Wiseco Forged Racing Piston Kits - Citroeno

RPM - RON'S PRECISION MACHINE, INC.
69 E. 580 N.
Santaquin, Utah 84655
1-801-754-5338 or Toll free 1-866-700-5877
Contact us anytime 24-7

Order Form



Engine Rebuild Kit and Parts Online Catalog.

Engine Rebuild & Assembly Balancing & 
Blueprinting		 Cylinder Heads
Engine Rebuild Kits Engine Start-up Other Related Web Sites Page 1
Crankshafts Degree Cam Other Related Web Sites Page 2
Purchase warranty & Return Information About the owner of RPM Frequently Asked Questions
MASTER ENGINE REBUILD KITS & PARTS

Home


Call toll free to purchase at: 1-866-700-5877

Shelf-Stock Forged Pistons. Sold complete with pistons, rings, wrist pins and circlips. (piston kits)

  • ArmorGlide® SKIRT COATING INCREASES POWER AND REDUCES PISTON ROCK.
  • STRUTTED FORGING FOR IMPROVED STRENGTH
  • 2618 AEROSPACE ALLOY FOR SUPERIOR STRENGTH

CITROENO
Citroën Tritec 1.6L 16V 207/308/C4
• Turbo
Wrist pins included: S624 $18.78 21mm - .827 x 2.500
 Kit Part #
 Your Cost

 
Bore
mm/Inch

Over
Size

Stroke

Rod Length

Comp.
Ht. 

Head
cc's

Volume 

Gasket
Thickness 

Deck
Clearance

 Block
Height

 Comp.
Ratio

 Ringset
(Included)

 Avg.
Wt

Foot-
Note
K618M77 $753.15 77.00 3.031 Std. 3.778
85.8mm		 5.177
131.5mm		 1.043
26.5mm		 33cc

FT
 .030
.76mm		 .079
2.0mm		 8.189
208mm		  8.5 7700XX $39.02 246 1, 3
K618M775 $753.15 77.50 3.051 0.020 7750XX $39.02 250

Foot Notes (far right column)
1 - Most Wiseco Pistons have offset pins. (Pins must be offset, same as OEM, for quietest operation).
2 - Due to compression height that may protrude above the deck, it is recommended that a 1.00mm thick head gasket is used.
3 - Optional pin upgrade available.

1. Most Wiseco pistons have offset pins. Pins must be offset same as o.e. for quitest operation-pin offset will be opposite of direction of engine rotation
* Always run at least .030 piston to head clearance including gasket thickness.
* Always check piston to valve clearance - If using VTEC or like mechanisms-check w/ longer duration higher lift lobe.
* Some pistons are listed with a range of compression ratio's. The low number is determined w/ an un-cut deck and the higher number is determined w/ .030 piston to cylinder head clearance.

Top of Page

HOME