes push-lock fitting (for 1/4" O.D. flexible tubing), barbed fitting (for 3/8" rubber hose), siphon tube and drain fitting . Dimensions: 9" high (overall), 3" tank diameter . Billet mount included |
| PART # | DESCRIPTION |
| 85505 $186.25 | Billet Radiator Recovery Tank |
| PART # | REPLACEMENT PART |
| 97200 $25.53 | Ball Valve, 3/8" Male and Female Ports |
|
• Perfect for cars with low-mount radiators to provide convenient
filling location and to bleed off unwanted air • Available with rugged 6061-T6 billet aluminum filler necks welded to tank to withstand continuous removal and installation of cap • Available in two sizes to simplify installation in tight areas • Each tank includes a 1/8" pipe overflow fitting at neck, a 1/4" NPT water intake bung, and a 1/2" bung at the bottom for plumbing a line to the radiator • 100% pressure tested to eliminate leaks • Accepts a standard-size radiator cap • Dimensions: 6-1/2" H x 7" W |
| PART # | Description | Filler Neck | Capacity | Depth |
| 63650 $138.85 | Expansion Tank | Stamped | 1-1/2 quart | 3-5/8" |
| 63651 $172.76 | Expansion Tank | Billet Aluminum | 1-1/2 quart | 3-5/8" |
| 63655 $138.87 | Expansion Tank | Stamped | 1 quart, low-profile | 2-5/8" |
| 63656 $173.97 | Expansion Tank | Billet Aluminum | 1 quart, low-profile | 2-5/8" |
|
• Designed for several applications where a small volume
remote tank is necessary • Fabricated aluminum with integral mounting bracket • 1-1/4" quart capacity • One 1/2" NPT female fitting on bottom of tank and one 3/8" NPT female fitting on side • Billet filler neck with barbed fitting for overflow hose |
| PART # | DESCRIPTION |
| 63766 $163.27 | Universal Coolant Expansion Tank |
|
UNIVERSAL CATCH/OVERFLOW/RECOVERY TANK • Fabricated of aluminum for strength with integral mounting brackets and a clear coolant level check • Versatile tank can be used for different applications depending how it is plumbed • Side bung 1/4" NPT • With straight barbed fitting, • Bottom bung, 1/4" NPT w/ petcock, 1/4" NPT plug & 1/4" NPT 90° fitting |
| PART # | DESCRIPTION |
| 63769 $183.53 | Catch/Overflow/Recovery Tank, Universal Fit |
|
Fits: Roll Bar Mount, ½" NPT . Aluminum, lightweight tank features a roll bar/chassis tube mount to simplify installation . 22.6 oz capacity . Side mounted ½" NPT female fitting for ease of plumbing . Features billet aluminum radiator neck that accepts standard size radiator caps . Billet aluminum neck has screw-in 1/8" NPT hose fitting . Has a bottom 3/8" drain with plug . Dimensions: 3-1/8" diameter (without mount), 6-1/2" tank height (without billet neck), 7-1/2" overall height |
| PART # | DESCRIPTION |
| 63771 $179.36 | Coolant Expansion Tank, Roll Bar Mount, 1/2" NPT |
| PART # | REPLACEMENT PART |
| 97200 $25.53 | Ball Valve, 3/8" Male and Female Ports |
|
Fits: Camaro SS with Edelbrock Supercharger, 2010-'15 • Direct bolt-in to factory Edelbrock tank • Fabricated of aluminum for strength – can be polished, chromed, powder coated or left as-is for a race look • Can be packed with ice for the track or dyno pulls for quicker E.T’S and more horsepower • Accepts factory screw on cap |
| PART # | DESCRIPTION |
| 63503 | Supercharger Tank, Fits: Camaro SS with EDELBROCK Supercharger, 2010-'15 |
|
Fits: Camaro V-6, SS, 2010-'15 • Fits over factory plastic fuse box lid or brake reservoir tank and can be installed in just minutes • Fabricated out of .100" thick aluminum with TIG welded corners • Improves under-hood appearance, matches Moroso tank line (sold separately) • Can be polished, chromed, powder coated, painted or left as-is for a race look |
| PART # | DESCRIPTION |
| 74246 $65.99 | Brake Reservoir Cover. Fits: Camaro V-6, SS, 2010-'15 |
| 74247 $79.56 | Fuse Box Cover. Fits: Camaro V-6, SS 2010-'11 |
|
Fits: Camaro, 2010-'15 • Attaches over Factory ABS Pump, covers up the “spaghetti-like” tubing that comes out of the pump, including covering the ABS pump itself • Fabricated from .100" thick aluminum with TIG welded corners • Improves under-hood appearance, matches Moroso tank line (sold separately) • Can be polished, chromed, powder coated, painted or left as-is for a race look |
| PART # | DESCRIPTION |
| 74248 $66.04 | ABS Pump Cover, SS, Hardtop Only, 2010-'15 |
| 74258 | ABS Pump Cover, Camaro V-6, 2010-'15 |
|
Billet Aluminum • Billet Aluminum cap cover snaps right on to factory radiator and intercooler caps • Nos. 63802 $55.24 and 63803 $55.24 have knurled, easy-grip design • Moroso Cap Covers complete the look and complement your upgraded tank • Can be polished, chromed, painted, anodized, powder coated or left as-is for a race look |
| PART # | DESCRIPTION |
| 63800 $55.24 |
Radiator & Intercooler Cap Cover Fits: Ford Radiator and Intercooler Cap #s 1W138101AA, F6DZ8100A, RS103, RS527, XL3V8101AA, XL3Z8100AA, 9C3Z-8101B. |
| 63801 $55.24 |
Radiator & Intercooler Cap Cover Fits: Chevrolet Radiator Cap #s 10305080, 20838623, 25713160, RC87, RC107 |
| 63802 $55.24 | Radiator & Intercooler Cap Cover, Knurled Grip. Fits: Ford Radiator and Intercooler Cap #s 1W138101AA, F6DZ8100A, RS103, RS527, XL3V8101AA, XL3Z8100AA, 9C3Z-8101B. |
| 63803 $55.24 | Radiator & Intercooler Cap Cover, Knurled Grip. Fits: Chevrolet Radiator Cap #s 10305080, 20838623, 25713160, RC87, RC107. |
|
Fits: Corvette, 1997-'13 • Direct, bolt-in replacement for stock, cracked or mis-colored tanks • Utilizes O.E.M. mounting points • Fabricated aluminum for strength, factory tanks fail after repeated high heat situations, especially in supercharged or turbocharged applications • Billet aluminum neck accepts stock vented cap, bleeds pressure like the factory intended • This aluminum tank can be polished, chromed, painted, powder coated or left as-is for a race look • Includes integral billet aluminum hose fittings that are better looking and more trouble free than screw in fittings • Does not allow use of factory coolant level sensor if equipped |
| PART # | DESCRIPTION |
| 63787 $413.05 | Coolant Expansion Tank |
|
Fits: Corvette 1997-'13 (Except ZR1) • Direct, bolt-in replacement for O.E.M. tank, also fits GM Accessory Drive Kits 19155066, & 19155967. • Fabricated aluminum for strength, factory tanks fail after repeated high heat situations • Billet aluminum neck accepts the stock cap • This aluminum tank can be polished, chromed, painted, powder coated or left as-is for a race look • Tank is baffled, includes integral mounting bracket and billet aluminum hose fittings that are better looking and more trouble-free than screw-in fittings |
| PART # | DESCRIPTION |
| 63788 $198.25 |
Power Steering Tank. Fits: Corvette, 1997- '13 (except ZR1) |
|
Fits: Corvette, 1997-’08 & Cadillac XLR, 2004-’08 • Fabricated .100" thick aluminum, fits over existing plastic fuse box lid • Improves under-hood appearance, matching Moroso tank line (sold separately) • Can be polished, chromed, powder coated, painted or left as-is for a race look |
| PART # | DESCRIPTION |
| 74240 $65.99 | Brake Booster Cover |
|
Fits: Corvette, 1997-’04 • Fabricated .100" thick aluminum, fits over existing plastic fuse box lid • Improves under-hood appearance, matching Moroso tank line (sold separately) • Can be polished, chromed, powder coated, painted or left as-is for a race look |
| PART # | DESCRIPTION |
| 74241 $94.34 |
Fuse Box Cover Fits: Corvette, 1997-’04 |
|
For Dodge/Chrysler 300C, Challenger, Charger Hellcat, Magnum • Direct bolt-In replacement to stock plastic tanks • Fabricated of aluminum for strength – can be polished, chromed, powder coated or left as-is for a race look • Plastic coolant tanks fail after repeated high heat situations • Has a built-in overflow expansion reservoir like the factory tank (except Moroso No. 63796) • Features a robust billet aluminum filler neck, fittings and power steering tabs • Increased coolant capacity over stock tanks • Use with Moroso No. 63498 $213.18 Power Steering Tank for the most eye catching result, the factory power steering tank will also fit up • Optional Moroso Racing Radiator Caps, see page 251 |
| PART # | DESCRIPTION |
| 63796 $433.16 |
Coolant Expansion Tank. Fits: Dodge/Chrysler 300C, Challenger, Charger, 2011-'14 63497 $541.26 Coolant Expansion Tank, with two power steering tab locations, for mounting an aftermarket intake shield, can be used with a stock intake. Fits: Dodge/Chrysler Challenger, Charger, Magnum with 2.7, 3.5, 5.7 and 6.1L Engines, 2005-'10 |
| 63499 $538.45 |
Coolant Expansion Tank, with one power steering tab location,
for use with a stock intake or aftermarket intake that does not
use the power steering tab to mount the intake shield Fits: Dodge/Chrysler Challenger, Charger, Magnum with 2.7, 3.5, 5.7 and 6.1L Engines, 2005-'10 |
| 63812 $538.45 |
Coolant Expansion Tank Fits: Dodge/Chrysler Challenger & Charger, SRT8, Hellcat, 2015-'17, |
|
CHALLENGER & CHARGER HELLCAT, 2015-17 • Supercharged cars run hot so increased cooling capacity is a must for horsepower • Direct bolt-in replacement, uses factory mounting bracket • Fabricated of aluminum for strength – can be polished, chromed, powder coated or left as-is for a race look • Can be packed with ice for the track or dyno pulls for quicker E.T’S and more horsepower • Features billet aluminum neck and comes with Moroso Radiator Cap |
| PART # | DESCRIPTION |
| 63809 $294.19 | Supercharger Tank, Dodge/Chrysler Challenger & Charger Hellcat, 2015-'17 |
|
COOLANT EXPANSION TANK, NISSAN R35 GT-R, 2009-'16 • Direct bolt-in replacement to stock multi-piece plastic tank • Fabricated Aluminum for strength, factory tanks fail after repeated high heat situations • Will not turn "yellow" or "break down" like the factory plastic tank does • This Aluminum tank can be polished, chromed, painted, powder coated or left as is for a race look • Billet aluminum neck accepts the factory stock vented cap • Has 50% more capacity than the stock plastic tank |
| PART # | DESCRIPTION |
| 63811 $484.45 | Coolant Expansion Tank, Nissan R35 GT-R, 2009-'16 |
|
For Dodge/Chrysler 300C, Challenger, Charger, Magnum • Manufactured from aluminum for strength • Direct bolt-in to factory tank • A much stronger and better looking tank than the plastic factory tank • Baffled and complete with integral mounting bracket & fittings • Accepts factory screw-on cap • Finish can be polished, chromed, painted, powder coated or left as-is for a race look • Fits on Moroso No. 63497 $541.26 or stock |
| PART # | DESCRIPTION |
| 63498 $213.18 |
Power Steering Tank Fits: Dodge Cars with 2.7, 3.5, 5.7 and 6.1L Engines, 2005 -'10 |
|
Fits: Dodge Challenger, 2008-'14 • Fabricated .100" thick Aluminum, fits over existing plastic fuse box lid • Improves under-hood appearance, matches Moroso tank line (sold separately) • Can be polished, chromed, powder coated, painted or left as is for a race look |
| PART # | DESCRIPTION |
| 74226 $93.06 | Fuse Box Cover |
|
Fits: BMW E36, 1992-'99, Z3 and BMW E46 M3, 2001-'06 • Direct bolt-in replacement to stock 2 piece plastic tank • Fabricated Aluminum for strength, factory tanks fail after repeated high heat situations and age • No cutting of factory hoses is required and accepts the factory clip-on hose • Included is a Moroso No. 63324 $18.82 racing radiator cap that operates in the same pressure range as the factory cap • The Moroso radiator cap mounts to a billet aluminum neck that will not strip out like plastic threaded necks • This Aluminum tank can be polished, chromed, painted, powder coated or left as is for a race look. |
| PART # | DESCRIPTION |
| 63791 $461.54 | Coolant Expansion Tank, Fits: BMW E36, 1992-'99, Z3 |
| 63793 $449.43 | Coolant Expansion Tank, Includes Sight Gauge, Fits: BMW E46 M3, 2001-'06 |
|
Fits: Ford Mustang, 1986-’93 * Requires the use of ’90-’93 Mustang Low Coolant Sensor, Ford Replacement Part No. 10D968 • Direct bolt-in replacement for stock, cracked or mis-colored tanks • Fabricated Aluminum for strength, factory tanks fail after repeated high heat situations • Billet aluminum neck accepts stock cap with sensor or stock cap without sensor • This Aluminum tank can be polished, chromed, painted, powder coated or left as is for a race look. • Includes integral billet aluminum hose fittings that are better looking and more trouble free than screw in fittings. |
| PART # | DESCRIPTION |
| 63786 $183.48 |
Coolant Expansion Tank. Fits: Ford Mustang, 1986-'93 |
|
Fits: Ford Mustangs • Direct bolt-in replacement to stock two piece plastic tank • Fabricated aluminum for strength, factory tanks fail after repeated high heat situations • This aluminum tank can be polished, chromed, powder coated or left as-is for a race look • Uses factory stock vented cap, bleeds pressure like the factory intended, except No. 63782 $352.16 • Integral fittings are more reliable than screw-in style on competitor tanks |
| PART # | DESCRIPTION |
| 63767 $254.95 |
Coolant Expansion Tank. Fits: Ford Mustang, 1996-'04 |
| 63768 $224.01 |
Coolant Expansion Tank. Fits: Ford Mustang, V6 & GT, 2005-'10, GT500, 2007-'10 |
| 63782 $352.16 | Coolant Expansion Tank with Built-in Overflow Reservior as required by NHRA & SCCA Fits: Ford Mustang, 2005-'10 |
| 63783 $244.30 |
Coolant Expansion Tank. Fits: Ford Mustang, V6 & GT, 2011-'14* |
| 63806 $260.44 |
Coolant Expansion Tank. Fits: Mustang, 2015-'17 |
|
Fits: Ford including Mustang • Manufactured from aluminum for strength and lightweight • Direct bolt-in to factory tank • A much stronger and better looking tank than the plastic factory tank • Baffled and complete with cap, integral mounting bracket and fittings to ensure a factory replacement part • Can be polished, chromed, painted, powder coated or left as-is for a race look • Integral fittings are more reliable than screw-in style on competitors tanks |
| PART # | DESCRIPTION |
| 63490 $157.80 |
Power Steering Tank. Fits: Mustang, 1999-’04, Expedition, 1997-’02, F-150, 1997-’03, Ranger, 1998-’01, Explorer, 1995-’01, Crown Victoria, 1998-’04 |
| 63491 $168.62 |
Power Steering Tank. Fits: Mustang, 2005-’10 |
| 63501 $172.68 |
Power Steering Tank. Fits: Mustang Shelby GT500, 2007-’10 |
|
Keeps Supercharged Engines Running Cooler • Supercharged cars run hot so increased cooling capacity is a must for horsepower • Fabricated of aluminum for strength—can be polished, chromed, powder coated or left as-is for a race look • Nos. 63492, 63493, 63494 $290.13 and 63495 $290.13 include a fuel cell style filler cap Nos. 63492, 63493 $512.95 and 63508 $495.41 have filtered outlet strainer • Tanks can be packed with dry ice or ice for the track or dyno pulls for quicker E.T’S and more horsepower • Increased coolant capacity over stock tanks • Nos. 63492, 63493, 63496, 63502 $392.76 and 63508 $495.41 are direct bolt-in replacement to stock plastic tank • For Nos. 63494 $290.13 and 63495 $290.13 battery needs to be relocated—use Moroso Sealed Battery Box No. 74051 $101.06 |
| PART # | DESCRIPTION |
| 63492 $512.95 | Supercharger Coolant Tank. Fits: Mustang Cobra, 2003-'04 |
| 63493 $512.95 | Supercharger Coolant Tank. Fits: GT500, 2007-'12 |
| 63494 $290.13 |
Supercharger Coolant Tank. Fits: Mustang, 2005 -'14 |
| 63495 $290.13 | Supercharger Coolant Tank. Fits: Mustang, 1996-'04 |
| 63496 $404.87 |
Roush® Supercharger Tank Fits: Roush Mustang, 2005-’09, Ford Racing Mustang Supercharger, 2011-'14 and Camaro SS, 2010-'13 with Whipple Supercharger |
| 63502 $392.76 | Supercharger Coolant Tank. Fits: Roush Mustang, 2010-'14 |
| 63508 $495.41 | Supercharger Tank. Fits: Mustang GT 500, 2013-'14 |
| PART # | AVAILABLE OPTION |
| 74051 $101.06 | Sealed Battery Box |
|
FORD PERFORMANCE & ROUSH PERFORMANCE SUPERCHARGER KITS • Direct bolt-in replacement for the tank that comes in the Ford Performance Part No. M-6066-M8627 supercharger kit or Roush Performance Part Nos. 421542, 421823 & 422001 supercharger kits ortanks factory installed on Roush supercharged Mustangs • Fabricated of aluminum for strength – can be polished, chromed, powder coated or left as-is for a race look • Can be packed with ice for the track or dyno pulls for quicker E.T’S and more horsepower • Accepts factory screw on cap |
| PART # | DESCRIPTION |
| 63509 $500.66 | Supercharger Tank, Mustang 2015-'17 |
|
BRAKE RESERVOIR, FUSE BOX COVERS, MUSTANG, 2015-'17 Fits: Mustang GT/Ecoboost/ V-6, 2015-'17 • Fuse Box Cover, Fabricated .100 thick Aluminum, fits over existing plastic fuse box lid • Brake Reservoir Cover, Fabricated .100 thick Alum., fits over factory reservoir • Improves under-hood appearance, Matching Moroso tank line (sold separately) • Can be polished, chromed, powder coated, painted or left as is for a race look |
| PART # | DESCRIPTION |
| 74255 $65.99 | Fuse Box Cover, Mustang, 2015-'17 |
| 74256 $65.99 | Brake Reservoir Cover, Mustang, 2015-'17 |
|
BATTERY, BRAKE RESERVOIR, COIL SHEILD & FUSE BOX COVERS Fits: Mustang, 1979 -'14 • Fits over the factory plastic and can be installed in just minutes • Fabricated from .100 thick Aluminum with TIG Welded Corners • Improves under-hood appearance, Matching Moroso tank line (sold separately) • Can be polished, chromed, powder coated, painted or left as is for a race look |
| PART # | DESCRIPTION |
| 74220 $65.99 | Fuse Box Cover. Fits: Mustang, 2005-’09 |
| 74221 $65.99 * | Brake Reservoir Cover. Fits: Mustang, 2005-Mid 2008 |
| 74222 $65.99 + | Brake Reservoir Cover. Fits: Mustang, Mid 2008-'14 |
| 74224 $65.99 | Fuse Box Cover. Fits: Mustang GT 500, 2007-’09 |
| 74225 $113.20 | Battery Cover. Fits: Mustang, 2005-'14 |
| 74228 $65.99 | Fuse Box Cover. Fits: Mustang, 2010-'14 |
| 74229 $65.99 | Brake Reservoir Cover. Fits: Mustang, 1996-’04 |
| 74230 $65.99 | Fuse Box Cover. Fits: Mustang, 1999-’04 |
| 74253 $63.40 | Brake Reservoir Cover. Fits: Mustang, 1979-’93 |
| 74254 $64.69 | Coil Shield Cover. Fits: Mustang, 1986-’93 |
|
MUSTANG GT 500, 2007-’12, DUAL TANK, STOCK CAPS Combines A Coolant & Supercharger Tank Into One Unit • Two separate tanks integrated together to look like one • Directly bolts in place of factory installed coolant and supercharger tanks • Tanks are oversized to aid in cooling, supercharged cars run hot so increased cooling capacity is a must for horsepower • Fabricated of aluminum for strength – can be polished, chromed, powder coated or left as-is for a race look • Can be packed with ice for the track or dyno pulls for quicker E.T’S and more horsepower • Includes heavy duty mounting bracket |
| PART # | DESCRIPTION |
| 63804 $1,051.50 | Dual Tank, Mustang GT 500, 2007-’12, stock caps |
| 63805 $1,051.50 | Dual Tank, Mustang GT 500, 2007-'12, stock cap with fuel cell style cap on Supercharger Tank |
|
Fits: Lotus Elise, Exige, 2005-'11 • Fits Normally Aspirated, OEM and Aftermarket Forced Induction vehicles • Direct bolt-in replacement to stock plastic tank • Fabricated aluminum for strength, factory tanks fail after repeated high heat situations • This aluminum tank can be polished, chromed, painted, powder coated or left as is for a race look. • Features billet aluminum radiator neck, sight glass to check the level of coolant and manual bleed valve • Includes Part No. 63316 $18.82 radiator cap |
| PART # | DESCRIPTION |
| 63797 $391.47 | Coolant Expansion Tank. Fits: Lotus Elise/Exige, 2005-’11 |
|
Fits: Mazda Miata, 1990-'97 and 1999-'05 • Direct bolt-in replacement to stock 2 piece plastic tank • Fabricated Aluminum for strength, factory tanks fail after repeated high heat situations • This aluminum tank can be polished, chromed, powder coated or left as-is for a race look • Comes with billet aluminum cap |
| PART # | DESCRIPTION |
| 63780 $249.64 | Coolant Expansion Tank. Fits: Mazda Miata, 1990-'97 |
| 63781 $248.20 | Coolant Expansion Tank. Fits: Mazda Miata 1999-'05 |
|
Fits: Subaru Impreza, WRX/STI, 2002-'07 • Direct bolt-in replacement for stock, cracked or dis-colored tanks • Fabricated aluminum for strength, factory tanks fail after repeated high-heat situations • This aluminum tank can be polished, chromed, painted, powder coated or left as-is for a race look • Has a provision for the factory siphon hose • Includes a billet aluminum cap with O-ring |
| PART # | DESCRIPTION |
| 63785 $249.64 | Coolant Tank |
|
Fits: Subaru WRX/STI, 2002-'07, Forester XT Turbo, 2004-'08 • Direct bolt-in replacement for stock tanks • Has 50% more capacity than Subaru stock tank • Fabricated aluminum for strength, factory tanks fail after repeated highheat situations • Finish can be polished, chromed, painted, powder coated or left as-is for a race look • Includes billet aluminum filler neck, Moroso Racing Radiator Cap in the stock pressure range and integral billet aluminum hose fittings that are better looking and more trouble-free than screw in fittings • By having this style of radiator neck, the user can change the operating pressure by purchasing Moroso’s No. 63328 $18.82 Racing Radiator Cap in the 27-29 lbs. range |
| PART # | DESCRIPTION |
| 63784 $221.33 | Intercooler Tank |
| PART # | AVAILABLE OPTION |
| 63328 $18.82 | Racing Radiator Cap, 27-29 lbs. |
|
Fits: Subaru WRX, 2008-’14 • Direct bolt-in replacement to stock tank with increased capacity • Fabricated Aluminum for strength, factory tanks fail after repeated high heat situations • This Aluminum tank can be polished, chromed, painted, powder coated or left as is for a race look • Includes Moroso Racing Radiator Cap in the stock pressure range and integral billet aluminum hose fittings that are better looking and more trouble free than screw in fittings • With this style of radiator neck, you can change the operating pressure using Moroso Part No. 63328 $18.82 Racing Radiator Cap in the 27-29 lbs range • Tank is designed to be used with an Aftermarket "Cone Air Filter" intake, doesn't fit with O.E.M. Panel Air Filter Intake |
| PART # | DESCRIPTION |
| 63795 $267.19 | Intercooler Tank |
| PART # | AVAILABLE OPTION |
| 63328 $18.82 | Racing Radiator Cap, 27-29 lbs. |
|
Fits: Subaru WRX/STI/Impreza 2.5 RS, 2006-’07 • Fabricated .100" thick Aluminum, fits over existing plastic fuse box lid • Improves under-hood appearance, matches Moroso tank line (sold separately) • Can be polished, chromed, powder coated, painted or left as is for a race look |
| PART # | DESCRIPTION |
| 74231 $63.40 | Fuse Box Cover |
|
ALUMINUM TRANSMISSION PANS • Fully fabricated with one-piece billet rail • Reduce temperature and improve oil control • Features dual fittings with magnetic drain plugs • Includes serrated flange hex bolts (No. 42050 $392.74 includes metric studs) |
|
TRANSMISSION PAN & GASKET CHART See Moroso Transmission Pan Gaskets on pg.203 and Replacement Drain Plugs on pg. 105 |
| Trans. Type | Trans. Pan Part # | Depth | Included | Filter Recom- mded | Gasket Part # | Repace- ment Drain Plug |
| GM Power- glide | 42000 $267.18 | 3.080" | Filter Spacer | Fram FT1017 | 93100 $39.06 | 97002 $10.71 |
| GM Power- glide | 42001 $236.18 | 1.830" | N/A | Fram FT1017 | 93100 $39.06 | 97002 $10.71 |
| GM Turbo 350 | 42010 $322.45 | 3.000" | Filter Spacer | Fram FT1021 | 93102 $39.04 | 97002 $10.71 |
| GM Turbo 400 | 42020 $371.17 | 3.000" | Filter Extension | Fram FT1020 | 93103 $39.10 | 97002 $10.71 |
| GM 3L80 | 42020 $371.17 | 3.000" | Filter Extension | Fram FT1074 | 93103 $39.10 | 97002 $10.71 |
| GM 700R4 | 42025 $267.17 | 2.375" | N/A | Fram FT1074 | N/A | 97002 $10.71 |
| GM 4L60E | 42025 $267.17 | 2.375" | N/A | Fram FT1201 | N/A | 97002 $10.71 |
| GM 4L65E | 42025 $267.17 | 2.375" | N/A | Fram FT1201 | N/A | 97002 $10.71 |
| GM 4L70E | 42025 $267.17 | 2.375" | N/A | Fram FT1201 | N/A | 97002 $10.71 |
| Camaro SS '10 - up | 42030 $368.40 | 3.350" | N/A | AC Delco 24236931 | N/A | 97002 $10.71 |
| Ford C4 '70-up | 42040 $256.45 | 3.080" | N/A |
Fram FT1028 Fram FT1035 |
93107 $36.36 | 97002 $10.71 |
| Ford C4 Pre-'70 | 42040 $256.45 | 3.080" | N/A | Fram FT1027A | 93107 $36.36 | 97002 $10.71 |
| Ford E40D/4R100 | 42050 $392.74 | 3.642" | N/A | Motorcraft FT113 | N/A | 97002 $10.71 |
| Ford C6 | 42060 $321.14 | 2.000" | N/A | Ford D3TZ7A098B, Fram FT1035 | 93108 $39.10 | 97002 $10.71 |
| Chrysler A-904 | 42090 $365.65 | 2.250" | Filter Spacer | Fram FT1039 | N/A | 97002 $10.71 |
| Chrysler 727 | 42080 $365.65 | 2.330" | Filter Spacer | Fram FT1039 | 93110 $39.00 | 97002 $10.71 |
|
PERM-ALIGN TRANSMISSION GASKETS . Manufactured from 40 durometer rubber that is vulcanized to a rigid steel frame . The extra-strength design will not leak, split, fail like O.E.M., stock or inferior quality aftermarket gaskets . Gaskets require no sealant, which allows for quick removal and installation of transmission pans . Rubber/Steel gasket outlast cork compsites to provide years of dependable service . Full 3/16" thick . One per package |
| PART # | DESCRIPTION |
| 93100 $39.06 | Perm-Align Transmission Gasket Fits: Moroso Powerglide Pans No. 42000 $267.18 and 42001 $236.18 |
| 93102 $39.04 | Perm-Align Transmission Gasket Fits: GM Turbo 350, Moroso Transmission Pan No. 42010 $322.45 |
| 93103 $39.10 | Perm-Align Transmission Gasket Fits: GM Turbo 400, Moroso Transmission Pan No. 42020 $371.17 |
| 93105 $45.75 | Perm-Align Transmission Gasket Fits: Ford E40D/4R100, Moroso Transmission Pan No. 42050 $392.74 |
| 93106 $40.45 | Perm-Align Transmission Gasket Fits: Ford AOD, AODE and 4R70W |
| 93107 $36.36 | Perm-Align Transmission Gasket Fits: Ford C4, Moroso Transmission Pan No. 42040 $256.45 |
| 93108 $39.10 | Perm-Align Transmission Gasket Fits: Ford C6, Moroso Transmission Pan No. 42060 $321.14 |
| 93110 $39.00 | Perm-Align Transmission Gasket Fits: Chrysler Torqueflite 727, Moroso Transmission Pan No. 42080 $365.65 |
|
TRANSMISSION DIPSTICKS • Custom designed for each transmission application listed, to work with the popular shields being used • Each assembly is constructed out of heavy duty hydraulic tubing, fixture welded for a precision fit and black powder coated • Threaded knob design stays locked to tube under high transmission pressure and vibration levels • Heavy duty cable with a "full" and "fill" area to indicate desired fluid level • Required by NHRA/IHRA for cars running 10.99 or quicker |
| PART # | DESCRIPTION |
| 41300 $86.27 | Transmission Dipstick, Locking Style, OE Long Style. Fits: GM Powerglide |
| 41301 $84.93 | Transmission Dipstick, Locking Style, Short Dragster Style. Fits: GM Powerglide |
| 41302 $86.21 | Transmission Dipstick, Locking Style, OE Long Style. Fits: GM Turbo 350 |
| 41303 $90.38 | Transmission Dipstick, Locking Style, OE Long Style. Fits: GM Turbo 400 |
| 41305 $94.34 | Transmission Dipstick, Locking Style, OE Long Style/Case Style. Fits: Ford C4 |
|
ROLLER PILOT BEARING • Unlike other roller pilot bearings, this high speed bearing is designed as a direct replacement in all Chevrolet V8’s and 90° V6’s (also fits 1976 and later V6 Buick) • Requires no modification to either crank or input shafts • Eliminates premature bearing failure and insures clean clutch release by maintaining true alignment of clutch disc to flywheel • Packed with high temperature grease for proper lubrication under extreme high heat conditions • Suitable for all high performance applications including drag, oval track/road race and street • 1.093" O.D. x .591" I.D. x .72" Depth • One per package |
| PART # | DESCRIPTION |
| 41100 $28.20 | Roller Pilot Bearing, Chevrolet V8 and 90° V6 |
|
AUTOMATIC TRANSMISSION COOLERS Available With & Without Filters • Heat sink design dissipates the excessive heat bild up in racing transmissions • Can be used on the street as an auxiliary cooler in conjunction with a stock cooler • Withstands up to 100 lbs of pressure • Made of aluminum, very easy to install with built-in mounting tabs • Includes two- 6 AN O-ring fittings and all necessary installation instructions |
| Part # | Includes a Filter with a Magnet | Wear Particles are Filtered Down to | Square Inches of Radiation Surface | Deminsions | Weight |
| 41200 $148.42 | Yes | 10 Microns | 500 | 3” H x 3” W x 12” L | 1.00 |
| 41201 $137.54 | No | N/A | 500 | 3” H x 3” W x 12” L | 1.00 |
| 41205 $280.68 | Yes | 10 Microns | 1072 | 3-1/2” H x 6-1/4” W x 18” L | 4.70 |
| PART # | REPLACEMENT PARTS |
| 97290 $30.96 | Filter Cartridge for part No. 41200 $148.42 |
| 97291 $44.43 | Filter Cartridge for part No. 41205 $280.68 |
|
. Another time saver from Moroso . Eliminates the messy spilling of transmission fluid during transmission removal, replacement and storage . One per package |
| PART # | DESCRIPTION |
| 41060 $10.79 | Transmission Tailshaft Plug, 1-1/2" O.D., Early Muncie, Borg-Warner, Ford, Chrysler, Chevrolet Powerglide |
| . Special fasteners provide maximum holding strength & eliminate the possibility of shearing |
| PART # | DESCRIPTION |
| 38764 $10.40 | Torque Converter Bolts, Grade 8 bolts with nuts for Turbo 350, 400 flex plates without tapped holes, 3/8" -24 x 5/8". Set of 3. |
| 38765 $9.96 | Torque Converter Bolts, Grade 5 bolts for Turbo 350, 400 flex plates w/tapped holes, 3/8" -16 x 5/8", Set of 3 |
|
A & B EPOXY • Two-part bonding product molds like putty, yet hardens to steel-like consistency • Does not shrink and is not affected by solvents, oils or gasoline • Maximum use temperature of 250°F makes it perfect for repairing intake manifolds, cylinder head intake ports, heads and blocks • Also useful for filling crevices in lifter galleries and installing filter screens • Can be drilled and tapped when hard • Adheres to almost any clean surface and hardens in 60 min. at 75°F • One year shelf life • Not recommended to be used with E85 |
| PART # | DESCRIPTION |
| 35560 $39.00 | A & B Epoxy, 1 lb. |
|
• High-performance, extreme high-pressure gear lube • Multi-purpose applications including manual transmissions and both conventional and posi-traction differentials • Contains special "clinging" agents that provide direct adhesion to all moving parts; whereas conventional lubes rely on "splashing and sloshing" to distribute lubricant • Increased speed of rotating parts causes continuous film of oil to "climb" and spread over surfaces • Insures complete lubrication of gears, bearings, bushings, shift yokes, synchros, etc. |
| PART # | DESCRIPTION |
| 34800 $27.00 | Climbing Gear Lube, 1 quart |
|
• Heavy-duty assembly lubricant is specially formulated
to reduce friction and wear on all metal surfaces • Extends the life of parts subjected to extreme heat during racing • Contains molybdenum disulfide (MoS2), which greatly reduces friction and wear • Moly formula coats surfaces with film that chemically bonds itself to metals, filling in the microscopic "hills and valleys" present in all metal surfaces • Surface areas coated with Moly Paste™ retain an unbroken film of lubricant that reduces metal to metal contact and reduces risk of component failure • Recommended for use on cams, lifters, bearings, gears, etc. Very effective when storing an engine |
| PART # | DESCRIPTION |
| 35000 $24.14 | Moly Paste™ Assembly Lube, 4 oz. tube |
|
ENGINE BLOCK FILLER • Just fill with water, mix and pour into block before machining • Helps prevent thin cylinder walls from cracking and improves ring seal by keeping cylinders round • Also dampens unwanted vibrations • Has expansion rate very similar to cast-iron • Highly regarded by "Mountain Motor" authority Scott Shafiroff • Easy to follow, detailed instructions |
| PART # | DESCRIPTION |
| 35570 $91.69 | Engine Block Filler. One case of four one-gallon containers; enough for one block |
| 35571 $28.26 | Engine Block Filler. One-gallon container |
|
RACE WRITE Goes on smoothly and evenly with a bright white finish • A single marker for use on both tires and windows • Use on windows to mark dial-in/class • Use on tires to check slippage and sidewall deflection • Use on Wheel-E-BarsTM to aid in chassis tuning • Use on the car when it’s time to sell • Easy to apply applicator, safe on glass and Lexan® • Wipes clean with a dry rag |
| PART # | DESCRIPTION |
| 35581 $8.40 | Race Write. 3 oz. single bottle |
|
• The best Chemical Sealer you can buy to stop cooling system
leaks • Works equally well in aluminum or cast-iron blocks • Cooling system must be thoroughly clean before use • Does not work with antifreeze • If this doesn’t stop the leaks, find yourself a welder! |
| PART # | DESCRIPTION |
| 35500 $22.84 * | Ceramic Engine Seal. One pint plastic bottle. Do not use with antifreeze |
|
• Specially formulated to stop coolingsystem leaks when
antifreeze is present • Ideal for stopping radiator leaks and sealing cracked blocks in sub-freezingconditions • Works best when cooling system hasbeen thoroughly cleaned and flushed |
| PART # | DESCRIPTION |
| 35520 $22.84 * | All Weather Seal. One pint plastic bottle. Can be used with antifreeze |
| Caution: Never remove a radiator cap when engine is hot and under pressure! Open the petcock slowly to relieve pressure, then carefully take off radiator cap. |
| WARNING: No. 35500, and 35520, — Avoid contact with eyes or skin. Do not take internally. If splashed on skin, wash thoroughly with cold water. If splashed in eyes, flush thoroughly for 15 minutes with cool water and consult a physician |
|
If taken internally, drink 3 or 4 glasses of milk or water. DO
NOT induce vomiting. Call a physician mmediately. ALWAYS KEEP OUT OF CHILDREN’S REACH. |
|
TECH TIP: USING MOROSO CERAMIC ENGINE SEAL & ALL WEATHER
SEAL SAFELY For best results, open the petcock and drain coolant into container for safe disposal. Remove radiator cap. Use a hose to add water keeping radiator full with petcock open and draining. Start engine and continue draining until water runs clear. Close petcock and refill with clear water leaving enough room for sealer additive. NOTE: Ceramic Engine Seal and All Weather Seal cannot remain in cooling system for more than 24 hours! |
|
DECK PLUG KIT . Upper cylinder wall distortion is greatly reduced when these 3/4" NPT plugs are installed in the water passage holes in the decks of Small Block and 90° V6 Chevy engines . Water holes must be tapped before the plugs are screwed in; block must also be decked after installation . Plugs also restrict water flow to the cylinder heads by reducing size of water passage holes to 5/16" . Packaged six to a kit |
| PART # | DESCRIPTION |
| 37800 $21.48 | Plug Kit, Small Block and 90° V6 Chevy |
|
. Use on most aftermarket aluminum blocks and heads to replace
plugs removed or damaged during machining, cleaning, etc. . Available in two sizes, each with 3/8" hex socket drive for ease of installation and removal . Two per package |
| PART # | DESCRIPTION |
| 37810 $9.30 | Aluminum Pipe Plugs, 1/2" NPT thread |
| 37812 $9.30 | Aluminum Pipe Plugs, 3/8" NPT thread |
|
. Chrome plated steel pipe plugs dress up often forgotten areas . Available for several NPT sizes . Use to plug vacuum accessory holes in manifolds, fill plug holes in transmissions and rear ends, or any other spot that accepts a pipe plug |
| PART # | DESCRIPTION |
| 39152 $13.34 | Chrome Plated Pipe Plugs, 3/8" NPT, four per pack |
| 39153 $12.04 | Chrome Plated Pipe Plugs, 1/2" NPT, two per pack |
| 39154 $13.41 | Chrome Plated Pipe Plugs, 3/4" NPT, two per pack |
|
• Offset cylinder head dowels reposition the cylinder heads
upwards on the block (toward the lifter valley), moving valves
away from cylinder wall for improved intake flow • One package contains 4 alloy steel dowels |
| PART # | DESCRIPTION |
| 37900 $26.88 | Offset Cylinder Head Dowels, Big Block Chevy and Big Block Chrysler .030" offset |
| 37920 $17.44 | Offset Cylinder Head Dowels, Small Block Chevy and Small Block Chrysler .015" offset |
| 37930 $17.44 | Offset Cylinder Head Dowels, Small Block Chevy and Small Block Chrysler .030" offset |
|
EXTRA LONG BELLHOUSING DOWEL PINS • Provides an easy method of properly aligning the transmission input shaft to the crankshaft pilot bearing • Extra long to simplify the task of installing a bellhousing on the engine block • Offset Dowel Pins include set screws and instructions for locking pins into place; drilling and tapping of block required • Getting alignment concentric to within ±.005" insures a clean clutch release, maximum pilot bearing and transmission life and reduced shifting problems • .625" diameter • Two per package • Fits virtually all GM V8 and V6 blocks |
| PART # | DESCRIPTION |
| 37932 $18.78 | Bellhousing Dowel Pins, standard, 1.500 long |
| 37934 $22.87 | Bellhousing Dowel Pins, .007 offset, 1.328 long |
| 37936 $22.87 | Bellhousing Dowel Pins, .014 offset, 1.328 long |
| 37938 $22.87 | Bellhousing Dowel Pins, .021 offset, 1.328 long |
| PART # | DESCRIPTION |
| 37944 |
Bellhousing Pin/Sleeve Kit Fits: BB, SBC & SB Ford. Use with 1/8" steel mid plate, welding required |
|
. Not your ordinary hardware store variety! . Moroso Head Bolt Washers are designed for the racer; machined from tough 4130 chrome moly steel, heat treated to proper hardness and parallel-ground . Stress loads are more evenly distributed and torque readings more accurate . Can also be used on main bearing caps, rocker arm stands, and other engine components . Use them over and over again |
| PART # | DESCRIPTION |
| 38300 $36.38 | Chrome-Moly Head Bolt Washers, 7/16", Small Block and 90° V6 Chevy, Pack of 34 |
| 38310 $37.69 | Chrome-Moly Head Bolt Washers, 1/2", Pack of 30 |
| Note: These washers are a must when using aluminum heads. Chamfered side of the washer should be toward the head of the bolt. |
|
Fits: BBC with Moroso Part Nos. 68420, 68425, 68426, 68429
$264.40 and 68432 $313.15 valve covers • Set includes Lock Nuts, Studs ¼"-20 x 3-¼", and Set Screws • Lock Nuts have a clear zinc finish |
| PART # | DESCRIPTION |
| 68562 $16.13 | Valve Cover Lock Nuts for BBC |
|
OIL PUMP STUD KIT, Chevrolet . Wet sump oil pump stud (7/16" x 3-3/16") is manufactured from 4130 chrome moly steel . Provides improved mounting for all Moroso oil pumps or stock pumps on Small Block, Big Block and 90° V6 Chevy engines . Kit includes a nut and hardened/ground washer |
| PART # | DESCRIPTION |
| 38150 $13.32 | Oil Pump Stud Kit, SBC, BBC and 90° V6 Chevy |
|
. Studs are stronger and better at maintaining torque than factory
bolts . Provides secure mounting for Moroso oil pump pickups or stock pump pickups . Kit includes flat washer and hex nut and serrated nut for windage tray |
| PART # | DESCRIPTION |
| 38193 $28.27 | Oil Pump Pickup Stud Kit, 7/16" /20, Ford 302 |
| 38194 $30.85 | Oil Pump Pickup Stud Kit, 1/2" /20, Ford 351W, 302R |
|
• Required to fasten a Moroso no. 22930 $94.34 or 22935
$90.33 Windage Tray to the main caps • Kits include quantity 4 of; studs, main cap nuts, windage tray nuts and 8 washers • Engineered to allow adjustment of the distance of the Windage Tray from the rotating assembly |
| PART # | DESCRIPTION |
| 38191 $84.89 | Windage Tray Mounting Stud Kit for no. 22930, Ford 289-302 |
| 38192 $111.87 | Windage Tray Mounting Stud Kit for no. 22935, Ford 351W, Ford 302R |
|
. "Bullet Nose" studs are rounded on one end, making
it easy to start nuts . Kits include 4 studs, hardened flat washers and jam nuts |
| PART # | DESCRIPTION |
| 37950 $12.00 | Carburetor Stud Kit, Fits carbs. with 1/2" thick flange base, 5/16" -18 and 24 x 1-3/8" long |
| 37955 $16.04 | Carburetor Stud Kit, for 1/2" thick carburetor spacers 5/16" - 18 thread and 2" Long |
| 37960 $13.30 | Carburetor Stud Kit, Fits carbs. with 1/2" thick flange base with a 1" spacer or with one or two, 1/2" spacers, 5/16" -18 and 24 x 2-1/2" long |
| 37961 $16.11 | Carburetor Stud Kit, Fits carbs. with 1/2" thick flange base with a 2" spacer or with three or four 1/2" thick spacers, 5/16" -18 and 24 x 3-1/2" long |
|
Import Sport Compact Oil Pan Stud Kits • Steel studs allow repeated R&R of pan without stripping blocks • Simplifies pan installation and extends gasket life • Studs have an Allen Head socket at one end to facilitate installation • Lock nuts feature attached washers with serrated faces • Studs finished with black oxide and nuts are cadmium and zinc plated to resist corrosion |
| PART # | DESCRIPTION |
| 38356 $45.79 | Oil Pan Stud Kit, 8mm. Fits Toyota 2TC, 3TC, 2TG, 3TG and others; includes 20 studs and nuts, M8 x 1.25 x 35mm. |
| 38366 $47.13 | Oil Pan Stud Kit, 6mm. Fits Honda, Acura, Mazda Rotary, Dodge Neon, Toyota MR2 and others; includes 22 studs and nuts, M6 x 1.00 x 35mm. |
|
. These stud kits make pan installation easy and prolong gasket
life . Lock nuts feature attached washers with serrated faces to provide a positive grip on the pan rail . Studs are made of heat treated Grade 8 steel with black oxide finish; nuts are cadmium and zinc-plated . Highly recommended for use with our fabricated pans |
| PART # | DESCRIPTION |
| 38350 $36.26 | Oil Pan Stud Kit, Small Block and 90° V6 Chevy and Oldsmobile V8, Set of 18 |
| 38360 $39.10 | Oil Pan Stud Kit, Big Block Chevy and Pontiac V8, Set of 22 |
|
• For installing a Moroso or other brand billet aluminum
or steel fabricated oil pans on a GM LS engine • Designed to make pan installation easy and prolong gasket life • Lock nuts feature attached washers with serrated faces to provide a positive grip on the pan rail • Studs are made from heat-treated Grade 8 steel with a durable finish, nuts are zinc plated • Part No. 38541 $29.51 for fabricated steel oil pans, contains; Quantity 13, 8mm x 1.25 x 40mm studs with matching nuts Quantity 2, 6mm x 1 x 40mm studs with matching nuts • Part No. 38542 $29.51 for fabricated aluminum oil pans, contains; Quantity 13, 8mm x 1.25 x 45mm studs with matching nuts Quantity 2, 6mm x 1 x 50mm studs with matching nuts |
| PART # | DESCRIPTION |
| 38541 $29.51 | Oil Pan Stud Kit, for Steel Fabricated GM LS oil pans |
| 38542 $29.51 | Oil Pan Stud Kit, for Aluminum, Fabricated GM LS oil pans |
|
OIL PAN FASTENER KIT Fits: Big Block Chevy Race Pans • For use with Moroso Oil Pan Numbers 20370, 20371, 20385, 21600, 21601, 20372, 20373, 20374, 20375, 20376, 20378, 20380, 20485, 21581, 21591, 21592, 21597, 21602, 21604, and 21605. • Studs and 12 point nuts to fasten all BBC/DRC/Merlin/CN blocks wet sump and dry sump oil pans • Studs are made of heat treated Grade 8 steel with black oxide finish • Makes installing the nuts through the access bungs easy with bullet nose studs and makes initial line up easier with studs on all bolt holes |
| PART # | DESCRIPTION |
| 38361 $52.58 | Oil Pan Fastener Kit, BBC Race Pans |
|
• "Bullet Nose" Studs are rounded on one end for
easier starting of oil pan mounting nuts • Kits include heat treated Grade 8 steel studs with a black oxide finish, and special-design nuts |
| PART # | DESCRIPTION |
| 38385 $83.59 | Bullet Nose Oil Pan Stud Kit, specially designed for Moroso Aluminum Oil Pans no. 21234, and includes six studs with 12-point nuts for the pan rail and four longer studs with Allen Head nuts for the investment-cast end caps found on Moroso’s innovative line of oil pans |
| 38387 $25.57 | Bullet Nose Oil Pan Stud Kit, specially designed for Moroso Aluminum Oil Pans nos. 21581, and 21592, includes 6 studs and serrated nuts for pan rails, and 2 each, socket head cap screws for the timing cover and rear pan rail area |
| 38390 $98.46 | Bullet Nose Oil Pan Stud Kit, for Small and Big Block Ford Engines, special nuts included to fit flat against pan rail on tight corners, use with Moroso Oil Pan nos. 20502, 20507, 20508, 20510, and 20521, 23 to a kit |
|
. Popular size nuts, no. 97036, is used in Part no. 38361, Oil
Pan Fastener Kit . No. 97037, is used in Part nos. 38360, & 38390. |
| PART # | DESCRIPTION |
| 97036 $6.52 | Nuts, 5/16"-24", 25 Pack , Washer Face Serrated |
| 97037 $6.36 | Nuts, 1/4"-28", 20 Pack , Washer Face Serrated |
| PART # | DESCRIPTION |
| 38550 $11.99 | Self-Locking Oil Pan Bolts, Small Block and 90° V6 Chevy and Oldsmobile V8’s, For One-Piece Gaskets, Fourteen ¼"-20 x 3/4" and Four 5/16"-18 x 3/4" bolts |
| 38555 $11.99 | Self-Locking Oil Pan Bolts, Small Block and 90° V6 Chevy and Oldsmobile V8’s, For Multi-piece Gaskets, Fourteen ¼"-20 x 1/2" and Four 5/16"-18 x 3/4" bolts |
| 38560 $17.36 | Self-Locking Oil Pan Bolts, Big Block Chevy and Pontiac V8’s, For One piece and Multi-piece Gaskets, Twenty 5/16"-18 x ½" bolts and Two ¼"-20 x 3/4" bolts |
|
OIL PAN FLANGE HEAD BOLTS Fits: Small Block Chevy Oil Pans . For use with Moroso Oil Pan nos. 20173, 20175, 20183, 20184, and 20186. . Fasteners are short enough to fit in kick-out style oil pans . Economical alternative to stud kits . 12 point flange head, black, grade 8 . 18 to a set; 4 of 5/16-18 x .75", 14 of 1/4-20 x 3/4" |
| PART # | DESCRIPTION |
| 38551 $13.31 | Oil Pan Flange Head Bolts, SBC |
|
. 3/8" diameter, 12-point headed intake manifold bolts simplify
the job of installing and removing many of todayfs aftermarket
intake manifolds designed with extremely tight fastener clearances . Kits are manufactured of Grade 8 steel and come complete with close-tolerance washers |
| PART # | DESCRIPTION |
| 38400 $24.14 | Intake Manifold Bolt Kit, SBC and 90° Chevy V6, and Small Block Chrysler with single plane manifold, set of 12; 3/8" -16 x 1-1/8" |
| 38410 $40.35 | Intake Manifold Bolt Kit, BBC, set of 16; 3/8" -16 x 1-1/4" |
| 38420 $40.45 | Intake Manifold Bolt Kit, BBC, set of 12; 3/8" -16 x 1-1/4" and set of 4 of 3/8" -16 x 1-3/4" |
|
. 1/4" -20 hex head timing cover bolts manufactured of cadmium-plated
Grade 8 steel . Integral serrated washer face insures positive locking against the timing cover . Ten per package |
| PART # | DESCRIPTION |
| 38590 $7.61 | Timing Cover Bolts, Small Block, Big Block and 90° V6 Chevy |
|
. Grade 8 header bolts are heat treated with black oxide finish . Uses 7/16" hex head for quick installation and removal of headers |
| PART # | DESCRIPTION |
| 38710 $14.81 | Header Bolts, 3/8" -16 x 3/4" hex head bolts for SBC, BBC and 90° V6 Chevy engines, Small Block Ford and other engines where a 3/8" -16 bolt is used, pack of 16 |
| . Specially designed fasteners provide maximum holding strength and eliminate the possibility of shearing |
| PART # | DESCRIPTION |
| 38764 $10.40 | Torque Converter Bolts, Grade 8 bolts with nuts for Turbo 350, 400 flex plates without tapped holes, 3/8" -24 x 5/8". Three per pack. |
| 38765 $9.96 | Torque Converter Bolts, Grade 5 bolts for Turbo 350, 400 flex plates with tapped holes, 3/8" -16 x 5/8". Three per pack |
|
ULTIMATE-DUTY BALANCER BOLT KITS . Extra-strength chrome moly steel bolt with large, built-in washer flange exerts 200,000 psi of clamping force to secure balancer firmly in place under severe conditions . Unlike other brands, the bolt is machined and thread rolled after heat treating for superior strength, accuracy and longevity . Extra-tall 12-point head accepts deep 5/8" socket to provide positive grip for removal/installation without stripping . Large, 2" diameter washer is .275" thick and machined perfectly flat to spread the fastening load over a larger surface area . Black oxide finish |
| PART # | DESCRIPTION |
| 38772 $40.41 |
Ultimate-Duty Balancer Bolt Kit, SBC, 7/16" -20 threads |
| 38775 $40.41 | Ultimate-Duty Balancer Bolt Kit, BBC, 1/2" -20 threads |
|
. The thicker 3/4" hex head on this 7/16"-20 x 2-1/4"
balancer bolt provides a larger contact surface for increased
positive socket engagement . Especially important when crankshaft is being rotated by hand with the use of a socket and breaker bar or ratchet handle . Manufactured of Grade 8 steel with gold iridite finish |
| PART # | DESCRIPTION |
| 38770 $10.65 | Balancer Bolt, Small Block Chevy |
|
. Bolts manufactured using Grade 8 steel and heat treated for
maximum strength . Black oxide finish provides corrosion resistance |
| PART # | DESCRIPTION |
| 38755 $26.84 | Flywheel Bolts, 12-point, manufactured of special high strength steel alloy for use in Chevrolet V8 and 90° V6 engines on flywheels with a counter-sunk crankshaft flange, Black oxide finish, Each package has six 7/16"-20 x 1" bolts |
| 38760 $14.80 | Flex Plate Bolts, SBC, BBC and 90° Chevy V6 engines, 7/16"-20 x 3/4", Each package has 6 bolts and washers |
|
. Black, thermoplastic grommets will fit five different size
holes for wires and cables passing through the firewall . They not only insulate, but provide mechanical protection against chafing . Outside dimensions range from 1/2" to 1", the inside from .41" to .89" . Package of 25; five of each size |
| PART # | DESCRIPTION |
| 39050 $18.81 | Firewall Grommets |
|
. Set consists of two 3/8" diameter pins with all necessary
mounting hardware . Pins are manufactured from high strength aluminum alloy . We recommend 6 to 8 per hood |
| PART # | DESCRIPTION |
| 39000 $16.13 | Hood Pin Set |
| PART # | AVAILABLE OPTION |
| 39025 $20.05 | Hood Pin Bracket, 3/8" Diameter Pins |
|
HOOD PIN SET, ALUMINUM, BLACK ½" Diameter Pins • Set consists of two ½" diameter pins with all necessary mounting hardware • The included pins and scuff plates have a black finish, the clips have a chrome plated finish • Pins are manufactured from high strength aluminum alloy |
| PART # | DESCRIPTION |
| 39005 $16.13 | Hood Pin Set, Aluminum, 1/2", Black |
|
. A quick, self-contained hood clamping device . No pins or lanyards to lose or cause hood damage . We recommend 6 to 8 to a hood . 3/8" diameter aluminum pins; easy bolt-on installation may be used or many other applications where quick access to a trouble spot is absolutely essential . Two per set |
| PART # | DESCRIPTION |
| 39010 $24.18 | Quick Release Hood Pin Set |
| PART # | AVAILABLE OPTION |
| 39025 $20.05 | Hood Pin Bracket, 3/8" Diameter Pins |
|
. Compact and lightweight Hood Pin Sets consist of 3/8"
dia. chrome plated steel pins with clips, 1-1/2" dia. stainless
steel scuff plates and vinyl-coated stainless steel lanyards . Available in 3" and 4" pin lengths . Ideal for any full-bodied race cars . Two per set |
| PART # | DESCRIPTION |
| 39015 $39.03 | Oval Track Hood Pin Set, 3" |
| 39016 $41.66 | Oval Track Hood Pin Set, 4" |
| PART # | REPLACEMENT PARTS |
| 39022 $13.32 | Hood Pin Clips, 1/8" wire dia., chrome plated, two per set |
| 39023 $4.77 | Hood Pin Scuff Plates, 2-1/2" dia., chrome plated, two per set |
| PART # | AVAILABLE OPTION |
| 39025 $20.05 | Hood Pin Bracket, 3/8" Diameter Pins |
| . Hood Pin Sets consist of two chrome plated steel hood pins (5" long with 3" of thread), two 1/8" hitch pins, four cadmiumplated mounting nuts, two scuff plates, two 12" vinyl-coated stainless steel lanyards and two rivet eyelets |
| PART # | DESCRIPTION |
| 39020 $32.32 | Heavy-Duty Hood Pin Set, 1/2" dia. pins |
| 39021 $41.70 | Standard-Duty Hood Pin Set, 7/16" dia. hood pins |
| PART # | REPLACEMENT PARTS |
| 39022 $13.32 | Hood Pin Clips, 1/8" wire dia., chrome plated, two per set |
| 39023 $4.77 | Hood Pin Scuff Plates, 2-1/2" dia., chrome plated, two per set |
|
• Makes mounting and aligning a 3/8" Diameter hood
pin easier than previous methods • Made out of 1/8" thick Stainless Steel • Can be bolted and/or welded into place • Finish of the bracket can be painted, polished or left as is |
| PART # | DESCRIPTION |
| 39025 $20.05 | Hood Pin Bracket, 3/8" Diameter Pins |
|
QUICK FASTENERS, 5/16”, 7/16” • Fasteners Provide Quick Fastening Of Body Panels, Door, Tilt Front Ends, Fiberglass To Metal, Metal To Metal, Etc. • Ten Per Package • Use with Spring nos. 71400, 71410, 71420, 71425, or 71430. |
| Style of Head | Size | Body | Mater- ial | Finish | Part # |
| Flush Head, Slotted | 5/16" | .400" Short Body | Steel | Silver | 71291 $30.85 |
| Flush Head, Slotted | 5/16" | .400" Short Body | Alum. | Alum. | 71295 $33.68 |
| Flush Head, Slotted | 5/16" | .450" Short Body | Steel | Silver | 71293 $30.85 |
| Flush Head, Slotted | 5/16" | .450" Short Body | Alum. | Alum. | 71296 $33.64 |
| Flush Head, Slotted | 5/16" | .500" Medium Body | Steel | Silver | 71294 $30.90 |
| Flush Head, Slotted | 5/16" | .500" Medium Body | Alum. | Alum. | 71297 $33.64 |
| Flush Head, Slotted | 5/16" | .550" Long Body | Steel | Silver | 71299 $30.85 |
| Flush Head, Slotted | 5/16" | .550" Long Body | Alum. | Alum. | 71298 $28.59 |
| Flush Head, Slotted | 7/16" | .400" Short Body | Steel | Silver | 71280 $51.12 |
| Flush Head, Slotted | 7/16" | .400" Short Body | Alum. | Alum. | 71302 $49.76 |
| Flush Head, Slotted | 7/16" | .450" Short Body | Steel | Silver | 71290 $51.12 |
| Flush Head, Slotted | 7/16" | .450" Short Body | Alum. | Alum. | 71312 $49.90 |
| Flush Head, Slotted | 7/16" | .500" Medium Body | Steel | Silver | 71300 $33.68 |
| Flush Head, Slotted | 7/16" | .500" Medium Body | Alum. | Alum. | 71301 $33.68 |
| Flush Head, Slotted | 7/16" | .550" Long Body | Steel | Silver | 71310 $43.01 |
| Flush Head, Slotted | 7/16" | .550" Long Body | Alum. | Alum. | 71311 $35.02 |
| Oval Head, Slotted | 5/16" | .300" Short Body, Undercut | Steel | Silver | 71341* |
| Oval Head, Slotted | 5/16" | .400" Short Body, Undercut | Steel | Silver | 71340* |
| Oval Head, Slotted | 5/16" | .400" Short Body | Alum. | Alum. | 71329 $33.60 |
| Oval Head, Slotted | 5/16" | .450" Short Body | Steel | Silver | 71325 $30.85 |
| Oval Head, Slotted | 5/16" | .450" Short Body | Alum. | Alum. | 71330 $33.64 |
| Oval Head, Slotted | 5/16" | .450" Short Body | Alum. | Black | 71327 $36.29 |
| Oval Head, Slotted | 5/16" | .500" Medium Body | Steel | Silver | 71345 $29.61 |
| Oval Head, Slotted | 5/16" | .500" Medium Body | Steel | Black | 71346 $36.27 |
| Oval Head, Slotted | 5/16" | .500" Medium Body | Alum. | Alum. | 71331 $33.60 |
| Oval Head, Slotted | 5/16" | .500" Medium Body | Alum. | Black | 71333 $37.60 |
| Oval Head, Slotted | 5/16" | .550" Long Body | Alum. | Alum. | 71332 $33.68 |
| Oval Head, Slotted | 7/16" | .400" Short Body | Steel | Silver | 71349 $49.76 |
| Oval Head, Slotted | 7/16" | .400" Short Body | Alum. | Alum. | 71353 $49.76 |
| Oval Head, Slotted | 7/16" | .450" Short Body | Steel | Silver | 71359 $49.90 |
| Oval Head, Slotted | 7/16" | .450" Short Body | Steel | Black | 71358 $49.90 |
| Oval Head, Slotted | 7/16" | .450" Short Body | Alum. | Alum. | 71363 $49.76 |
| Oval Head, Slotted | 7/16" | .450" Short Body | Alum. | Black | 71365 $51.25 |
| Oval Head, Slotted | 7/16" | .500" Medium Body | Steel | Silver | 71350 $33.56 |
| Oval Head, Slotted | 7/16" | .500" Medium Body | Steel | Black | 71354 $39.08 |
| Oval Head, Slotted | 7/16" | .500" Medium Body | Alum. | Alum. | 71351 $33.64 |
| Oval Head, Slotted | 7/16" | .500" Medium Body | Alum. | Black | 71355 $36.40 |
| Oval Head, Slotted | 7/16" | .550" Long Body | Steel | Silver | 71360 $36.33 |
| Oval Head, Slotted | 7/16" | .550" Long Body | Alum. | Alum. | 71361 $34.98 |
| Oval Head, Slotted | 7/16" | .550" Long Body | Alum. | Black | 71364 $51.25 |
| Oval Head, 3/16" Hex Drive | 7/16" | .400" Short Body | Steel | Silver | 71274 $33.64 |
| Oval Head, 3/16" Hex Drive | 7/16" | .450" Short Body | Steel | Silver | 71275 $33.64 |
| Oval Head, 3/16" Hex Drive | 7/16" | .500" Medium Body | Steel | Silver | 71352 $33.64 |
| Oval Head, 3/16" Hex Drive | 7/16" | .500" Medium Body | Alum. | Black | 71356 $39.00 |
| Oval Head, 3/16" Hex Drive | 7/16" | .550" Long Body | Steel | Silver | 71362 $34.98 |
| Butterfy Head | 5/16" | .400" Short Body | Steel | Silver | 71276 $49.90 |
| Butterfy Head | 5/16" | .450" Short Body | Steel | Silver | 71277 $49.90 |
| Butterfy Head | 5/16" | .500" Medium Body | Steel | Silver | 71278 $52.57 |
| Butterfy Head | 5/16" | .550" Long Body | Steel | Silver | 71279 $49.90 |
| Butterfy Head | 7/16" | .400" Short Body | Steel | Silver | 71260 $55.23 |
| Butterfy Head | 7/16" | .450" Short Body | Steel | Silver | 71270 $52.57 |
| Butterfy Head | 7/16" | .500" Medium Body | Steel | Silver | 71271 $49.90 |
| Butterfy Head | 7/16" | .550" Long Body | Steel | Silver | 71272 $49.90 |
| * Use with Fastener Spring nos. 71425, and 71430. | |||||
|
SELF-EJECTING QUICK FASTENERS, 5/16” • These Spring Loaded Buttons Guarantee A Quick Release • The spring holds the button captive so that it can't be dropped underneath the car or into some hard-to-get-at area of the chassis • A necessity for quick pit work in racing • Use Spring no. 71430 $14.76 as a replacement • Ten per package. |
| Style of Head | Size | Body & Grip Range | Mater- ial | Finish | Part # |
| Flush Head, Slotted | 5/16" | .400" Short Body, .098" to .133" | Steel | Silver | 71440 $56.54 |
| Flush Head, Slotted | 5/16" | .400" Short Body, .098" to .133" | Alum. | Black | 71441 $60.63 |
| Flush Head, Slotted | 5/16" | .450" Short Body, .148" to .183" | Steel | Silver | 71450 $56.54 |
| Flush Head, Slotted | 5/16" | .450" Short Body, .148" to .183" | Alum. | Black | 71451 $60.63 |
| Flush Head, Slotted | 5/16" | .500" Medium Body, .198" to .233" | Steel | Silver | 71500 $53.95 |
| Flush Head, Slotted | 5/16" | .500" Medium Body, .198" to .233" | Alum. | Alum. | 71501 $56.61 |
| Flush Head, Slotted | 5/16" | .500" Medium Body, .198" to .233" | Alum. | Black | 71502 $60.62 |
| Flush Head, Slotted | 5/16" | .550" Long Body, .250" to .325" | Steel | Silver | 71505 $52.60 |
| Flush Head, Slotted | 5/16" | .550" Long Body, .250" to .325" | Alum. | Alum. | 71506 $55.30 |
| Flush Head, Slotted | 5/16" | .550" Long Body, .250" to .325" | Alum. | Black | 71507 $60.63 |
| Flush Head, Slotted | 5/16" | .650" Long Body, .348" to .383" | Steel | Silver | 71530 $55.17 |
| Flush Head, Slotted | 5/16" | .650" Long Body, .348" to .383" | Alum. | Alum. | 71531 $55.30 |
| Flush Head, Slotted | 5/16" | .650" Long Body, .348" to .383" | Alum. | Black | 71532 $60.63 |
| Butterfy Head | 5/16" | .400" Short Body, .098" to .133" | Steel | Silver | 71460 $67.41 |
| Butterfy Head | 5/16" | .450" Short Body, .148" to .183" | Steel | Silver | 71470 $67.31 |
| Butterfy Head | 5/16" | .500" Medium Body, .198" to .233" | Steel | Silver | 71510 $63.29 |
| Butterfy Head | 5/16" | .650" long body, .348" to .383" | Steel | Silver | 71540 $61.95 |
|
LARGE hEAD SELF-EJECTING QUICK FASTENERS, 7/16” • Heavy duty to allow repeated use with a fastener tool allen wrench or a ratchet without stripping • A Larger size distributes the load over a larger area to avoid pull-through • The spring holds the button captive so that it can't be dropped underneath the car or into some hard-to-get-at area of the chassis • A necessity for quick pit work in racing • Use Spring Nos. 71400, 71410, 71420, 71425, or 71430 $14.76 • Ten per package |
| style of Head | size | Body & Grip range | Mater- ial | Finish | Part # |
| Large Flush Head, Slotted | 7/16" | .500" Medium Body, .198" to .233" | Steel | Silver | 71370 $59.20 |
| Large Flush Head, Slotted | 7/16" | .500" Medium Body, .198" to .233" | Steel | Gold | 71371 $52.60 |
| Large Flush Head, Slotted | 7/16" | .500" Medium Body, .198" to .233" | Steel | Black | 71372 $61.94 |
| Large Flush Head, Slotted | 7/16" | .500" Medium Body, .198" to .233" | Alum. | Alum. | 71373 $59.20 |
| Large Flush Head, Slotted | 7/16" | .550" Long Body, .250" to .325" | Steel | Silver | 71375 $59.20 |
| Large Flush Head, Slotted | 7/16" | .550" Long Body, .250" to .325" | Steel | Gold | 71376 $52.52 |
| Large Flush Head, Slotted | 7/16" | .550" Long Body, .250" to .325" | Steel | Black | 71377 $61.94 |
| Large Flush Head, Slotted | 7/16" | .550" Long Body, .250" to .325" | Alum. | Alum. | 71378 $59.20 |
| Large Flush Head, Slotted | 7/16" | .550" Long Body, .250" to .325" | Alum. | Black | 71379 $64.60 |
| Large Flush Head, 3/16" Hex Drive | 7/16" | .500" Medium Body, .198" to .233" | Steel | Silver | 71380 $52.56 |
| Large Flush Head, 3/16" Hex Drive | 7/16" | .500" Medium Body, .198" to .233" | Steel | Gold | 71381 $51.25 |
| Large Flush Head, 3/16" Hex Drive | 7/16" | .550" Long Body, .250" to .325" | Steel | Silver | 71382 $52.52 |
| Large Flush Head, 3/16" Hex Drive | 7/16" | .550" Long Body, .250" to .325" | Steel | Gold | 71383 $51.11 |
|
.• Designed for use with Moroso’s flush, oval head
and butterfly fasteners • Ten per package • Determine (C) TOTAL THICKNESS of panels being joined (including space in between if any) • Select the appropriate (A) BODY LENGTH and SPRING HEIGHT (B) combination to provide the desired thickness range |
| Part # | Wire Dia. |
B Spring Height |
A Body Lenth .400" Body |
.450" Body | .500" Body | .550" Body | .650" Body |
| 1" springs | C Total Material Thickness Range | ||||||
| 71425 $13.50 | .080" | (.250") | .165 - .200" | .215 - .250" | .265 - .300" | .315 - .350" | .365 - .400" |
| 71430 $14.76 | .080" | (.325") | .098 - .133" | .148 - .183" | .198 - .233" | .248 - .283" | .348 - .383" |
| 1- 3/8" springs | |||||||
| 71420 $17.52 | .090" | (.325") | .105 - .148" | .155 - .198" | .205 - .248" | .255 - .298" | .355 - .398" |
| 71410 $14.76 | .090" | (.375") | .055 - .098" | .105 - .148" | .155 - .198" | .205 - .248" | .305 - .348" |
| 71400 $14.80 | .090" | (.425") | .005 - .048" | .055 - .098" | .105 - .148" | .155 - .198" | .255 - .298" |
|
REINFORCING PLATES / MOUNTING BRACKETS QUICK FASTENER REINFORCING PLATES • Reinforcement plates provide a secure metal backing for long lasting service • Solves the problem of quick release fastener attachment rivets pulling out of fiberglass hood and body panels after repeated usage • Also prevents fastener spring brackets from cutting into body panels • Use with Quick Fastener nos. 71280, 71290, 71300, 71310, 71350, or 71360. • Ten per package |
| PART # | DESCRIPTION |
| 71490 $13.30 | Quick Fastener Reinforcing Plates, .022" Thick |
|
LARGE DIAMETER QUICK FASTENER REINFORCING PLATES . Large 1-3/4" diameter aluminum reinforcement plates provide a sure foundation for quick fasteners . Use them on thin gauge fiberglass and metal . Ten per package |
| PART # | DESCRIPTION |
| 71495 $10.62 | Large Diameter Quick Fastener Reinforcing Plates, .032" thick |
|
For Self-Eject Fasteners . Brackets can be welded or fastened to any member of the car to provide a convenient pop rivet mount for self-ejecting fastener springs . Use with nos. 71340, 71345, 71430, 71425, 71440, 71450, 71460, 71470, 71500, 71510, 71530, or 71540. |
| PART # | DESCRIPTION |
| 71550 $10.71 | Quick Fastener Mounting Bracket, Steel, Ten per pack,Use with nos. 71430, or 71425, springs, .062" thick |
| 71551 $14.65 | Quick Fastener Mounting Bracket, Steel, Ten per pack, .059" thick, accepts 1" or 1.375" springs, Flat |
| 71552 $29.61 | Quick Fastener Mounting Bracket, same as no. 71551 $14.65 except bent at 90¡Æ angle for mounting to firewalls, frame tubes, etc. Ten per pack, .059" thick, accepts 1" or 1.375" springs |
| 71553 $13.32 | Quick Fastener Mounting Bracket, Steel, Lightweight 45¢ª, accepts 1" springs, Ten per pack, .069" thick |
| 71555 $13.41 | Quick Fastener Mounting Bracket, Use these steel brackets anywhere a strong mounting tab is needed for a neat installation, e.g., hood mounts, panel mounts, accessory mounts, etc. Can be used with Heat Shield Kit no. 68572 when mounting to steel valve covers, Two per pack, .100" thick |
| 71556 $12.02 | Quick Fastener Mounting Bracket, Same as no. 71555 $13.41 in Aluminum, Two per pack, .100" thick |
|
For Standard & Self-Eject Fasteners • Steel bracket can be welded or fastened to any member of the car to provide a convenient pop rivet mount for fastener springs • Use with nos. 71301, 71311, 71351, 71361, 71352, 71362, 71371, 71376, 71380,71381, 71382, or 71383. • Ten per package |
| PART # | REPLACEMENT PARTS |
| 71554 $13.32 | Quick Fastener Mounting Bracket, .069" thick, accepts 1.375" springs, dimpled, standard fasteners |
| 71557 $13.32 | Quick Fastener Mounting Bracket, .060" thick, accepts 1.375" springs, dimpled, Self E-ject fasteners |
|
QUICK FASTENER MOUNTING BRACKET, ALUMIMUM 7/16” FASTENERS For Standard Fasteners • Aluminum bracket can be welded or fastened to any member of the car to provide a convenient pop rivet mount for standard fastener springs • Use with Moroso nos. 71370, 71371, 71372, 71375, 71376, 71377, 71380, 71381, 71382, or 71383. • Ten per package |
| PART # | DESCRIPTION |
| 71559 $16.04 | Quick Fastener Mounting Bracket, Aluminum, .120" thick, for 7/16" Fasteners & 1-3/8" Springs |
|
QUICK FASTENER WASHERS • One of these tough Teflon washers under each quick fastener willprotect your car’s finish from otherwise hard-to-prevent scratches • A must for the conscientious car owner • Package of 25 • Fits all quick fasteners |
| PART # | DESCRIPTION |
| 71610 $7.92 | Quick Fastener Washers |
|
. This tool fits slot-head 1/4-turn fasteners far better than
a screwdriver, reducing the possibility of damaged fasteners
and body panels . Manufactured of zinc plated spring steel with three different sized radii to match the slots in various 1/4-turn fasteners . Includes non-slip, plastic hand grip . One tool per pack |
| PART # | DESCRIPTION |
| 71600 $8.84 | Quick Fastener Wrench |
|
With Easy Grip Handles . Allows for faster removal of 1/4-turn fasteners . Features include a high strength steel shank plated with black zinc for durability . The slot head blade on no. 71606 $28.24 is contoured to fit inside the 1/  4-turn
fastener without stripping the slot. One per package |
| PART # | DESCRIPTION |
| 71606 $28.24 | Quick Fastener Wrench, 3/8" Slot Head |
| 71607 $25.54 | Quick Fastener Wrench, 3/16" Hex Drive |
|
• Ideal for sinking flush-mount quick fasteners • The two piece steel tool dimples a single metal panel using one end and a double panel using the other • Zinc-plated • One tool per package |
| PART # | DESCRIPTION |
| 71605 $56.61 | Quick Fastener Sinking Tool |
|
Place the Transfer Stud Punch in a weld plate or body panel.
Then position your panel over top of it and lightly tap the panel
with a hammer and you’ll be left with a mark in your panel
where you drill your hole • 5 per pack |
| PART # | DESCRIPTION |
| 71601 $18.79 | Transfer Stud Punch Kit for 5/16" Buttons, 5 per kit |
| 71602 $18.79 | Transfer Stud Punch Kit for 7/16" Buttons, 5 per kit |
|
CAM STOP BUTTONS • Professional engine builders are familiar with camshaft "walk" — when excessive end play produces erratic spark timing and the timing chain/gear "eats" the timing cover • Moroso solves the problem with a highly wear resistant button mounted in an aluminum holder and bolted to the cam timing gear by way of a retaining plate • The button assembly does not allow the cam to "walk" forward, stabilizing ignition timing and preventing costly engine repair |
| PART # | DESCRIPTION |
| 60460 $21.41 | Cam Stop Button and Retaining Plate, SBC and 90° V6 Chevy with early ribbed style timing cover, Cam bolts included |
| 60461 $21.41 | Cam Stop Button and Retaining Plate, SBC and 90° V6 Chevy with late style flat timing cover, Cam bolts included |
| 60462 $21.41 | Cam Stop Button and Retaining Plate, BBC, Cam bolts included |
|
. Donft let a broken camshaft bolt ruin your motor! . Hex head 5/16"-18 camshaft bolts are manufactured from tough Grade 8 steel with a black oxide finish . Three per pack; includes retaining plate . Should be used with Cam Stop Button nos. 60460, 60461, and 60462, shown above |
| PART # | DESCRIPTION |
| 60464 $6.06 | Chevy Camshaft Bolts with Retainer |
|
Heavy-Duty, Aircraft Quality • These "T" handled quick release pins offer the racer the ultimate in quick release fastening • Supplied in all popular sizes • Two per package |
| Part # | Description |
| 90380 $41.76 | Quick Release Pins, 1/4" dia. x 1" long, Double shear load of 9,200 lbs. when properly mounted |
| 90390 $44.44 | 1 Quick Release Pins, 1/4" dia. x 1- 1/2" long, Double shear load of 9,200 lbs. when properly mounted |
| 90395 $48.53 | Quick Release Pins, Double shear load of 9,200 lbs. when properly mounted |
| 90400 $43.05 | Quick Release Pins, 5/16" dia. x 1" long, Double shear load of 14,400 lbs. when properly mounted |
| 90401 $75.47 | Quick Release Pins, 5/16" dia. x 1- 1/2" long, Double shear load of 12,800 lbs, when properly mounted |
| 90402 $55.23 | Quick Release Pins, 5/16" dia. x 2" long, Double shear load of 14,400 lbs. when properly mounted |
| 90404 $57.97 | 5 Quick Release Pins, 5/16" dia. x 3" long, Double shear load of 14,400 lbs. when properly mounted |
| 90410 $43.11 | Quick Release Pins, 3/8" dia. x 1" long, Double shear load of 20,600 lbs. when properly mounted |
| 90415 $68.76 | Quick Release Pins, 3/8" dia. x 1- 1/2" long, Double shear load of 18,400 lbs. when properly mounted |
| 90420 $56.57 | Quick Release Pins, 3/8" dia. x 2" long, Double shea rload of 20,600 lbs. when properly mounted |
| 90430 $67.45 | Quick Release Pins, 3/8" dia. x 3" long, Double shear load of 20,600 lbs. when properly mounted |
| 90440 $82.19 | Quick Release Pins, 1/2" dia. x 2- 1/2" long, Double shear load of 36,800 lbs. when properly mounted |