Wiseco Forged Racing Piston Kits - Lotus

RPM - RON'S PRECISION MACHINE, INC.
69 E. 580 N.
Santaquin, Utah 84655
1-801-754-5338 or Toll free 1-866-700-5877
Contact us anytime OR use your e-mail program and type in ron@rpmrons.com to send an e-mail with what you need

Order Form



Engine Rebuild Kit and Parts Online Catalog.

Engine Rebuild & Assembly Balancing & 
Blueprinting		 Cylinder Heads
Engine Rebuild Kits Engine Start-up Other Related Web Sites Page 1
Crankshafts Degree Cam Other Related Web Sites Page 2
Purchase warranty & Return Information About the owner of RPM Frequently Asked Questions
MASTER ENGINE REBUILD KITS & PARTS

Home


Call toll free to purchase at: 1-866-700-5877

Shelf-Stock Forged Pistons. Sold complete with pistons, rings, wrist pins and circlips. (piston kits)

  • ArmorGlide® SKIRT COATING INCREASES POWER AND REDUCES PISTON ROCK.
  • STRUTTED FORGING FOR IMPROVED STRENGTH
  • 2618 AEROSPACE ALLOY FOR SUPERIOR STRENGTH

LOTUS
Lotus 2ZZ Elise
• 1.8L 16V (also Pontiac Vibe and Toyota Celica, Sleeve bore for best results)
Wrist ins included: S549 20mm - .787 x 2.002

 Kit Part #
 Your Cost

 
Bore
mm/Inch

Over
Size

Stroke

Rod Length

Comp.
Ht. 

Head
cc's

Volume 

Gasket
Thickness 

Deck
Clearance

 Block
Height

 Comp.
Ratio

 Ringset
(Included)

 Avg.
Wt

Foot-
Note
K565M82 $838.27 82.00 3.228 Std. 3.346
85mm		 5.429
137.9mm		 1.228
31.2mm		 38.0 -16cc .020
.50mm		 .006
.15mm		 8.336
211.75mm		  8.9 8200XX $37.68 284

1
K569M82 $814.00 82.00 3.228 Std. .2cc  11.3 8200XX $37.68 319

Foot Notes (far right column)
1 - Most Wiseco Pistons have offset pins. (Pins must be offset, same as OEM, for quietest operation).

1. Most Wiseco pistons have offset pins. Pins must be offset same as o.e. for quitest operation-pin offset will be opposite of direction of engine rotation
* Always run at least .030 piston to head clearance including gasket thickness.
* Always check piston to valve clearance - If using VTEC or like mechanisms-check w/ longer duration higher lift lobe.
* Some pistons are listed with a range of compression ratio's. The low number is determined w/ an un-cut deck and the higher number is determined w/ .030 piston to cylinder head clearance.

Top of Page

HOME