From Start To Finish
Page 3
| CVR High Performance Automotive Racing Products Catalog |
| Cooling System Components, Water Pumps, Mounting Kits, Universal Manifolds, Remote Flange Kit, SBC, BBC, Chrysler, GM LT-1, Billet Inlet Fittings, Backing Plates, Holden Water Pump Mounting kit, Repair Kits, Electrical Accessories, Vacuum Pumps, Vacuum Resevoirs, Accessory Drive Kits, Bellet Belt Tensioner & other parts. |
RPM - RON'S PRECISION MACHINE, INC.
69 E. 580 N.
Santaquin, Utah 84655
1-801-754-5338 or Toll free 1-866-700-5877
|
| Engine Rebuild Kit and Parts Online Catalog. |
PERFORMANCE
From Start To Finish
Page 3
| Part # | Applications | Flow Rate | Weight | Colors | Avail- able ** |
| 8003CL $358.43 ** | Universal inline remote mount | 28 GPM | 6.5 lbs. | BK, CL | |
| 8400CL $641.78 ** | Chevy LS small block | 55 GPM | 9.9 lbs | BK, CL | |
| 8502CL $437.97 ** | Ford 289/302/351 | 55 GPM | 6.8 lbs. | BK, BL, CL | |
| 8508CL $475.29 ** | Holden 308 | 55 GPM | 7.8 lbs | BK, CL | |
| 8550CL $436.40 ** | Chevy small block | 55 GPM | 7.1 lbs | BK, CL, R | |
| 8554CL $436.40 ** | Chevy big block | 55 GPM | 7.4 lbs. | BK, CL, R | |
| 8560CL $457.32 ** | Ford 429/460 | 55 GPM | 7.2 lbs. | BK, BL, CL | |
|
** Add abbreviation after part number for color. BK = Black, BL = Blue, CL = Clear, R = Red |
|
NOTE: Back Plate When considering purchasing the Ford water pump, you will notice that CVR offers the “back plate” separately. Many of today’s race cars use a full front motor plate or a belt drive system for the cam. In the Ford engine, the front motor plate or the cam belt drive may also be used to block off the center chamber in the timing cover housing and drilled only in the one spot on each side to allow water flow back into the engine block. In this case, the back plate is an unnecessary piece and may not be needed. In all other cases a back plate will be necessary. |
Page 6
Proflo Extreme
Electric Water Pumps
Dimensions by part#
PN 8003CL $358.43 ** |
PN 8400CL $641.78 ** |
PN 8502CL $437.97 ** |
PN 8508CL $475.29 ** |
PN 8550CL $436.40 ** |
PN 8554CL $436.40 ** |
PN 8560CL $457.32 ** |
| Note: The information contained herein is based upon data which we believe to be correct and has been obtained from sources which we regard as reliable, but we assume no liability for typographical errors or omissions therein. |
Page 7
Universal Pump Assembly
One Pump Multiple Engine Combinations!
|
Fits Small Block & Big Block Chevrolet and Small Block &
Big Block Ford Want to take the pump from your Chev to your Ford? Simply order new mounting legs and you’re good to go! Want to customize your installation? Order your pump in one color, your mounting legs in another color and your inlet fitting in a third color. No other pump allows you to get creative with colors like the CVR Proflo Extreme. |
| Part # | Application |
| 8000CL $317.87 ** | Pump assembly |
| Part # | Application |
| 8001CL $80.87 ** | Universal manifold |
| Part # | Application |
| 8002CL $41.84 ** | Remote flange kit |
| Part # | Application |
| 8302CL $67.40 ** | Ford 289/302/351 |
| 8350CL $67.40 ** | Chevrolet small block |
| 8454CL $67.40 ** | Chevrolet big block |
| 8460CL $67.40 ** | Ford 429/460 |
Page 8
Proflo Maximum
Electric Water Pumps
Chevrolet Small Block / Big Block
• Carbon ceramic seal
• Cast Aluminum/Anodized T6-6061 billet aluminum
• Stainless steel shaft will not corrode
• Computer designed impeller machined from T6-6061 billet
aluminum
• Mounts easily in stock location
• Stainless Steel fasteners and hardware
• 12 Volt, 6.1 amp draw
| Part # | Applications | Flow Rate | Weight |
| 7550 $401.81 | SB Chevy - Clear anodized face | 55 GPM | 7.8 lbs. |
| 7550R $401.81 | SB Chevy - Red anodized face | 55 GPM | 7.8 lbs |
| 7554 $421.34 | BB Chevy - Clear anodized face | 55 GPM | 9.7 lbs |
| 7554R $421.34 | BB Chevy - Red anodized face | 55 GPM | 9.7 lbs. |
|
NOTE: This pump does not require inlet fitting. Unit comes with
standard 1¾” inlet. SPECIAL FEATURE: This is the only electric pump that includes an adjustable cam stop to help eliminate cam walk. Also has a mounting hole for power steering bracket. (PN 7550 $401.81 / 7550R $401.81 only). |
PN 7550 $401.81  |
PN 7554 $421.34  |
| Note: The information contained herein is based upon data which we believe to be correct and has been obtained from sources which we regard as reliable, but we assume no liability for typographical errors or omissions therein. |
Page 9
Chrysler/Dodge
• Carbon ceramic seal
• Stainless steel shaft will not corrode
• Impeller machined from T6-6061 billet aluminum
• Mounts easily in stock location
• 12 Volt, 6.1 amp draw
| Part # | Applications | Flow Rate | Weight |
| 6540 $319.32 | B/RB/HEMI 361-440 | 55 GPM | 4.0 lbs. |
| 6590 $338.79 | 5.9L Cummins | 55 GPM | 6.0 lbs. |
|
Installation: Mounts directly to stock water pump locations by
removing existing fan, pulley, plate and impeller; includes stainless
steel mounting hardware and gasket for simple installation. Benefits: Eliminates drive belt and fan to save weight and horsepower while providing maximum circulation to improve cooling efficiency during all driving conditions, especially while idling. |
|
Installation: Mounts directly to stock water pump locations by
removing existing water pump/ pulley. Replacing original belt
with approximately 7” shorter belt. 1994- 2002 Dayco Part #5080740; 2003-2009 Dayco Part #5081125. Includes stainless steel mounting hardware and gasket for simple installation. |
| Flow Rate: | 55GPM |
| Fasteners & Hardware: | Stainless Steel |
| Amperage Draw: | 6.1 Amps. |
| Voltage: | 12V |
| Type of Material: | Cast Aluminum |
| Part # | Application |
| 7540 $422.84 | B/RB/HEMI 361-440 |
| Part # | Application |
| 7426 $164.81 | B/RB/HEMI 361-440 |
|
Installation: Part # 7426. mounts directly in place of cast iron unit and accepts factory impeller housing assembly. Part # 7540. mounts directly to stock water pump locations by removing existing fan and pulley; includes stainless steel mounting hardware and gasket for simple installation. |
| Part # | Applications | Flow Rate | Weight |
| 6551 $319.32 | GM LT-1 small block | 55 GPM | 4.0 lbs. |
| Installation: On the LT-1 engine the factory pump is cam driven. Installation of this unit requires removal of the housing, disassembly and plugging of the drive hole and reinstallation. From there our unit plugs right into the housing supplied with seal and stainless fasteners. |
Page 10
Billet Thermostat Housings
O-ring sealed at the manifold
eliminating the need for a gasket.
Stainless steel hardware included.
Type of Unit: 360° Swivel Housing
Type of Finish: Machined
Special Coating: Bright Anodized
Type of Material: T6-6061 Billet Aluminum
| Part # | Applications |
| TSH3CL $61.41 | Chevrolet - Manifold filler neck |
| TSH4CL $139.44 |
Chevrolet - Manifold filler neck- 1½" hose - LH/RH |
| TSH5ACL $115.40 ** | Chevrolet LS - 16AN |
| TSH5SACL $77.94 ** | Chevrolet LS Straight - 16AN |
| TSH5CL $115.40 ** | ChevroletLS - 90º Swivel - 1½" hose |
| TSH5SCL $77.94 ** | Chevrolet LS Straight - 1½" hose |
| TSH6CL $115.40 ** | Chevrolet- 90º Swivel - 1½" hose |
| TSH6ACL $115.40 ** | Chevrolet - 90º Swivel - 16AN |
| TSH7CL $115.40 ** | Ford 289/302- 90º Swivel - 1½" hose |
| TSH68CL $110.87 ** | Holden 308 - 90º Swivel |
| TSH7ACL $115.40 ** | Ford 289/302 - 90º Swivel - 16AN |
| TSH8CL $115.40 ** | Chrysler - 90º Swivel - 1½" hose |
| TSH8SCL $77.94 ** | Chrysler Straight - 1½" hose |
| TSH8ACL $115.40 ** | Chrysler - 90º Swivel - 16AN |
| TSH8SACL $77.94 ** | Chrysler Straight - 16AN |
| TSH9CL $139.44 | Chrysler - Manifold filler neck - 1½" hose |
| TSH9ACL $139.44 | Chrysler - Manifold filler neck - 16AN |
| Part # | Description | Part # | Description |
| 8012CL $28.37 ** | 12 AN | 8150LCL $29.94 ** | 1½” - Long |
| 8016CL $28.37 ** | 16 AN | 8150TCL $23.88 ** | 1½” - Short |
| 8016LCL $29.94 ** | 16 AN - Long | 8175CL $28.37 ** | 1¾” |
| 8125CL $28.37 ** | 1¼” | 8175LCL $29.94 ** | 1¾” - Long |
| 8150CL $28.37 ** | 1½” | . | . |
| Part # | Description |
| 8180BK $125.82 | Black |
| 8180CL $125.82 | Clear |
| Part # | Description |
| WBF61 $73.44 | Big Block Chevrolet |
| WBF62 $73.44 | Small Block Chevrolet |
| Note: The information contained herein is based upon data which we believe to be correct and has been obtained from |
Page 11
Holden Mounting Kit
Holden 308 Engine
| Part # | Application |
| 8308CL $139.44 ** | Mounting kit |
| Part # | Application |
| 63512CCL $62.81 ** | 351 Cleveland - Clear & Blue only |
| 65022CL $62.81 ** | Small block Ford |
| 65602CL $62.81 ** | Big block Ford |
| Part # | Application |
| 750 $164.81 | Proflo Maximum motor and top plate for Part # 7550. |
| 754 $205.37 | Proflo Maximum motor and top plate for Part # 7554. |
| 8054 $70.35 | Proflo Extreme repair kit assembly |
| 8055CL $152.94 ** | Proflo Extreme motor and top plate |
| MA150 $131.79 | High output motor for high volume pumps |
| SK60 $37.41 | Seal only. Fits all pumps |
| SK63 $70.35 | Proflo repair kit. Fits #6302. & #6502. |
| SK64 $70.35 | Proflo repair kit. Fits #6460. & #6560. |
| SK65 $70.35 | Proflo repair kit. Fits #6350. & #6550. |
| SK66 $70.35 | Proflo repair kit. Fits #6454. & #6554. |
| SK67 $70.35 | Proflo Maximum repair kit for #7550. & #7550R. |
| SK68 $70.35 | Proflo Maximum repair kit for #7554. & #7554R. |
Page 12
12 Volt Electric Vacuum Pumps
|
For vehicles using engine combinations that provide little or
no manifold vacuum required for braking. When vacuum drops below
15 in. of vacuum the CVR Electric Vacuum Pump activates and increases
the vacuum level to 20 in. of vacuum. Complete self-contained unit. Simply connect the positive/ negative power and the unit will regulate the vacuum level itself. NOTE: Unit can be mounted in any position. |
|
GOOD! • Precision machined • Cast aluminum construction • Precision bearings and balanced crank reduce vibration drasticallycompared to most conventional diaphragm pumps • Self-contained electronics for ease of installation • 12 volt, 4 amp draw • Weight - 8.34 lbs. |
| Part # | Application |
| VP555 $403.44 | Diaphragm style |
| VP655 $451.31 | Vane style, Cast aluminum |
| VP665 $548.91 | Vane style, Billet aluminum - Black anodized |
|
BETTER! • Patent Pending Design - Superior To Anything On The Market Today • Precision machined • Cast aluminum construction • 20% less noise and vibration, similar to a performance electric fuel pump • 50% more vacuum than diaphragm style pump • Self-contained electronics for ease of installation • Built-in relay with low amperage lead can be connected straight to key switch • 12 volt, 6 amp draw • Weight - 5.5 lbs. |
|
BEST! • Patent Pending Design - Superior To Anything On The Market Today • Precision machined from T6-6061 billet aluminum • Black hard anodized for extended wear and corrosion resistance • 20% less noise and vibration, similar to a performance electric fuel pump • 50% more vacuum than diaphragm style pump • Self-contained electronics for ease of installation • Built-in relay with low amperage lead can be connected straight to key switch • 12 volt, 6 amp draw • Weight - 5.5 lbs. |
| Note: The information contained herein is based upon data which we believe to be correct and has been obtained fro |
Page 13
Dimensions by part#
PN VP655 $451.31 / VP665 $548.91
PN VP555 $403.44
Mechanical Vacuum Pump
|
• Can be used on wet or dry-sump engines • Designed with precision sealed roller bearings • 4.375” O.D. body, 5.050” from back of pump to pulley mounting flange • Precision machined from T6-6061 aluminum • Clear hard anodized for extended wear • Can be driven as high as 8000 RPM • Supplied with two -12AN fittings • Supplied with vacuum pump mounting bracket to SBC and BBC cylinder heads or any engine using a motorplate • Achieves greater vacuum sooner • Maintenance free • Weight - 4.5 lbs. |
| Part # | Application |
| VP625K $644.94 |
4 Vane Vacuum Pump Kit, Mounting Bracket Included |
Page 14
Vacuum Reservoir
CVR’s vacuum reservoir will allow you extra vacuum
for frequent stopping. Has built in check valve, vacuum
gauge as well as built-in mounting flange. Made of billet
aluminum.
Electric Vacuum Pump Components
| Part # | Application |
| VS20 $22.34 | Vacuum pump repair kit |
| VS25 $64.47 | Heavy duty replacement vacuum switch |
| VS26 $64.47 | Replacement vane & rotor for VP655, VP665 $548.91 |
| VS27 $31.37 | Replacement check valve for VP655, VP665 $548.91 |
| VS28 $41.84 | 5” Diameter V-groove pulley for VP625K $644.94 |
| VS29 $98.87 | Replacement vanes for VP625K $644.94 |
| Note: The information contained herein is based upon data which we believe to be correct and has been obtained from sources which we regard as reliable, but we assume no liability for typographical errors or omissions therein |
Page 15
Chevrolet LS Series
Accessory Drive Kits
| CVR’s LS Series Accessory Drive Kits are made from 6061-T6 billet aluminum and are an attractive solution to plain stock drive assemblies when retrofitting an LS engine into a muscle car, truck and hot rod. Our drive kits give you a clean appearance compared to some bulky aftermarket drive kits. These brackets deliver perfect belt alignment and are available in black and clear. |
| Part # | Application |
| LS200 $0.00 ** | Belt drive kit for electric water pump |
| LS300 $0.00 ** |
Belt drive kit for mechanical water pump (water pump not included) |
| Part # | Application |
| LS14 $199.32 | Billet Belt Tensioner for LS |