Mahle Fored Piston Kits - Ford & ohters for Street - Strip

Forged Light Weight Pistons for Street - Strip - Race

Mahle - Ford, Mopar, Hemi, Oldsmobile, Pontiac

Sport Compact - Acura, BMW, Ford, Honda, Hyundai, Mazda, Mitsubishi, Nissan, Subaru, Toyota, Volkswagen

High Performance Street Strip Race

RPM - RON'S PRECISION MACHINE, INC.
69 E. 580 N.
Santaquin, Utah 84655

1-801-754-5338 or Toll free 1-866-700-5877 Contact us anytime 24-7
Hours 9-5 Monday-Friday

Call Toll Free to Order and Purchase Parts only at: 1-866-700-5877

-----Order Form

Engine Rebuild Kit and Parts Online Catalog.

• Forged from 4032. low expansion aluminum alloy for high strength & reduced piston to wall clearance or 2618
• Forced Pin Oiling
• Precision Pin Fitting & Race Proven Round Wire Locks included
• High strength, light weight German steel wrist pins
• Low drag ring pack

SMALL BLOCK FORD FLAT TOP

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included 58cc 64cc 70cc Meas. Min Max

357 4.030 3.500 5.956 1.775 0.912 -6.5cc 489 11.0 10.3 9.6 4032. 0.500 0.0025 0.0033 930244030 $773.35

306 4.030 3.000 5.090 1.600 0.912 -6.5cc 483 9.6 9.0 8.4 2618 0.500 0.0046 0.0054
930245330 $773.35 *

308 4.040 " " " " " 488 9.6 9.0 8.4 " " " "
930245340 $773.35 *

306 4.030 " " " " " 469 9.6 9.0 8.4 4032. 0.500 0.0025 0.0033 930244130 $773.35

308 4.040 " " " " " 474 9.6 9.0 8.4 " " " " 930244140 $773.35

393 4.030 3.850 5.956 1.600 0.912 -6.5cc 483 12.0 11.2 10.5 2618 0.500 0.0046 0.0054
930245330 $773.35 *

395 4.040 " " " " " 488 12.1 11.2 10.5 " " " "
930245340 $773.35 *

393 4.030 " " " " " 469 12.0 11.2 10.5 4032. 0.500 0.0025 0.0033 930244130 $773.35

395 4.040 " " " " " 474 12.1 11.2 10.5 " " " " 930244140 $773.35

393 4.030 3.850 6.200 1.350 0.927 -6.5cc 451 12.0 11.2 10.5 2618 0.500 0.0046 0.0054
930245930 $864.33 *

393 4.030 " " " " " 438 12.0 11.2 10.5 4032. 0.500 0.0025 0.0033 930244230 $773.35

408 4.030 4.000 6.250 1.245 0.927 -6.5cc 437 12.5 11.6 10.9 2618 0.500 0.0046 0.0054
930245130 $773.35 *

410 4.040 " " " " " 440 12.5 11.6 10.9 " " " "
930245140 $773.35 *

414 4.060 " " " " " 448 12.6 11.7 11.0 " " " "
930245160 $773.35 *

408 4.030 " " " " " 424 12.5 11.6 10.9 4032. 0.500 0.0025 0.0033 930244330 $773.35

410 4.040 " " " " " 428. 12.5 11.6 10.9 " " " " 930244340 $773.35

414 4.060 " " " " " 436 12.6 11.7 11.0 " " " " 930244360 $773.35

428. 4.125 " " " " " 448 13.0 12.1 11.3 2618 0.500 0.0046 0.0054
930245225 $773.35 *

429 4.130 " " " " " 450 13.0 12.1 11.3 " " " "
930245230 $773.35 *

434 4.155 " " " " " 460 13.1 12.2 11.4 " " " "
930245255 $773.35 *

428. 4.125 " " " " " 435 13.0 12.1 11.3 4032. 0.500 0.0025 0.0033 930244425 $773.33

429 4.130 " " " " " 437 13.0 12.1 11.3 " " " " 930244430 $773.33

434 4.155 " " " " " 447 13.1 12.2 11.4 " " " " 930244455 $773.35

418 4.030 4.100 6.200 1.245 0.927 -6.5cc 437 12.8 11.9 11.1 2618 0.500 0.0046 0.0054
930245130 $773.35 *

420 4.040 " " " " " 441 12.8 11.9 11.1 " " " "
930245140 $773.35 *

425 4.060 " " " " " 448 12.9 12.0 11.2 " " " "
930245160 $773.35 *

418 4.030 " " " " " 424 12.8 11.9 11.1 4032. 0.500 0.0025 0.0033 930244330 $773.35

420 4.040 " " " " " 428. 12.8 11.9 11.1 " " " " 930244340 $773.35

425 4.060 " " " " " 436 12.9 12.0 11.2 " " " " 930244360 $773.35

438 4.125 " " " " " 448 13.3 12.3 11.5 2618 0.500 0.0046 0.0054
930245225 $773.35 *

439 $87.98 4.130 " " " " " 450 13.3 12.4 11.6 " " " "
930245230 $773.35 *

445 4.155 " " " " " 460 13.4 12.5 11.7 " " " "
930245255 $773.35 *

438 4.125 " " " " " 435 13.3 12.3 11.5 4032. 0.500 0.0025 0.0033 930244425 $773.33

439 $87.98 4.130 " " " " " 437 13.3 12.4 11.6 " " " " 930244430 $773.33

445 4.155 " " " " " 447 13.4 12.5 11.7 " " " " 930244455 $773.35

332 4.030 3.250 5.400 1.165 0.927 -6.5cc 425 10.3 9.6 9.0 2618 0.500 0.0046 0.0054
930245430 $773.35 *

333 4.040 " " " " " 429 10.4 9.7 9.0 " " " "
930245440 $773.35 *

332 4.030 " " " " " 413 10.3 9.6 9.0 4032. 0.500 0.0025 0.0033 930244530 $773.35

333 4.040 " " " " " 417 10.4 9.7 9.0 " " " " 930244540 $773.35

347 4.125 " " " " " 437 10.7 10.0 9.3 2618 0.500 0.0046 0.0054
930245525 $773.35 *

353 4.155 " " " " " 448 10.8 10.1 9.5 " " " "
930245555 $773.35 *

347 4.125 " " " " " 415 10.7 10.0 9.3 4032. 0.500 0.0025 0.0033 930244625 $773.35

353 4.155 " " " " " 426 10.8 10.1 9.5 " " " " 930244655 $773.35

426 4.030 4.170 6.250 1.165 0.927 -6.5cc 425 13.0 12.1 11.3 2618 0.500 0.0046 0.0054
930245430 $773.35 *

428. 4.040 " " " " " 429 13.0 12.1 11.3 " " " "
930245440 $773.35 *

426 4.030 " " " " " 413 13.0 12.1 11.3 4032. 0.500 0.0025 0.0033 930244530 $773.35

428. 4.040 " " " " " 417 13.0 12.1 11.3 " " " " 930244540 $773.35

446 4.125 " " " " " 437 13.5 12.5 11.7 2618 0.500 0.0046 0.0054
930245525 $773.35 *

452 4.155 " " " " " 448 13.6 12.7 11.9 " " " "
930245555 $773.35 *

446 4.125 " " " " " 415 13.5 12.5 11.7 4032. 0.500 0.0025 0.0033 930244625 $773.35

452 4.155 " " " " " 426 13.6 12.7 11.9 " " " " 930244655 $773.35

383 4.030 3.750 6.200 1.125 0.927 -6.5cc 407 11.8 10.9 10.2 4032. 0.500 0.0025 0.0033 930173130 $773.35

385 4.040 " " " " " 411 11.8 11.0 10.3 " " " " 930173140 $773.35

342 4.000 3.400 5.400 1.090R 0.927 -6.5cc 401 10.6 9.9 9.3 2618 0.500 0.0046 0.0054
930245700 $864.32 *

347 4.030 " " " " " 412 10.8 10.0 9.4 " " " "
930245730 $864.32 *

348 4.035 " " " " " 414 10.8 10.0 9.4 " " " "
930245735 $864.32 *

349 4.040 " " " " " 415 10.8 10.1 9.4 " " " "
930245740 $864.32 *

352 4.060 " " " " " 423 10.9 10.1 9.5 " " " "
930245760 $864.32 *

342 4.000 3.400 5.400 1.090 0.927 -6.5cc 392 10.6 9.9 9.3 4032. 0.500 0.0025 0.0033 930244700 $773.35

347 4.030 " " " " " 402 10.8 10.0 9.4 " " " " 930244730 $773.33

348 4.035 " " " " " 404 10.8 10.0 9.4 " " " " 930244735 $773.33

349 4.040 " " " " " 405 10.8 10.1 9.4 " " " " 930244740 $773.33

352 4.060 " " " " " 412 10.9 10.1 9.5 " " " " 930244760 $773.35

364 4.125 3.400 5.400 1.090R 0.927 -6.5cc 423 11.2 10.4 9.7 " " " "
930245825 $864.32 *

369 4.155 " " " " " 435 11.3 10.5 9.8 " " " "
930245855 $864.32 *

364 4.125 3.400 5.400 1.090 0.927 -6.5cc 413 11.2 10.4 9.7 4032. 0.500 0.0025 0.0033 930244825 $773.35

369 4.155 " " " " " 424 11.3 10.5 9.8 " " " " 930244855 $773.35

Compression Heights with "R" INCLUDE Oil Support Rails
*Available In Multiple Alloys
Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

Page 14
SMALL BLOCK FORD SEALED RACE ENGINES

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included 58cc 64cc 70cc Meas. Min Max

374 4.125 3.500 6.200 1.245 0.927 -6.5cc 435 11.5 10.7 10.0 4032. 0.500 0.0025 0.0033
930244425 $773.33 *

375 4.128 " " " " " 436 11.5 10.7 10.0 " " " "
930244428 $773.33 *

375 4.130 " " " " " 437 11.5 10.7 10.0 " " " "
930244430 $773.33 *

375 4.132 " " " " " 438 11.5 10.7 10.0 " " " "
930244432 $773.33 *

347 4.030 3.400 5.400 1.090 0.927 -6.5cc 402 10.8 10.0 9.4 4032. 0.500 0.0025 0.0033
930244730 $773.33 **

347 4.032 " " " " " 403 10.8 10.0 9.4 " " " "
930244732 $773.33 **

348 4.035 " " " " " 404 10.8 10.0 9.4 " " " "
930244735 $773.33 **

348 4.037 " " " " " 404 10.8 10.0 9.4 " " " "
930244737 $773.33 **

349 4.040 " " " " " 405 10.8 10.0 9.4 " " " "
930244740 $773.33 **

349 4.042 " " " " " 406 10.8 10.1 9.4 " " " "
930244742 $773.33 **

350 4.045 " " " " " 407 10.8 10.1 9.4 " " " "
930244745 $773.33 **

350 4.047 " " " " " 408 10.8 10.1 9.4 " " " "
930244747 $864.31 **

350 4.050 " " " " " 409 10.8 10.1 9.4 " " " "
930244750 $864.31 **

* 9.2" Deck Height, for FRP S374W
** 8.2" Deck Height, for FRPD347SR and S347JR
Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

SMALL BLOCK FORD
WISSOTA CONCEPT PISTON
1.5, 1.5, 3.0mm File Fit Performance Ring Set Included
APPROVED PN w/ Laser Etch for WISSOTA Series 58cc 64cc 70cc

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included 58cc 64cc 70cc Meas. Min Max

347 4.030 3.400 5.400 1.090R 0.927 -16.0cc 384 9.6 9.0 8.5 4032. 0.500 0.0025 0.0033 928905930 $944.38

349 4.040 " " " " " 388 9.7 9.1 8.6 " " " " 92890594

350 4.050 " " " " " 391 9.7 9.1 8.6 " " " " 928905950 $944.38

352 4.060 " " " " " 395 9.7 9.2 8.6 " " " " 928905960 $944.38

Compression Heights with "R" INCLUDE Oil Support Rails
Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

SMALL BLOCK FORD FLAT TOP TransAm TA2 Homologation Gasported PowerPak Plus
Incremental bore sizes available by special order

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included 64cc Meas. Min Max

374 4.125 3.500 6.250 1.245 0.927 -6.5cc 447 10.5 2618 0.250 0.0061 0.0069 197722725 $987.21

375 4.130 " " " " " 449 10.5 " " " " 197722730 $987.21

376 4.135 " " " " " 450 10.5 " " " " 197722735 $987.21

Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

SMALL BLOCK FORD DOME

• Forged from 2618 low expansion aluminum alloy for high strength & reduced piston to wall clearance
• Forced Pin Oiling
• Precision Pin Fitting & Race Proven Round Wire Locks included
• High strength, light weight German steel wrist pins
• Low drag ring pack

SMALL BLOCK FORD DOME

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included 58cc 64cc 70cc Meas. Min Max

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included 58cc 64cc 70cc Meas. Min Max

332 4.030 3.250 5.400 1.165 0.927 7.0cc 461 12.4 11.4 10.5 2618 0.500 0.0046 0.0054 930247030 $855.22

347 4.030 3.400 5.400 1.090R 0.927 7.0cc 446 13.0 11.9 11.0 2618 0.500 0.0046 0.0054 930247130 $944.38

364 4.125 " " " " " 470 13.5 12.3 11.4 2618 0.500 0.0051 0.0059
930247325 $1,249.10 *

Compression Heights with "R" INCLUDE Oil Support Rails *PowerPak Plus 2618 Alloy & Lateral Gasports.
Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

SMALL BLOCK Ford INVERTED DOME

SMALL BLOCK FORD INVERTED DOME for the TWISTED WEDGE® CYL HEAD

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included
61cc Meas. Min Max

332 4.030 3.250 5.400 1.165 0.927 -16cc 461
9.0 2618 0.500 0.0046 0.0054
930251330 $855.22 *

333 4.040 " " " " " 465 9.0 " " " "
930251340 $855.22 *

332 4.030 " " " " " 448 9.0 4032. 0.500 0.0025 0.0033 930251030 $855.22

333 4.040 " " " " " 452 9.0 " " " " 930251040 $855.22

347 4.030 3.400 5.400 1.090R 0.927 -16cc 443 9.3 2618 0.500 0.0046 0.0054
930251530 $944.38 *

349 4.040 " " " " " 447 9.4 " " " "
930251540 $944.38 *

347 4.030 " " " " " 431 9.3 4032. 0.500 0.0025 0.0033 930251130 $944.38

349 4.040 " " " " " 435 9.4 " " " " 930251140 $944.38

364 4.125 " " " " -18cc 466 9.5 2618 0.500 0.0046 0.0054
930251625 $944.38 *

Compression Heights with "R" INCLUDE Oil Support Rails
*Available In Multiple Alloys
Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

SMALL BLOCK Ford CLEVELAND FLAT TOP

Page 16
SMALL BLOCK FORD CLEVELAND

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included 60cc 64cc 72cc Meas. Min Max

357 4.030 3.500 6.000 1.450 0.927 -3.2cc 487 11.2 10.7 9.8 4032. 0.500 0.0025 0.0033 930252030 $773.35

393 4.030 3.850 6.000 1.275 0.927 -3.2cc 478 12.2 11.7 10.6 2618 0.500 0.0046 0.0054
930252830 $773.35 *

395 4.040 " " " " " 482 12.3 11.7 10.7 " " " "
930252840 $773.35 *

393 4.030 " " " " " 464 12.2 11.7 10.6 4032. 0.500 0.0025 0.0033 930252130 $773.35

395 4.040 " " " " " 468 12.3 11.7 10.7 " " " " 930252140 $773.35

408 4.030 4.000 6.000 1.200R 0.927 -20cc 469 10.5 10.1 9.3 2618 0.500 0.0046 0.0054
930252930 $944.38 *

408 4.030 " " " " -3.2cc 464 12.7 12.1 11.0 " " " "
930253130 $864.32 *

408 4.030 4.000 6.000 1.200R 1.200 -20cc 457 10.5 10.1 9.3 4032. 0.500 0.0025 0.0033 930252430 $855.22

408 4.030 " " " " -3.2cc 453 12.7 12.1 11.0 " " " " 930252630 $773.35

Compression Heights with "R" INCLUDE Oil Support Rails *Available In Multiple Alloys
Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

SMALL BLOCK Ford CLEVELAND
INVERTED DOME

Part #
Your Cost BORE Stroke ROD
Length PIN
Dia. COMP
Height DOME
Vol. Weight
Grams C/R

930252430 $855.22 4.030 4.000 6.000 .927 1.200R -20cc 435 10

Compression Heights with "R" INCLUDE Oil Support Rails

4.6/5.4 MODULAR FORD INVERTED DOME (Modular 2 / 4-valve)

• Forged from M142p
• Forced Pin Oiling
• Precision Pin Fitting & Race Proven Round Wire Locks included
• High strength, light weight German steel wrist pins
• Low drag ring pack

4.6/5.4 MODULAR FORD FLAT TOP (Modular 2 / 4-valve Flat Top)

• Forged from M142P or 2618
• Forced Pin Oiling
• Precision Pin Fitting & Race Proven Round Wire Locks included
• High strength, light weight German steel wrist pins
• Low drag ring pack

FORD MODULAR 4.6 2-VALVE or 4-VALVE

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included 42cc 46cc 52cc Meas. Min Max

281 3.552 3.543 5.930 1.220 0.866 -16.0cc 356 9.9 9.4 8.7 M142P 0.500 0.0006 0.0014 930256052 $857.02

284 3.572 " " " " " 363 10.0 9.5 8.8 " " " " 930256072 $857.02

285 3.582 " " " " " 367 10.1 9.5 8.8 " " " " 930256082 $857.02

284 3.572 " " " " -22.0cc 374 9.2 8.8 8.2 2618 0.500 0.0025 0.0033
930256172 $1,008.06 *

281 3.552 " " " " 0cc 392 12.9 12.0 10.8 M142P 0.500 0.0006 0.0014 930256252 $773.33

284 3.572 " " " " " 399 13.0 12.1 10.9 " " " " 930256272 $773.33

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications;
for Use with Aftermarket Rods Only
Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

NHRA LEGAL FORD MODULAR 5.4L 4-VALVE (2008, 2010, 2012 COBRA JET)
Available in bore sizes up to the legal NHRA limit of +0.080" oversize; call for sizes/other tech; NHRA PN 197740100.

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.5, 1.5, 2.5mm Ring Grooves (rings not included) " " " Meas. Min Max

330 3.552 4.165 6.657 1.230 0.866 -12.6cc 364 Dependent upon bore size M142P 0.500 0.0060 0.0014 197740100 $1,008.06 *

334 3.572 " " " " " 371 Dependent upon bore size " " " " 197740100 $1,008.06 *

343 3.622 " " " " " 389 Dependent upon bore size " " " " 197740100 $1,008.06 *

*Hard Anodized Top Ring Groove For Extreme Duty Applications

FORD MODULAR 5.4
2-VALVE or 4 VALVE

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included
CR calculated at 0.118" below deck and 0.040" head gasket thickness 42cc 46cc 52cc Meas. Min Max

330 3.552 4.165 6.657 1.220 -16.0cc 356 9.1 8.7 8.2 M142P 0.500 0.0006 0.0014 930256052 $857.02

334 3.572 " " " " " 363 9.1 8.8 8.3 " " " " 930256072 $857.02

336 3.582 " " " " " 367 9.2 8.8 8.3 " " " " 930256082 $857.02

334 3.572 " " " "
-22.0cc
374 8.6 8.3 7.8 2618 0.500 0.0025 0.0033
930256172 $1,008.06 *

330 3.552 " " " "
0cc
392 11.0 10.4 9.7 M142P 0.500 0.0006 0.0014 930256252 $773.33

334 3.572 " " " " " 399 11.1 10.5 9.8 " " " " 930256272 $773.33

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications.
Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

FORD 5.0L MODULAR 4-VALVE COYOTE

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included
57cc Meas. Min Max

302 3.630 3.650 5.933 1.167 0.866 10.2cc 397
12.6 2618 0.250 0.0025 0.0033 930258130 $1,008.06 *

304 3.640 " " " " " 400
12.6 " " " " 930258140 $1,008.06 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications.

FORD 5.0L MODULAR 4-VALVE COYOTE / VOODOO (Combined Dome/Pocket Geometry)

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included
57cc Meas. Min Max

302 3.630 3.650 5.933 1.167 0.866 3.0cc 389
11.2 M142P 0.250 0.0006 0.0014
930258030 $857.02 **

304 3.640 " " " " " 392
11.2 " " " "
930258040 $857.02 **

302 3.630 3.650 5.933 1.167 0.866 -4.5cc 383
10.1 M142P 0.250 0.0006 0.0014
930134030 $857.02 **

304 3.640 " " " " " 386
10.1 " " " "
930134040 $857.02 **

302 3.630 3.650 5.933 1.167 0.866 -13.1cc 359
9.1 2618 0.250 0.0025 0.0033
930258230 $1,008.06 *

304 3.640 3.650 5.933 1.167 0.866 " 362
9.1 " " " "
930258240 $1,008.06 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications.
**Hard Anodized Top Ring Groove for Extreme Duty Applications
Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

FORD 5.0L MODULAR COYOTE Gen 3 Direct Injected (2018+)
DROP-IN FORGED REPLACEMENT ASSEMBLY NO BALANCING, NO COMP RATIO CHANGE
Uses OE-style rings for PTWA bores and includes DLC wrist pins

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.2mm, 1.2mm, 2.0mm File Fit Performance Ring Set Included 59cc Meas. Min Max

308 3.662 3.650 5.933 1.167 0.866 8.4cc 373 12.0 2618 0.250 0.0025 0.0033 930258362 $1,008.06 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications.
Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise noted

Page 17

NHRA LEGAL FORD 5.0L MODULAR 4-VALVE (2014, 2015 COBRA JET)
Available in bore sizes up to the legal NHRA limit of +0.080" oversize; call for sizes/other tech; NHRA PN 197736200.

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.2, 1.2, 2.5mm Ring Grooves (rings not included)
57cc Meas. Min Max

302 3.630 3.650 5.933 1.167 0.866 -8.8cc 350 9.5 2618 0.500 0.0025 0.0033 197736230 $1,008.06 *

306 3.650 " " " " " 356 9.6 " " " " 197736250 $1,008.06 *

314 3.700 " " " " " 372 9.8 " " " " 197736200 $1,008.06 *

314 3.702 " " " " " 373 9.8 " " " " 197736202 $1,008.06 *

315 3.705 " " " " " 374 9.8 " " " " 197736205 $1,008.06 *

315 3.707 " " " " " 374 9.9 " " " " 197736207 $1,008.06 *

316 3.710 " " " " " 375 9.9 " " " " 197736210 $1,008.06 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications.

NHRA LEGAL FORD 5.0L MODULAR 4-VALVE (2016 COBRA JET)
Available in bore sizes up to the legal NHRA limit of +0.080" oversize; call for sizes/other tech; NHRA PN 930049900.

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.2, 1.2, 2.5mm Ring Grooves (rings not included)
57cc Meas. Min Max

302 3.630 3.650 5.933 1.167 0.866 7.3cc 377 12.0 2618 0.500 0.0016 0.0023 930049930 $1,008.06 *

306 3.650 " " " " " 384 12.1 " " " " 930049950 $1,008.06 *

314 3.700 " " " " " 400 12.3 " " " " 930049900 $1,008.06 *

314 3.702 " " " " " 401 12.3 " " " " 930049902 $1,008.06 *

315 3.705 " " " " " 402 12.4 " " " " 930049905 $1,008.06 *

315 3.707 " " " " " 402 12.4 " " " " 930049907 $1,008.06 *

316 3.710 " " " " " 403 12.4 " " " " 930049910 $1,008.06 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications.

FORD 5.2L VOODOO DROP-IN FORGED REPLACMENT ASSEMBLY
NO BALANCING, NO COMP RATIO CHANGE
1.0, 1.2, 2.0mm Performance Ring Set included
Accepts Aftermarket rectangular rod or OE tapered small end

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

CR calculated at 0.012" below deck and 0.039" head gasket thickness
57cc Meas. Min Max

315 3.701 3.661 5.933 1.161 0.827 7.8cc 380
12.0 M142P 0.250 0.0010 0.0018 930258401 $1,126.66

FORD FLATHEAD - 3/16" STANDARD DOME
1/16, 1/16, 3/16 Performance Ring Set included

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

Compression ratio calculated with 14cc gasket volume. 65cc 74cc Meas. Min Max

276 3.312 4.000 7.000 1.438 0.750 12.8cc 338
8.9 8.0 4032. 0.500 0.0016 0.0023 930074712 $700.55

281 3.342 " " " " " 348 9.0 8.1 " " " " 930074742 $700.55

286 3.375 " " " " " 359 9.1 8.2 " " " " 930074775 $700.55

284 3.312 4.125 7.000 1.375 0.750 12.8cc 324 9.1 8.2 4032. 0.500 0.0016 0.0023 930074812 $700.55

290 3.342 " " " " " 333 9.2 8.3 " " " " 930074842 $700.55

295 3.375 " " " " " 344 9.4 8.5 " " " " 930074875 $700.55

293 3.312 4.250 7.000 1.313 0.750 12.8cc 310 9.4 8.4 4032. 0.500 0.0016 0.0023 930074912 $700.55

298 3.342 " " " " " 320 9.5 8.5 " " " " 930074942 $700.55

304 3.375 " " " " " 330 9.6 8.7 " " " " 930074975 $700.55

*Top ring land is .280" tall to accomodate relieved blocks
Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt. "Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

BIG BLOCK Ford FLAT TOP

• Forged from 4032. low expansion aluminum alloy for high strength & reduced piston to wall clearance
• Forced Pin Oiling
• Precision Pin Fitting & Race Proven Round Wire Locks included
• High strength, light weight German steel wrist pins
• Low drag ring pack

BIG BLOCK FORD

1.5, 1.5, 3.0mm File Fit Performance Ring Set included 72cc 80cc 84cc

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included 72cc 80cc 84cc Meas. Min Max

503 4.390 4.150 6.700 1.525 0.990 -3.3cc 569 13.1 12.0 11.6 2618 0.500 0.0055 0.0063 930261590 $815.75

514 4.440 " " " " " 592 13.3 12.3 11.8 " " " " 930261540 $815.75

503 4.390 " " " " -28cc 533. 10.4 9.7 9.4 4032. 0.500 0.0041 0.0049 930246490 $891.56

514 4.440 " " " " " 556 10.6 9.9 9.6 " " " " 930246440 $891.56

521 4.390 4.300 6.800 1.350 0.990 -3.3cc 542 13.5 12.4 12.0 2618 0.500 0.0055 0.0063 930261690 $815.75

533. 4.440 " " " " " 564 13.8 12.7 12.2 " " " " 930261640 $815.75

521 4.390 " " " " -38cc 507 9.9 9.3 9.1 4032. 0.500 0.0041 0.0049 930245690 $891.56

533. 4.440 " " " " " 529 10.1 9.5 9.3 " " " " 930245640 $891.56

545 4.390 4.500 6.700 1.350 0.990 -3cc 542 14.1 13.0 12.5 2618 0.500 0.0055 0.0063 930261690 $815.75

557 4.440 " " " " " 564 14.4 13.2 12.7 " " " " 930261640 $815.75

545 4.390 " " " " -38cc 507 10.3 9.7 9.5 4032. 0.500 0.0041 0.0049 930245690 $891.56

557 4.440 " " " " " 529 10.5 9.9 9.6 " " " " 930245640 $891.56

Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

BIG BLOCK FORD for the SCJ, KAASE P-51®, AFR 14° BULLIT CYLINDER HEADS

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.5, 1.5, 3.0mm File Fit Performance Ring Set included 72cc 80cc 84cc Meas. Min Max

503 4.390 4.150 6.700 1.525 0.990 -4.1cc 567 13.0 11.9 11.5 2618 0.500 0.0055 0.0063 930261790 $815.75

514 4.440 " " " " " 590 13.2 12.2 11.7 " " " " 930261740 $815.75

503 4.390 " " " " -28cc 533. 10.4 9.7 9.4 4032. 0.500 0.0041 0.0049 930261990 $891.56

514 4.440 " " " " " 556 10.6 9.9 9.6 " " " " 930261940 $891.56

521 4.390 4.300 6.800 1.350 0.990 -4.1cc 540 13.4 12.3 11.9 2618 0.500 0.0055 0.0063 930261890 $815.75

533. 4.440 " " " " " 562 13.6 12.6 12.1 " " " " 930261840 $815.75

521 4.390 " " " " -38cc 507 9.9 9.3 9.1 4032. 0.500 0.0041 0.0049 930245690 $891.56

533. 4.440 " " " " " 529 10.1 9.5 9.3 " " " " 930245640 $891.56

545 4.390 4.500 6.700 1.350 0.990 -4.1cc 540 14.0 12.9 12.4 2618 0.500 0.0055 0.0063 930261890 $815.75

557 4.440 " " " " " 562 14.2 13.1 12.6 " " " " 930261840 $815.75

545 4.390 " " " " -38cc 507 10.3 9.7 9.5 4032. 0.500 0.0041 0.0049 930245690 $891.56

557 4.440 " " " " " 529 10.5 9.9 9.6 " " " " 930245640 $891.56

Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

Page 18

BIG BLOCK FORD for the SCJ, KAASE P-51 / SR-71® & AFR 14° BULLIT CYLINDER HEADS

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.5, 1.5, 3.0mm File Fit Performance Ring Set included 72cc 80cc 84cc Meas. Min Max

573 4.500 4.500 6.700 1.350 0.990 -5.6cc 587 14.3 13.2 12.7 2618 0.500 0.0055 0.0063 930262000 $911.73

BIG BLOCK FORD for the KAASE BOSS NINE® CYLINDER HEAD

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1/16, 1/16, 3/16 File Fit Performance Ring Set included 84cc 90cc Meas. Min Max

521 4.390 4.300 6.800 1.345R 0.990 -8.6cc 615 11.4 10.8 4032. 0.500 0.0041 0.0049
930022790 $815.75 *

545 4.390 4.500 6.700 1.345R 0.990 -8.6cc 615 11.9 11.3 4032. 0.500 0.0041 0.0049
930022790 $815.75 *

Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

FE Ford FLAT TOP

• Forged from 4032. low expansion aluminum alloy for high strength & reduced piston to wall clearance
• Forced Pin Oiling
• Precision Pin Fitting & Race Proven Round Wire Locks included
• High strength, light weight German steel wrist pins
• Low drag ring pack

FORD FE FLAT TOP

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included 68cc 72cc 76cc Meas. Min Max

416 4.080 3.980 6.490 1.665 0.975 -7.5cc 516 11.1 10.7 10.3 4032. 0.500 0.0025 0.0033 930264080 $822.46

431 4.080 4.125 6.700 1.390 0.990 -7.5cc
483 11.5 11.0 10.6 4032. 0.500 0.0025 0.0033 930264280 $822.46

434 4.090 " " " " " 487 11.6 11.1 10.6 " " " " 930264290 $822.46

445 4.080 4.250 6.700 1.325 0.990 -7.4cc 473 11.8 11.3 10.9 4032. 0.500 0.0025 0.0033 930264680 $822.46

447 4.090 " " " " " 477 11.9 11.4 10.9 " " " " 930264690 $822.46

449 4.100 " " " " " 481 11.9 11.4 11.0 " " " " 930264600 $822.46

462 4.160 " " " " " 505 12.2 11.7 11.2 " " " " 930265160 $822.46

464 4.170 " " " " " 509. 12.3 11.8 11.3 " " " " 930265170 $822.46

467 4.180 " " " " " 513 12.3 11.8 11.3 " " " " 930265180 $822.46

482 4.250 4.250 6.700 1.325 0.990 -8.8cc 498 12.5 12.0 11.5 4032. 0.500 0.0041 0.0049 930266050 $822.46

487 4.270 " " " " " 506. 12.6 12.1 11.6 " " " " 930266070 $822.46

489 4.280 " " " " " 510 12.6 12.1 11.6 " " " " 930266080 $822.46

Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

FE Ford INVERTED DOME

• Forged from 4032. low expansion aluminum alloy for high strength & reduced piston to wall clearance
• Forced Pin Oiling
• Precision Pin Fitting & Race Proven Round Wire Locks included
• High strength, light weight German steel wrist pins
• Low drag ring pack

FORD FE DISH

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included 68cc 72cc 76cc Meas. Min Max

431 4.080 4.125 6.700 1.390 0.990 -26cc
511. 9.6 9.3 9.0 4032. 0.500 0.0025 0.0033 930264180 $898.88

433. 4.090 " " " " " 516 9.7 9.3 9.0 " " " " 930264190 $898.88

445 4.080 4.250 6.700 1.325 0.990 -18cc 491 10.6 10.2 9.9 4032. 0.500 0.0025 0.0033 930264480 $898.88

447 4.090 " " " " " 496 10.7 10.3 9.9 " " " " 930264490 $898.88

449 4.100 " " " " " 500 10.7 10.3 10.0 " " " " 930264400 $898.88

462 4.160 4.250 6.700 1.325 0.990 -20cc 519 10.8 10.4 10.0 " " " " 930265060 $898.88

464 4.170 " " " " " 523 10.8 10.4 10.1 " " " " 930265070 $898.88

467 4.180 " " " " " 527 10.9 10.5 10.1 " " " " 930265080 $898.88

482 4.250 " " " " " 519 11.2 10.8 10.4 4032. 0.500 0.0041 0.0049 930264550 $898.88

487 4.270 " " " " " 527 11.2 10.8 10.5 " " " " 930264570 $898.88

489 4.280 " " " " " 531 11.3 10.9 10.5 " " " " 930264580 $898.88

445 4.080 4.250 6.700 1.325 0.990 -28cc 495 9.7 9.4 9.1 4032. 0.500 0.0025 0.0033 930264980 $898.88

447 4.090 " " " " " 499 9.7 9.4 9.1 " " " " 930264990 $898.88

449 4.100 " " " " " 503 9.8 9.4 9.2 " " " " 930264900 $898.88

462 4.160 4.250 6.700 1.325 0.990 -33cc 530 9.6 9.3 9.0 4032. 0.500 0.0025 0.0033 930264360 $898.88

Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

Page 18
SMALL BLOCK MOPAR FLAT TOP

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included 60cc 65cc 70cc Meas. Min Max

345 4.070 3.313 6.123 1.804 0.984 -5.5cc 512. 10.5 9.9 9.4 4032. 0.500 0.0025 0.0033 930270070 $773.35

365 4.030 3.580 6.123 1.670 0.984 -5.5cc 480 11.1 10.5 9.9 4032. 0.500 0.0025 0.0033 930270130 $773.35

367 4.040 " " " " " 484 11.2 10.5 10.0 " " " " 930270140 $773.35

408 4.030 4.000 6.123 1.460 0.984 -5.5cc 454 12.3 11.6 11.0 4032. 0.500 0.0025 0.0033 930270230 $773.35

410 4.040 " " " " " 458 12.4 11.6 11.0 " " " " 930270240 $773.35

416 4.070 " " " " " 470 12.5 11.8 11.1 " " " " 930270270 $773.35

Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

SMALL BLOCK MOPAR DISH

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included 60cc 65cc 70cc Meas. Min Max

408 4.030 4.000 6.123 1.460 0.984 -28cc
487. 9.7 9.2 8.9 2618 0.500 0.0046 0.0054 930271130 $855.22

410 4.040 " " " " " 492 9.7 9.3 8.9 " " " " 930271140 $855.22

416 4.070 " " " " " 505 9.8 9.4 9.0 " " " " 930271170 $855.22

408 4.030 4.000 6.123 1.460 0.984 -16cc 480 10.9 10.4 9.9 4032. 0.500 0.0025 0.0033 930271030 $855.22

410 4.040 " " " " " 484 11.0 10.4 9.9 " " " " 930271040 $855.22

414 4.060 " " " " " 492 11.0 10.5 10.0 " " " " 930271060 $855.22

Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

BIG BLOCK MOPAR (B) / 383, 400 Flat Top

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.5, 1.5, 3.0mm File Fit Performance Ring Set included 72cc 80cc 84cc Meas. Min Max

493 4.350 4.150 6.760 1.120R 0.990 -8.1cc
457. 12.2 11.3 10.9 4032. 0.350 0.0041 0.0049 929962250 $879.21

499 4.375 " " " " " 466 12.4 11.4 11.0 " " " " 929962275 $879.21

Compression Heights with "R" INCLUDE Oil Support Rails
Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application

Page 19
BIG BLOCK MOPAR (RB) /
426, 440 Flat Top

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.5, 1.5, 3.0mm File Fit Performance Ring Set included 72cc 80cc 84cc Meas. Min Max

446 4.350 3.750 6.760 2.065 0.990 -8.1cc 608 11.2 10.3 10.0 4032. 0.350 0.0041 0.0049 929962750 $815.75

493 4.350 4.150 6.760 1.865 0.990 -8.1cc 580 12.2 11.3 10.9 4032. 0.350 0.0041 0.0049 929962650 $815.75

499 4.375 " " " " " 592 12.4 11.4 11.0 " " " " 929962675 $815.75

505 4.350 4.250 7.100 1.475 0.990 -8.1cc 519 12.5 11.6 11.2 4032. 0.350 0.0041 0.0049 929962550 $815.75

511 4.375 " " " " " 530 12.6 11.7 11.3 " " " " 929962575 $815.75

520 4.350 4.375 7.100 1.412 0.990 -8.1cc 509. 12.9 11.9 11.5 4032. 0.350 0.0041 0.0049 929962450 $815.75

535 4.350 4.500 7.100 1.350 0.990 -8.1cc 500 13.2 12.2 11.8 4032. 0.350 0.0041 0.0049 929962350 $815.75

541 4.375 " " " " " 510 13.3 12.3 11.9 " " " " 929962375 $815.75

Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

HEMI 5.7L Stroker

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included 74cc 85cc Meas. Min Max

392 3.927 4.050 6.125 1.095R 0.927 -2.2cc 405 10.5 9.4 4032. 0.250 0.0025 0.0033 930276227 $864.32

394 3.937 " " " " " 408 10.6 9.5 " " " " 930276237 $864.32

396 3.947 " " " " " 411 10.6 9.5 " " " " 930276247 $864.32

392 3.927 4.050 6.125 1.095R 0.927 6cc 426 11.6 10.2 4032. 0.250 0.0025 0.0033 930276327 $944.38

394 3.937 " " " " " 429 11.6 10.3 " " " " 930276337 $1,055.49

396 3.947 " " " " " 432 11.7 10.3 " " " " 930276347 $944.38

Compression Heights with "R" INCLUDE Oil Support Rails
Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

HEMI 6.1L DROP-IN FORGED REPLACMENT ASSEMBLY
NO BALANCING, NO COMP RATIO CHANGE
Also works with 6.4L CYLINDER HEAD

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included
74cc Meas. Min Max

370 4.055 3.580 6.242 1.220 0.984 -1cc
441
10.4 4032. 0.250 0.0025 0.0033 930111655 $944.38 *

CR calculated at 0.013" above deck and 0.041" head gasket thickness
*Hard Anodized Top Ring Groove For Extreme Duty Applications

HEMI 6.1L
Also works with 6.4L CYLINDER HEAD

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included
74cc Meas. Min Max

370 4.055 3.580 6.242 1.220 0.984 -1cc 450 10.1 2618 0.250 0.0046 0.0054
930277855 $944.38 *

371 4.060 " " " " " 452 10.1 " " " "
930277860 $944.38 *

370 4.055 3.580 6.242 1.220 0.984 -1cc 441 10.1 4032. 0.250 0.0025 0.0033
930277655 $944.38 *

371 4.060 " " " " " 442 10.1 " " " "
930277660 $944.38 *

*Hard Anodized Top Ring Groove For Extreme Duty Applications
*Available In Multiple Alloys
Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

HEMI 6.1L Stroker
Also works with 6.4L CYLINDER HEAD

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included
74cc Meas. Min Max

420 4.065 4.050 6.125 1.095R 0.927 -12cc 422
10.1 4032. 0.250 0.0025 0.0033 930277565 $944.38 *

424 4.080 " " " " " 427. 10.2 " " " " 930277580 $944.38 *

426 4.090 " " " " " 431 10.2 " " " " 930277590 $944.38 *

Compression Heights with "R" INCLUDE Oil Support Rails
*Hard Anodized Top Ring Groove For Extreme Duty Applications

NHRA LEGAL 6.1L HEMI

Available in bore sizes up to the legal NHRA limit of +0.080" oversize; call for sizes/other tec

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.5, 1.5, 3.0mm Performance Ring Set included
74cc Meas. Min Max

370 4.055 3.580 6.200 1.262 0.927 10.5cc 524 Dependent Upon Bore Size 2618 0.250 0.0046 0.0054 9299871 $1,731.20 *

370 4.055 6.242 " 1.220 0.984 -1cc 426 Dependent Upon Bore Size 4032. 0.250 0.0025 0.0033
197729300 $1,644.64 **

371 4.060 " " " " " " Dependent Upon Bore Size " " " "
197729300 $1,644.64 **

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications
**Hard Anodized Top Ring Groove For Extreme Duty Applications
Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise notes

HEMI 6.4L DROP-IN FORGED REPLACMENT ASSEMBLY
NO BALANCING, NO COMP RATIO CHANGE

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide -

1.0, 1.0, 2.0mm File Fit Performance Ring Set included
CR calculated at 0.010" below deck and 0.035" head gasket thickness
74cc Meas. Min Max Part No.

392 4.090 3.724 6.200 1.211 0.945 3.6cc 444 11.0 4032. 0.250 0.0025 0.0033 930279090 $944.38 *

392 4.095 " " " " " 445 11.0 " " " " 930279095 $944.38 *

393 4.100 " " " " " 447 11.0 " " " " 930279000 $944.38 *

*Hard Anodized Top Ring Groove For Extreme Duty Applications

NHRA LEGAL 6.4L HEMI

Available in bore sizes up to the legal NHRA limit of +0.080" oversize; call for sizes/other tech

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide -

1.2mm, 1.2mm, 2.0mm Drop-in Rings included
74cc Meas. Min Max Part No.

392 4.091 3.724 6.200 1.211 0.945 3.6cc 444 Dependent Upon Bore Size 4032. 0.250 0.0025 0.0033 197729200 $1,644.64 *

*Hard Anodized Top Ring Groove For Extreme Duty Applications
Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application

Page 20
SMALL BLOCK OLDSMOBILE 350 FLAT TOP

Note: 0.984" Pin Ø requires stock 0.980" rod to be honed
CR calculated at 0.013" below deck and 0.027" head gasket thickness

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included 65cc 70cc 79cc Meas. Min Max

351 4.065 3.385 6.000 1.625 0.984 -10.2cc 502 9.6 9.1 8.4 4032. 0.500 0.0025 0.0033 197815365 $773.35

358 4.100 " " " " " 520 9.7 9.2 8.5 " " " " 197815300 $773.35

367 4.155 3.385 6.000 1.625 0.984 -10.1cc 521 10.0 9.5 8.7 " " " " 197816355 $773.35

Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application

BIG BLOCK OLDSMOBILE
455 Stroker DISH

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included 72cc 80cc 84cc Meas. Min Max

488 4.155 4.500 7.100 1.260 0.990 -22.0cc 491 10.7 10.0 9.7 4032. 0.500 0.0025 0.0033 930274555 $891.56

495 4.185 " " " " " 503 10.8 10.1 9.8 " " " " 930274585 $891.56

Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application

BIG BLOCK PONTIAC
455 Stroker FLAT TOP

Cubic
Inches Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram Comp.
Ratio Alloy Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included 72cc 80cc 84cc Meas. Min Max

461 4.155 4.250 6.800 1.285 0.990 -6.4cc 529 11.8 10.9 10.5 4032. 0.250 0.0025 0.0033 930275055 $815.75

468 4.185 " " " " " 542 12.0 11.0 10.6 " " " " 930275085 $815.75

488 4.155 4.500 6.800 1.160 0.990 -6.4cc 506. 12.5 11.5 11.1 4032. 0.250 0.0025 0.0033 930275155 $815.75

495 4.185 " " " " " 517 12.6 11.6 11.2 " " " " 930275185 $815.75

Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application

Sport Compact PowerPak Applications
Page 21
ACURA B18C1 DOHC VTEC 1.8L

CR calculated at 0.89mm below deck and 0.66mm head gasket thickness 41cc

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.0, 1.2, 2.8mm Performance Ring Set Included
41cc Meas. Min Max

81.00mm 87.2mm 137.9mm 30mm 21mm -8.0cc 274 8.9 4032. 0.236 0.0016 0.0024 929116289 $646.11

81.50mm " " " " " 277 9.0 " " " " 929116209 $646.11

81.50mm 87.2mm 137.9mm 30mm 21mm 1.0cc 290 10.5 4032. 0.236 0.0016 0.0024 929112109 $582.95

81.00mm 87.2mm 137.9mm 30mm 21mm 9.1cc 306 12.3 4032. 0.236 0.0016 0.0024 929114789 $646.11

81.25mm " " " " " 309 12.3 " " " " 929114799 $646.11

81.50mm " " " " " 312 12.4 " " " " 929114709 $646.11

ACURA RSX K20 2.0L

CR calculated at zero deck and 0.64mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included
51cc Meas. Min Max

87.00mm 86mm 139mm 30mm 22mm -9.0cc 290
9.0 4032. 0.236 0.0016 0.0024 929172525 $646.11 *

86.00mm 86mm 139mm 30mm 22mm
11.8cc
329
12.6 4032. 0.236 0.0016 0.0024 929170986 $646.11

86.50mm 86mm 139mm 30mm 22mm " 333
12.8 4032. 0.236 0.0016 0.0024 929170905 $646.11

87.00mm 86mm 139mm 30mm 22mm " 338
12.9 4032. 0.236 0.0016 0.0024 929170925 $646.11 *

*Also suitable for K24 w/ K20 cylinder head

ACURA K24 2.4L

CR calculated at 0.2mm below deck and 0.64mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included
51cc Meas. Min Max

87.25mm 99.0mm 152.0mm 30mm 22mm 4.3cc 321
12.4 4032. 0.236 0.0016 0.0024 4930024135

BMW MINI COOPER S PRINCE 2007-
Current 1.6L

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included
Stock Meas. Min Max

77.50mm 85.8mm 138.2mm 28.5mm 20mm -1.1cc 273
10.3 M142P 0.385 0.0008 0.0016 930067351 $1,021.29

BMW M54 B30 3.0L E46 (0.005" oversize)

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.5, 2.0mm Performance Ring Set Included
Stock Meas. Min Max

84.127mm 89.6mm 135mm 28.32mm 22mm 0cc 304
10.5 4032. 0.250 0.0010 0.0018 197843112 $950.04

BMW N54 B30 3.0L

CR calculated at 0.75mm above deck and 1.22mm head gasket thicknes

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.0, 1.2, 2.8mm Performance Ring Set Included
34cc Meas. Min Max

84.00mm 89.6mm 145.05mm 31.7mm 22mm -17.2cc 314
10.2 2618 0.250 0.0025 0.0033 197832209 $1,123.16 *

84.00mm " " " -21.5cc 308
9.5 2618 0.250 0.0025 0.0033 197841309 $1,123.16 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

BMW B58 3.0L (+2020 Toyota Supra)

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.5, 2.0mm Performance Ring Set Included
Stock Meas. Min Max

82.0mm 94.6mm 148.2mm 33.27mm 22mm -4.0cc 318
10.5 2618 0.500 0.0025 0.0033 197883929 $1,445.64

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

BMW S52 B32 3.2L E36 M3

CR calculated at 0.8mm above deck and 1.73mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.0, 1.2, 2.8mm Performance Ring Set Included
35.2cc Meas. Min Max

86.60mm 89.6mm 135mm 31mm 22mm -25.0cc 304
9.0 2618 0.395 0.0016 0.0024 930024709 $1,123.16 *

86.60mm " " " " -11.0cc 324
11.2 4032. 0.395 0.0006 0.0014 930024409 $1,123.16 **

86.60mm " " " " -5.0cc 342
12.5 4032. 0.395 0.0006 0.0014 930024609 $1,123.16 **

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications
**Hard Anodized Top Ring Groove For Extreme Duty Applications

BMW S54 B32 3.2L E46 M3

CR calculated at 0.25mm below deck and 0.69mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.0, 1.2, 2.8mm Performance Ring Set Included
33cc Meas. Min Max

87.50mm 91.0mm 139mm 32.3mm 21mm -29.0cc 334
9.1 2618 0.250 0.0020 0.0028 930000045 $1,123.16 *

87.50mm " " " " -9.0cc 357
12.5 2618 0.250 0.0020 0.0028 930000145 $1,123.16 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

BMW S55 3.0L F80, M3, M4

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.0, 1.2, 2.8mm Performance Ring Set Included
Stock Meas. Min Max

84.0mm 89.6mm 144.35mm 32.4mm 22mm -10.5cc 325
10.2 2618 0.250 0.0021 0.0029 197879807 $1,255.31 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications
Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application

Page 22
BMW S65 B40 4.0L

CR calculated at 0.28mm below deck and 0.59mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.5mm Performance Ring Set Included
51cc Meas. Min Max

92.00mm 75.2mm 140.7mm 27.3mm 21mm 2.1cc 366 10.1 4032. 0.500 0.0010 0.0018 197843322 $1,475.25 *

92.50mm " " " " " 372 10.2 " " " " 197843342 $1,475.25 *

92.00mm 75.2mm 140.7mm 27.3mm 21mm
12.2cc
366 12.2 4032. 0.500 0.0010 0.0018 197843622 $1,475.25 *

92.50mm " " " " " 372 12.3 " " " " 197843642 $1,475.25 *

|

*Hard Anodized Top Ring Groove For Extreme Duty Applications

BMW S85 B50 5.0L (V10)

CR calculated at 0.28mm below deck and 0.59mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.5mm Performance Ring Set Included
51cc Meas. Min Max

92.00mm 75.2mm 140.7mm 27.3mm 21mm 2.1cc 366 10.1 4032. 0.500 0.0010 0.0018 197859522 $2,061.02 *

92.50mm " " " " " 372 10.2 " " " " 197859542 $2,061.02 *

92.00mm 75.2mm 140.7mm 27.3mm 21mm 12.2cc 366 12.2 4032. 0.500 0.0010 0.0018 197859622 $2,061.02 *

92.50mm " " " " " 372 12.3 " " " " 197859642 $2,061.02 *

*Hard Anodized Top Ring Groove For Extreme Duty Applications

FORD ST EcoBoost 2.0L

CR calculated at 0.78mm below deck and 5.78cc gasket volume

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included
43cc Meas. Min Max

87.50mm 83.1mm 155.87mm 32.8mm 22.5mm -7.0cc 354 9.3 4032. 0.250 0.0016 0.0024 197713945 $737.67 **

88.00mm " " " " " 361 9.4 " " " " 197713965 $737.67 **

87.50mm 83.1mm 155.87mm 32.8mm 22.5mm -7.0cc 364 9.3 2618 0.250 0.0021 0.0029 197729445 $842.81 *

88.00mm " " " " " 371 9.4 " " " " 197729465 $842.81 *

87.50mm 83.1mm 155.87mm 32.8mm 22.5mm -2.3cc 348 10.0 4032. 0.250 0.0016 0.0024 197714245 $737.67 **

87.50mm 83.1mm 155.87mm 32.8mm 22.5mm 3.2cc 373 11.0 2618 0.250 0.0021 0.0029 197714045 $842.81 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications.
**Hard Anodized Top Ring Groove For Extreme Duty Applications

FORD EcoBoost 2.3L

CR calculated at 1.9mm below deck and 5.78cc gasket volume 1.2, 1.2, 2.8mm Performance Ring Set Included

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.0, 1.2, 2.8mm Performance Ring Set Included
43cc Meas. Min Max

87.50mm 94.0mm 149.3mm 32.8mm 22.5mm -6.5cc 355 9.5 2618 0.475 0.0021 0.0029 197755345 $842.81 *

88.00mm " " " " " 361 9.6 " " " " 197755365 $842.81 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications.
*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications.

Ford BA XR6 for Australian Fords 4.0L

cu.in. Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.5mm Performance Ring Set Included
65cc Meas. Min Max

243 3.633 3.910 6.057 1.216 0.866 -13.6cc 334 8.8 4032. 0.355 0.0025 0.0033 929984815 $730.51

244 3.637 " " " " " 336 8.8 " " " " 929984805 $730.51

246 3.652 " " " " " 341 8.9 " " " " 929984820 $730.51

243 3.633 3.910 6.057 1.216 0.866
-13.6cc
344 8.8 2618 0.355 0.0031 0.0039 929966115 $867.33 *

244 3.637 " " " " " 346 8.8 " " " " 929966105 $867.33 *

246 3.652 " " " " " 351 8.9 " " " " 929966120 $867.33 *

*PowerPak Plus 2618 Alloy for Extreme Duty Applications.

HONDA B16, A1, A2, A3 DOHC VTEC 1.6L
CR calculated at 0.55mm below deck and 0.66mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.0, 1.2, 2.8mm Performance Ring Set Included
42cc Meas. Min Max

81.50mm 77.4mm 134mm 30mm 21mm 1.0cc 290 9.5 4032. 0.236 0.0016 0.0024 929112109 $582.95

81.00mm 77.4mm 134mm 30mm 21mm 9.1cc 306 11.2 4032. 0.236 0.0016 0.0024 929114789 $646.11

81.25mm " " " " " 309 11.2 " " " " 929114799 $646.11

81.50mm " " " " " 312 11.3 " " " " 929114709 $646.11

HONDA B18C1 DOHC VTEC 1.8L

CR calculated at 0.89mm below deck and 0.66mm head gasket thicknes

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.0, 1.2, 2.8mm Performance Ring Set Included
41cc Meas. Min Max

81.50mm 87.2mm 137.9mm 30mm 21mm 1.0cc 290 10.5 4032. 0.236 0.0016 0.0024 929112109 $582.95

81.00mm 87.2mm 137.9mm 30mm 21mm 9.1cc 306 12.3 4032. 0.236 0.0016 0.0024 929114789 $646.11

81.25mm " " " " " 309 12.3 " " " " 929114799 $646.11

81.50mm " " " " " 312 12.4 " " " " 929114709 $646.11

HONDA H22 GOLD SERIES 2.2L - FOR USE IN FACTORY FRM
(FIBER REINFORCED MATRIX) CYLINDERS ONLY)
CR calculated at 0.15mm below deck and 0.66mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included
54cc Meas. Min Max

87.00mm 90.7mm 143mm 31mm 22mm -7.0cc 293 9.2 4032. 0.236 0.0016 0.0024 930081525 $732.75

87.25mm " " " " " 296 9.2 " " " " 930081535 $732.75

87.00mm 90.7mm 143mm 31mm 22mm -1.0cc 309 10.0 4032. 0.236 0.0016 0.0024 930082325 $671.38

87.00mm 90.7mm 143mm 31mm 22mm 9.8cc 335 12.0 4032. 0.236 0.0016 0.0024 930083125 $732.75

87.25mm " " " " " 338 12.1 " " " " 930083135 $732.75

Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application

Page 23

HONDA S2000 F20C 2.0L GOLD SERIES - FOR USE IN FACTORY FRM = (FIBER REINFORCED MATRIX) CYLINDERS ONLY) CR calculated at 1.0mm above deck and 0.76mm head gasket thickness
Designed for Aftermarket Rods

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included
54cc Meas. Min Max

87.00mm 84.0mm 153mm 30mm 23mm 9.0cc 331 12.5 4032. 0.375 0.0006 0.0014 929986125 $841.05 **

87.10mm " " " " " 332 12.5 4032. " " " 929986129 $841.05 **

87.25mm " " " " " 334 12.5 4032. " " " 929986135 $841.05 **

87.00mm 84.0mm 153mm 30mm 23mm -11.0cc 303 8.9 2618 0.375 0.0016 0.0024 929986425 $841.05 *

87.25mm " " " " " 306 8.9 2618 " " " 929986435 $841.05 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications
**Hard Anodized Top Ring Groove For Extreme Duty Applications

HONDA S2000 F22C 2.2L GOLD SERIES - FOR USE IN FACTORY FRM (FIBER REINFORCED MATRIX) CYLINDERS ONLY) CR calculated at 1.0mm above deck and 0.76mm head gasket thickness
Designed for Aftermarket Rods

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included
54cc Meas. Min Max

87.00mm 90.7mm 149.65mm 30mm 23mm 9.0cc 331 13.4 4032. 0.375 0.0006 0.0014 929986125 $841.05 **

87.10mm " " " "
332
13.4 4032. 0.375 " " 929986129 $841.05 **

87.25mm " " " "
334
13.4 4032. 0.375 " " 929986135 $841.05 **

87.00mm 90.7mm 149.65mm 30mm 23mm -11.0cc 303 9.5 2618 0.375 0.0016 0.0024 929986425 $841.05 *

87.25mm " " " " 306 9.5 2618 0.375 " " 929986435 $841.05 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications
**Hard Anodized Top Ring Groove For Extreme Duty Applications

HYUNDAI THETA L-4 TURBO 2.0L

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included
50.5cc Meas. Min Max

86.00mm 86.0mm 146mm 30mm 22mm -11.4cc 300
8.5 2618 0.260 0.0025 0.0033 929960585 $646.11

Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application

MAZDA MZR 2.3L DISI

CR calculated at 0.5mm below deck and 4.69cc gasket volume

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included
44cc Meas. Min Max

87.50mm 94.0mm 150.622mm
32.87mm

22.5mm

-15.2cc
342 9.5 2618 0.250 0.0021 0.0029 197723845 $759.81 *

88.00mm " " " " " 349 9.6 " " " " 197723865 $759.81 *

87.50mm 94.0mm 150.622mm
32.87mm

22.5mm

-15.2cc
334 9.5 4032. 0.250 0.0016 0.0024 197786145 $646.11 **

88.00mm " " " " " 340 9.6 " " " " 197786165 $646.11 **

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications.
**Hard Anodized Top Ring Groove

MITSUBISHI 4G63 2.0L 88-92 ECLIPSE

CR calculated at 0.3mm below deck and 1.3mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included
47cc Meas. Min Max

85.50mm 88.0mm 150mm 34.7mm 21mm -10.0cc 313 8.7 4032. 0.236 0.0016 0.0024 929981966 $646.11

86.00mm " " " " " 319 8. 7 " " " " 929981986 $646.11

MITSUBISHI 4G63 2.0L 93-02 ECLIPSE 03-09 LANCER EVO
CR calculated at 0.3mm below deck and 1.3mm head gasket thickness 47cc

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included
47cc Meas. Min Max

85.00mm 88.0mm 150mm 34.7mm 22mm -10.0cc 305 8.6 4032. 0.236 0.0016 0.0024 930130046 $646.11

85.50mm " " " " " 311 8.7 " " " " 930130066 $646.11

86.00mm " " " " " 318 8.7 " " " " 930130086 $646.11

85.50mm 88.0mm 150mm 34.7mm 22mm -10.0cc 315 8.7 2618 0.236 0.0025 0.0033 929925866 $759.81 *

86.00mm " " " " " 321 8.7 " " " " 929925885 $759.81 *

85.50mm 94.0mm 150mm 31.7mm 22mm -11.9cc 312 8.9 9.0 2618 0.236 0.0025 0.0033 930143666 $759.81 *

86.00mm " " " " " 318 " " " " " 930143685 $759.81 *

85.50mm 100.0mm 150mm 28.7mm 22mm -18.6cc 276 8.7 4032. 0.236 0.0016 0.0024 930131866 $646.11

86.00mm " " " " " 282 8.8 " " " " 930131886 $646.11

85.50mm 100.0mm 150mm 28.7mm 22mm -18.6cc 280 8.7 8.8 2618 0.236 0.0025 0.0033 929990666 $759.81 *

86.00mm " " " " " 286 " " " " " 929990685 $759.81 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

MITSUBISHI 4B11T EVO X 2.0L

CR calculated at zero deck and 1.02mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included
49cc Meas. Min Max

86.00mm 86.0mm 143.75mm 33.37mm 23mm -4.5cc 331 9.4 2618 0.500 0.0025 0.0033 929945985 $759.81 *

86.50mm " " " " " 337 9.5 " " " " 929945905 $759.81 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications
Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application.
Compression Ratio - calculated at zero deck and 0.040" gasket unless otherwise noted

Page 24
NISSAN SR20DET (SILVIA) 2.0L

NOTE : Must check oil squirter clearance, possible modification needed.
CR calculated at 0.47mm below deck and 1.09mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included
46.5cc Meas. Min Max

86.50mm 86.0mm 136mm 31.83mm 22mm -11.5cc 309 8.5 4032. 0.236 0.0016 0.0024 930101105 $646.11

87.00mm " " " " " 313 8.6 " " " " 930101125 $646.11

NISSAN RB25DET (SKYLINE) 2.5L

NOTE : Must check oil squirter clearance, possible modification needed.
CR calculated at 0.15mm above deck and 0.99mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included
62cc Meas. Min Max

86.50mm 71.7mm 121.5mm 31.3mm 21mm 11.5cc 353
8.5 4032. 0.236 0.0016 0.0024 929811650 $730.51

NISSAN RB26DETT (SKYLINE) 2.6L

NOTE : Must check oil squirter clearance, possible modification needed.
CR calculated at 0.1mm above deck and 1.57mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included
65cc Meas. Min Max

86.50mm 73.7mm 121.5mm 30.25mm 21mm 16.0cc 366 8.5 2618 0.236 0.0031 0.0039 930110205 $940.32 *

87.00mm " " " " " 372 8.6 " " " " 930110225 $940.32 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

NISSAN RB30E/RB30ET (SKYLINE) 3.0L

CR calculated at 0.5mm below deck and 1.0mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included
58cc Meas. Min Max

86.50mm 85.0mm 152.5mm 32.5mm 21mm -4.3cc 323
8.0 4032. 0.236 0.0016 0.0024 929810950 $730.51

86.50mm " " " " 332
8.0 2618 0.236 0.0031 0.0039 929994605 $896.97 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

NISSAN VQ35DET
(350z, INFINITI G35) 3.5L

CR calculated at zero deck and 1.14mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.5mm Performance Ring Set Included
56cc Meas. Min Max

95.50mm 81.4mm 144.1mm 29.6mm 22mm -5.0cc 388 9.4 4032. 0.250 0.0016 0.0024 929809360 $730.51

96.00mm " " " " " 394 9.5 " " " " 929809380 $730.51

NISSAN GT-R VR38DETT 3.8L

CR calculated at 0.45mm below deck and 1.0mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.5mm Performance Ring Set Included
64cc Meas. Min Max

95.51mm 88.4mm 165.1mm 34.25mm 23mm -3.6cc 430
9.1 2618 0.500 0.0025 0.0033 929942860 $1,048.52 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

NISSAN GT-R STROKER
VR38DETT 4.1L

CR calculated at 0.45mm below deck and 1.0mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.5mm Performance Ring Set Included
64cc Meas. Min Max

95.51mm 94.4mm 165.1mm 31.25mm 23mm -4.8cc 407
9.5 2618 0.250 0.0025 0.0033 930285660 $1,048.52 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

SUBARU 2.0L EJ20

CR calculated at 0.3mm below deck and 0.6mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.5mm Performance Ring Set Included
49cc Meas. Min Max

92.00mm 75.0mm 130.5mm 32.7mm 23mm -12.0cc 346 8.4 4032. 0.235 0.0021 0.0029 930020322 $646.11

92.50mm " " " " " 352 8.5 " " " " 930020342 $646.11

93.00mm " " " " " 359 8.6 " " " " 930020362 $646.11

92.50mm 75.0mm 130.5mm 32.7mm 23mm
-12.0cc
362 8.5 2618 0.235 0.0031 0.0039 929927942 $759.81 *

93.00mm " " " " " 369 8.6 " " " " 929927961 $759.81 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

SUBARU 2.2L STROKER

CR calculated at 0.7mm below deck and 0.6mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.5mm Performance Ring Set Included
49cc Meas. Min Max

92.50mm 79.0mm 130.5mm 30.3mm 23mm -16.0cc 337 8.2 4032. 0.235 0.0021 0.0029 929847842 $646.11

93.00mm " " " " " 344 8.3 " " " " 929847861 $646.11

92.50mm 79.0mm 130.5mm 30.3mm 23mm -16.0cc 347 8.2 2618 0.235 0.0031 0.0039 929928142 $759.81 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

SUBARU FA20 TURBO

CR calculated at 0.2mm below deck and 0.61 x 89.5mm head gasket

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included
40cc Meas. Min Max

86.0mm 86.0mm 129.3mm 32.5mm 22mm -8.0cc 320 10.5 2618 0.500 0.0021 0.0029 197769285 $759.81 *

86.5mm " " " " " 326 10.6 " " " " 197769205 $759.81 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications
Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application

Page 25

SUBARU WRX 2.5L STI, FORESTER, LEGACY
CR calculated at 0.3mm below deck and 0.6mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set Included 50cc 56cc Meas. Min Max

99.50mm 79.0mm 130.5mm 30.7mm 23mm
-19.3cc

398
9.1 8.5 4032. 0.250 0.0021 0.0029 930285017 $646.11

99.75mm " " " " "
401
9.1 8.5 " " " " 930285027 $646.11

100.0mm " " " " "
405
9.1 8.5 " " " " 930285037 $646.11

99.50mm 79.0mm 130.5mm 30.7mm 23mm
-19.3cc

409
9.1 8.5 2618 0.250 0.0031 0.0039 930285117 $759.81 *

99.75mm " " " " "
413
9.1 8.5 " " " " 930285127 $759.81 *

100.0mm " " " " "
417
9.1 8.5 " " " " 930285137 $759.81 *

99.50mm 79.0mm 130.5mm 30.7mm 23mm
-14.1cc

411
9.6 9.0 4032. 0.250 0.0021 0.0029 930285217 $646.11

99.75mm " " " "
414
" 9.7 9.0 " " " " 930285227 $646.11

100.00mm " " " "
418
" 9.7 9.0 " " " " 930285237 $646.11

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

SUBARU WRX 2.5L STI,
BOXED STRUT CONSTRUCTION

CR calculated at 0.3mm below deck and 0.6mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set Included 50cc 56cc Meas. Min Max

99.50mm 79.0mm 130.5mm 30.7mm 23mm -14.1cc 403 9.6 9.0 2618 0.250 0.0031 0.0039 930285417 $1,081.99 *

99.75mm " " " " " 406 9.7 9.0 " " " " 930285427 $1,081.99 *

100.00mm " " " " " 409 9.7 9.0 " " " " 930285437 $1,081.99 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

TOYOTA 2ZZ-GE (CELICA GT-S) 1.8L

CR calculated at 0.5mm below deck and 0.48mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.0, 1.2, 2.8mm Performance Ring Set Included
38cc Meas. Min Max

82.01mm 85.0mm 137.9mm 31.2mm 20mm -12.0cc 298
9.1 4032. 0.250 0.0016 0.0024 929833600 $732.75

82.01mm " " " " 4.3cc 330
12.5 4032. 0.250 0.0016 0.0024 929833700 $732.75

TOYOTA 3S-GTE 2.0L 90-95 MR2 TURBO

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included
51cc Meas. Min Max

86.50mm 86.0mm 138mm 35.0mm 22mm -4.1cc 343
9.0 4032. 0.236 0.0016 0.0024 929807705 $646.11

TOYOTA 2JZ-GTE (SUPRA) 3.0L

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included
46cc Meas. Min Max

86.50mm 86.0mm 142.0mm 34.0mm 22mm -14.2cc 337
8.5 2618 0.236 0.0031 0.0039 928989305 $940.32 *

87.00mm " " " " " 343
8.6 " " " " 928989325 $940.32 *

*PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

VOLKSWAGEN/AUDI EA113
(95-2000) 1.8L TURBO

CR calculated at zero deck and 1.14mm head gasket thickness
1.0, 1.2, 2.8mm Performance Ring Set Included

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included
42cc Meas. Min Max

81.00mm 86.4mm 144mm 32.7mm 20mm -12.0cc 287 8.4 4032. 0.395 0.0010 0.0018 930229089 $818.95

81.50mm " " " " " 294 8.5 " " " " 930229009 $732.75

VOLKSWAGEN/AUDI
EA 113 (2000+) 1.8L TURBO

CR calculated at zero deck and 1.14mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.0, 1.2, 2.8mm Performance Ring Set Included
42cc Meas. Min Max

81.50mm 86.4mm 144mm 32.7mm 19mm -12.0cc 296
8.5 4032. 0.395 0.0010 0.0018 929960209 $732.75

*Hard Anodized Top Ring Groove

VOLKSWAGEN/AUDI
B5 S4 2.7L 6-cyl. 5V TURBO

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.0, 1.2, 2.8mm Performance Ring Set Included
42cc Meas. Min Max

81.50mm 86.4mm 154mm 30.7mm 21mm -7.2cc 295
9.0 4032. 0.395 0.0010 0.0018 930070509 $969.18 *

*Hard Anodized Top Ring Groove

VOLKSWAGEN TFSi
EA113 (2006-2009) 2.0L TURBO

CR calculated at zero deck and 0.8mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.0, 1.2, 2.8mm Performance Ring Set Included
45cc Meas. Min Max

82.50mm 92.8mm 144mm 29.6mm 20mm -10.4cc 312 9.3 M142P 0.250 0.0010 0.0018 197799948 $868.10 *

83.00mm " " " " -11.1cc 318 9.3 " " " " 197800168 $868.10 **

83.50mm " " " " " 323 9.4 " " " " 197800187 $868.10 **

*PowerPak Plus M142 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications
**1.2, 1.2, 2.8mm Performance Ring Set Included

VOLKSWAGEN TSi
EA888 (2010+) 2.0L TURBO

CR calculated at zero deck and 1.0mm head gasket thickness

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.5, 2.0mm Performance Ring Set Included
46cc Meas. Min Max

82.50mm 92.8 mm 144 mm 29.6mm 21mm -7.1cc 323 9.5 M142P 0.250 0.0010 0.0018 930188548 $868.10 *

83.00mm " " " " " 328 9.6 " " " " 930188568 $868.10 *

*PowerPak Plus M142 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications
Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt.
"Min" and "Max" is the suggested range of clearance over the coating for each application

Page 26
VOLKSWAGEN VR6 3.2L 4V

CR calculated at zero deck and 1.0mm head gasket thickness 39cc

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included
46cc Meas. Min Max

84.50mm 95.9mm 164mm 34.7mm 20mm -22.5cc 358
9.0 2618 0.175 0.0025 0.0033 930016626 $969.18

VOLKSWAGEN BEETLE Type I, II, II

Rod length, deck height and compression ratio will vary based on engine combVarious

Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

1.2, 1.2, 2.5mm Performance Ring Set Included
- Meas. Min Max

94.00mm 82.0mm - 35mm 22mm 0cc 380 - 2618 0.500 0.0034 0.0042 930285900 $482.35

94.00mm 84.0mm - " " " 380 - " " " " 930285900 $482.35

94.00mm 86.0mm - " " " 380 - " " " " 930285900 $482.35

94.00mm 88.0mm - " " " 380 - " " " " 930285900 $482.35

Page 26

Diesel PowerPak Applications
CUMMINS 5.9L B-Series Cast Performance Pistons - 12V w/ 0.150" deep valve pockets
Early 12V and marine-style bowl, short pin design, coated skirt - CR calculated with 0.019" piston protrusion above deck and 0.060 x 4.150" head gasket

Cubic
Inch
Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

Ring Set (S42170) Included
7cc
Meas. Min Max

359 4.015 4.724 7.559 2.817 1.575 -47.1cc 1119 $22.96 16.5 M124 0.500 0.0055 0.0063 930036315 $811.13

362 4.035 " " " " "
1138
16.6 " " " " 930036335 $859.60

366 4.055 " " " " "
1158
16.8 " " " " 930036355 $811.13

359 4.015 4.724 7.559 2.817 1.575 -52.4cc 1105 15.3 M124 0.500 0.0055 0.0063 930036515 $811.13

362 4.035 " " " " "
1124
15.4 " " " " 930036535 $811.13

366 4.055 " " " " "
1144
15.6 " " " " 930036555 $811.13

CUMMINS 5.9L B-Series Cast Performance Pistons - 12V w/ 0.150" deep valve pockets
Early 12V and marine-style bowl, short pin design, coated skirt - CR calculated with 0.019" piston protrusion above deck and 0.060 x 4.150" head gasket

Cubic
Inch
Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

Ring Set (S42170) Included
7cc
Meas. Min Max

359 4.015 4.724 7.559 2.817 1.575 -54.8cc 1099 14.8 M124 0.500 0.0055 0.0063 930036415 $965.23

362 4.035 " " " " "
1118
14.9 " " " " 930036435 $965.23

366 4.055 " " " " "
1137
15.1 " " " " 930036455 $965.23

359 4.015 4.724 7.559 2.817 1.575 -59.9cc 1085 13.9 M124 0.500 0.0055 0.0063 930036615 $965.23

362 4.035 " " " " "
1104
14.0 " " " " 930036635 $965.23

366 4.055 " " " " "
1124
14.1 " " " " 930036655 $965.23

CUMMINS 5.9L B-Series Forged Aluminum Race Pistons - 12V w/ 0.150" deep valve pockets
CH reduced 0.010", Early 12V and marine-style bowl, Coated skirt and Hard Anodized top ring groove - CR calculated with 0.019" piston protrusion above deck and 0.060 x 4.150" head gasket

Cubic
Inch
Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

Ring Set (9300440xx-6) Included
7cc
Meas. Min Max

359 4.015 4.724 7.559 2.805 1.575 -53.5cc 1191 15.0 M142P 0.500 0.0076 0.0084 197808815 $1,643.18

362 4.035 " " " " "
1210
15.2 " " " " 197808835 $1,643.18

366 4.055 " " " " "
1229
15.3 " " " " 197808855 $1,643.18

359 4.015 4.724 7.559 2.805 1.575 -59.0cc 1183 14.0 M142P 0.500 0.0076 0.0084 197808715 $1,643.18

362 4.035 " " " " "
1202
14.2 " " " " 197808735 $1,643.18

366 4.055 " " " " " 1222 14.3 " " " " 197808755 $1,643.18

CUMMINS 5.9L B-Series Forged Aluminum Race Pistons - 24V w/ 0.100" deep valve pockets
CH reduced 0.010", Modified version of the 04.5-07 bowl, Coated skirt and Hard Anodized top ring groove - CR calculated with 0.010" piston protrusion above deck and 0.060 x 4.150" head gasket

Cubic
Inch
Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

Ring Set (9300440xx-6) Included
6cc
Meas. Min Max

359 4.015 4.724 7.559 2.805 1.575 -46.7cc 1204 16.3 M142P 0.500 0.0076 0.0084 197809915 $1,643.18

362 4.035 " " " " "
1222
16.5 " " " " 197809935 $1,643.18

366 4.055 " " " " "
1242
16.7 " " " " 197809955 $1,643.18

359 4.015 4.724 7.559 2.805 1.575 -51.0cc 1196 15.4 M142P 0.500 0.0076 0.0084 197809815 $1,643.18

362 4.035 " " " " "
1215
15.5 " " " " 197809835 $1,643.18

366 4.055 " " " " "
1234
15.7 " " " " 197809855 $1,643.18

CUMMINS 5.9L B-Series Forged Aluminum Race Pistons - 12V or 24V (Custom Order)
Call for details. Coated skirt and Hard Anodized top ring groove -

Cubic
Inch
Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

Ring Set (9300440xx) Included
Made to order Meas. Min Max

359 4.015 made to order made to order M142P 0.500 0.0076 0.0084 929943015 $2,511.77

362 4.035 " " " " " " " " " " " 929943035 $2,511.77

366 4.055 " " " " " " " " " " " 929943055 $2,511.77

Page 27

CUMMINS 6.7L B-Series Forged Aluminum Race Pistons - 24V w/ 0.200" deep valve pockets
CH reduced 0.010", Modified Industrial bowl, Coated skirt and Hard Anodized top ring groove - CR calculated with 0.006" piston protrusion above deck and 0.062 x 4.312" head gasket

Cubic
Inch
Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

Ring Set (1978502xx-6) Included
6cc
Meas. Min Max

408 4.213 4.882 7.559 2.722 1.575 -55.6cc 1318 15.9 M142P 0.500 0.0076 0.0084 197850313 $0.00

412 4.233 " " " " " 1338 16.0 " " " " 197850333 $0.00

416 4.253 " " " " " 1357 16.1 " " " " 197850353 $0.00

FORD 6.0L Powerstroke Forged Aluminum Race Pistons (Custom Order)
Coated skirt and Hard Anodized top ring groove -

Cubic
Inch
Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

Ring Set (S41940) Included
Made to order Meas. Min Max

363 3.740 made to order made to order M142P 0.500 0.0046 0.0054 929901340 $3,623.54

367 3.760 " " " " " " " " " " " 929901360 $3,623.54

371 3.780 " " " " " " " " " " " 929901380 $3,623.54

FORD 6.4L Powerstroke Forged Aluminum Race Pistons (Custom Order)
Call for details. Coated skirt and Hard Anodized top ring groove -

Cubic
Inch
Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

Ring Set (S42097) Included
Made to order Meas. Min Max

388 3.866 made to order made to order M142P 0.500 0.0046 0.0054 930060266 $3,623.54

392 3.886 " " " " " " " " " " " 930060286 $3,623.54

396 3.906 " " " " " " " " " " " 930060206 $3,623.54

FORD 6.7L Powerstroke Forged Aluminum Race Pistons (Custom Order)
Call for details. Coated skirt and Hard Anodized top ring groove -

Cubic
Inch
Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

Ring Set (S42168) Included
Made to order Meas. Min Max

406 3.898 made to order made to order M142P 0.500 0.0046 0.0054 197835398 $3,442.36

410 3.918 " " " " " " " " " " " 197835318 $3,442.36

414 3.938 " " " " " " " " " " " 197835338 $3,442.36

FORD 7.3L Powerstroke Forged Aluminum Race Pistons (Custom Order)
Call for details. Coated skirt and Hard Anodized top ring groove -

Cubic
Inch
Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

Ring Set (S41768) Included
Made to order Meas. Min Max

444 4.110 made to order made to order M142P 0.500 0.0076 0.0084 197763710 $3,129.41

448 4.130 " " " " " " " " " " " 197763730 $3,129.41

452 4.150 " " " " " " " " " " " 197763750 $3,129.41

GM 6.6L Duramax Cast Performance Pistons
Revised casting with improved crown geometry and Performance bowl design, coated skirt - CR calculated with 0.012" piston protrusion above deck and 0.037 x 4.115" head gasket
CH reduced 0.010" - Fits LB7, LLY, LBZ, LMM, LGH, LML

Cubic
Inch
Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

Ring Set (40xxMDK-D) Included
6.5cc
Meas. Min Max

403 4.055 3.898 6.417 1.951 1.358 -40.7cc 864 16.6 M142 0.500 0.0016 0.0023 930036055 $1,767.15

407 4.075 " " " " " 880 16.8 " " " " 930036075 $1,767.15

411 4.095 " " " " " 896 17.0 " " " " 930036095 $1,767.15

GM 6.6L Duramax Cast Performance Pistons - 0.075" Deep Valve Pockets
Revised casting with improved crown geometry and Performance bowl design, coated skirt - CR calculated with 0.012" piston protrusion above deck and 0.037 x 4.115" head gasket
CH reduced 0.010" - Fits LB7, LLY, LBZ, LMM, LGH, LML

Cubic
Inch
Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

Ring Set (40xxMDK-D) Included
6.5cc
Meas. Min Max

403 4.055 3.898 6.417 1.951 1.358 -41.8cc 861 16.3 M142 0.500 0.0016 0.0023 930029855 $2,008.13

407 4.075 " " " " " 877 16.5 " " " " 930029875 $2,008.13

411 4.095 " " " " " 893 16.6 " " " " 930029895 $2,008.13

GM 6.6L Duramax Forged Aluminum Race Pistons - 0.075" Deep Valve Pockets
Shelf stock version of the Custom Race Piston, Coated skirt and Hard Anodized top ring groove - CR calculated with 0.012" piston protrusion above deck and 0.037 x 4.115" head gasket
CH reduced 0.010" - Fits LB7, LLY, LBZ, LMM, LGH, LML - Brodix and Wagler Cyl. Heads

Cubic
Inch
Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

Ring Set (40xxMDR*) Included
6.5cc
Meas. Min Max

403 4.055 3.898 6.417 1.951 1.358 -41.8cc 774 16.3 M142 0.500 0.0055 0.0063 930036255 $2,894.71

407 4.075 " " " " " 785 16.5 " " " " 930036275 $2,894.71

411 4.095 " " " " " 797 16.6 " " " " 930036295 $2,894.71

*Includes CrN PVD Stainless Steel 1/16 Rectangular Top Ring

GM 6.6L Duramax Forged Aluminum Race Pistons (Custom Order)
Call for details. Coated skirt and Hard Anodized top ring groove -

Cubic
Inch
Bore Stroke Rod Comp
Height Pin
Diam. Crown
Vol Wght
Gram
Comp.
Ratio
Alloy
Clearance Guide Part No.

Ring Set (40xxMDR*) Included
Made to order Meas. Min Max

403 4.055 made to order made to order M142P 0.500 0.0055 0.0063 929946655 $3,294.12

407 4.075 " " " " " " " " " " " 929946675 $3,294.12

411 4.095 " " " " " " " " " " " 929946695 $3,294.12

*Includes CrN PVD Stainless Steel 1/16 Rectangular Top Ring

Top of Page

HOME

Engine Rebuild & Assembly	Balancing & Blueprinting	Cylinder Heads
Engine Rebuild Kits	Engine Start-up	Other Related Web Sites Page 1
Crankshafts	Degree Cam	Other Related Web Sites Page 2
Purchase warranty & Return Information	About the owner of RPM	Frequently Asked Questions
MASTER ENGINE REBUILD KITS & PARTS

Cubic Inches	Bore	Stroke	Rod	Comp Height	Pin Diam.	Crown Vol	Wght Gram	Comp. Ratio			Alloy	Clearance Guide			Part No.
1.0, 1.0, 2.0mm File Fit Performance Ring Set included								58cc	64cc	70cc		Meas.	Min	Max
357 4.030		3.500	5.956	1.775	0.912	-6.5cc	489	11.0	10.3	9.6	4032.	0.500	0.0025	0.0033	930244030 $773.35
306	4.030	3.000	5.090	1.600	0.912	-6.5cc	483	9.6	9.0	8.4	2618	0.500	0.0046	0.0054	930245330 $773.35 *
308	4.040	"	"	"	"	"	488	9.6	9.0	8.4	"	"	"	"	930245340 $773.35 *
306	4.030	"	"	"	"	"	469	9.6	9.0	8.4	4032.	0.500	0.0025	0.0033	930244130 $773.35
308	4.040	"	"	"	"	"	474	9.6	9.0	8.4	"	"	"	"	930244140 $773.35
393	4.030	3.850	5.956	1.600	0.912	-6.5cc	483	12.0	11.2	10.5	2618	0.500	0.0046	0.0054	930245330 $773.35 *
395	4.040	"	"	"	"	"	488	12.1	11.2	10.5	"	"	"	"	930245340 $773.35 *
393	4.030	"	"	"	"	"	469	12.0	11.2	10.5	4032.	0.500	0.0025	0.0033	930244130 $773.35
395	4.040	"	"	"	"	"	474	12.1	11.2	10.5	"	"	"	"	930244140 $773.35
393	4.030	3.850	6.200	1.350	0.927	-6.5cc	451	12.0	11.2	10.5	2618	0.500	0.0046	0.0054	930245930 $864.33 *
393	4.030	"	"	"	"	"	438	12.0	11.2	10.5	4032.	0.500	0.0025	0.0033	930244230 $773.35
408	4.030	4.000	6.250	1.245	0.927	-6.5cc	437	12.5	11.6	10.9	2618	0.500	0.0046	0.0054	930245130 $773.35 *
410	4.040	"	"	"	"	"	440	12.5	11.6	10.9	"	"	"	"	930245140 $773.35 *
414	4.060	"	"	"	"	"	448	12.6	11.7	11.0	"	"	"	"	930245160 $773.35 *
408	4.030	"	"	"	"	"	424	12.5	11.6	10.9	4032.	0.500	0.0025	0.0033	930244330 $773.35
410	4.040	"	"	"	"	"	428.	12.5	11.6	10.9	"	"	"	"	930244340 $773.35
414	4.060	"	"	"	"	"	436	12.6	11.7	11.0	"	"	"	"	930244360 $773.35
428.	4.125	"	"	"	"	"	448	13.0	12.1	11.3	2618	0.500	0.0046	0.0054	930245225 $773.35 *
429	4.130	"	"	"	"	"	450	13.0	12.1	11.3	"	"	"	"	930245230 $773.35 *
434	4.155	"	"	"	"	"	460	13.1	12.2	11.4	"	"	"	"	930245255 $773.35 *
428.	4.125	"	"	"	"	"	435	13.0	12.1	11.3	4032.	0.500	0.0025	0.0033	930244425 $773.33
429	4.130	"	"	"	"	"	437	13.0	12.1	11.3	"	"	"	"	930244430 $773.33
434	4.155	"	"	"	"	"	447	13.1	12.2	11.4	"	"	"	"	930244455 $773.35
418	4.030	4.100	6.200	1.245	0.927	-6.5cc	437	12.8	11.9	11.1	2618	0.500	0.0046	0.0054	930245130 $773.35 *
420	4.040	"	"	"	"	"	441	12.8	11.9	11.1	"	"	"	"	930245140 $773.35 *
425	4.060	"	"	"	"	"	448	12.9	12.0	11.2	"	"	"	"	930245160 $773.35 *
418	4.030	"	"	"	"	"	424	12.8	11.9	11.1	4032.	0.500	0.0025	0.0033	930244330 $773.35
420	4.040	"	"	"	"	"	428.	12.8	11.9	11.1	"	"	"	"	930244340 $773.35
425	4.060	"	"	"	"	"	436	12.9	12.0	11.2	"	"	"	"	930244360 $773.35
438	4.125	"	"	"	"	"	448	13.3	12.3	11.5	2618	0.500	0.0046	0.0054	930245225 $773.35 *
439 $87.98	4.130	"	"	"	"	"	450	13.3	12.4	11.6	"	"	"	"	930245230 $773.35 *
445	4.155	"	"	"	"	"	460	13.4	12.5	11.7	"	"	"	"	930245255 $773.35 *
438	4.125	"	"	"	"	"	435	13.3	12.3	11.5	4032.	0.500	0.0025	0.0033	930244425 $773.33
439 $87.98	4.130	"	"	"	"	"	437	13.3	12.4	11.6	"	"	"	"	930244430 $773.33
445	4.155	"	"	"	"	"	447	13.4	12.5	11.7	"	"	"	"	930244455 $773.35
332	4.030	3.250	5.400	1.165	0.927	-6.5cc	425	10.3	9.6	9.0	2618	0.500	0.0046	0.0054	930245430 $773.35 *
333	4.040	"	"	"	"	"	429	10.4	9.7	9.0	"	"	"	"	930245440 $773.35 *
332	4.030	"	"	"	"	"	413	10.3	9.6	9.0	4032.	0.500	0.0025	0.0033	930244530 $773.35
333	4.040	"	"	"	"	"	417	10.4	9.7	9.0	"	"	"	"	930244540 $773.35
347	4.125	"	"	"	"	"	437	10.7	10.0	9.3	2618	0.500	0.0046	0.0054	930245525 $773.35 *
353	4.155	"	"	"	"	"	448	10.8	10.1	9.5	"	"	"	"	930245555 $773.35 *
347	4.125	"	"	"	"	"	415	10.7	10.0	9.3	4032.	0.500	0.0025	0.0033	930244625 $773.35
353	4.155	"	"	"	"	"	426	10.8	10.1	9.5	"	"	"	"	930244655 $773.35
426	4.030	4.170	6.250	1.165	0.927	-6.5cc	425	13.0	12.1	11.3	2618	0.500	0.0046	0.0054	930245430 $773.35 *
428.	4.040	"	"	"	"	"	429	13.0	12.1	11.3	"	"	"	"	930245440 $773.35 *
426	4.030	"	"	"	"	"	413	13.0	12.1	11.3	4032.	0.500	0.0025	0.0033	930244530 $773.35
428.	4.040	"	"	"	"	"	417	13.0	12.1	11.3	"	"	"	"	930244540 $773.35
446	4.125	"	"	"	"	"	437	13.5	12.5	11.7	2618	0.500	0.0046	0.0054	930245525 $773.35 *
452	4.155	"	"	"	"	"	448	13.6	12.7	11.9	"	"	"	"	930245555 $773.35 *
446	4.125	"	"	"	"	"	415	13.5	12.5	11.7	4032.	0.500	0.0025	0.0033	930244625 $773.35
452	4.155	"	"	"	"	"	426	13.6	12.7	11.9	"	"	"	"	930244655 $773.35
383	4.030	3.750	6.200	1.125	0.927	-6.5cc	407	11.8	10.9	10.2	4032.	0.500	0.0025	0.0033	930173130 $773.35
385	4.040	"	"	"	"	"	411	11.8	11.0	10.3	"	"	"	"	930173140 $773.35
342	4.000	3.400	5.400	1.090R	0.927	-6.5cc	401	10.6	9.9	9.3	2618	0.500	0.0046	0.0054	930245700 $864.32 *
347	4.030	"	"	"	"	"	412	10.8	10.0	9.4	"	"	"	"	930245730 $864.32 *
348	4.035	"	"	"	"	"	414	10.8	10.0	9.4	"	"	"	"	930245735 $864.32 *
349	4.040	"	"	"	"	"	415	10.8	10.1	9.4	"	"	"	"	930245740 $864.32 *
352	4.060	"	"	"	"	"	423	10.9	10.1	9.5	"	"	"	"	930245760 $864.32 *
342	4.000	3.400	5.400	1.090	0.927	-6.5cc	392	10.6	9.9	9.3	4032.	0.500	0.0025	0.0033	930244700 $773.35
347	4.030	"	"	"	"	"	402	10.8	10.0	9.4	"	"	"	"	930244730 $773.33
348	4.035	"	"	"	"	"	404	10.8	10.0	9.4	"	"	"	"	930244735 $773.33
349	4.040	"	"	"	"	"	405	10.8	10.1	9.4	"	"	"	"	930244740 $773.33
352	4.060	"	"	"	"	"	412	10.9	10.1	9.5	"	"	"	"	930244760 $773.35
364	4.125	3.400	5.400	1.090R	0.927	-6.5cc	423	11.2	10.4	9.7	"	"	"	"	930245825 $864.32 *
369	4.155	"	"	"	"	"	435	11.3	10.5	9.8	"	"	"	"	930245855 $864.32 *
364	4.125	3.400	5.400	1.090	0.927	-6.5cc	413	11.2	10.4	9.7	4032.	0.500	0.0025	0.0033	930244825 $773.35
369 4.155		"	"	"	"	"	424	11.3	10.5	9.8	"	"	"	"	930244855 $773.35

Part # Your Cost	BORE	Stroke	ROD Length	PIN Dia.	COMP Height	DOME Vol.	Weight Grams	C/R
930252430 $855.22	4.030	4.000	6.000	.927	1.200R	-20cc	435	10

Cubic Inch	Bore	Stroke	Rod	Comp Height	Pin Diam.	Crown Vol	Wght Gram	Comp. Ratio	Alloy	Clearance Guide			Part No.
Ring Set (S42170) Included								7cc		Meas.	Min	Max
359	4.015	4.724	7.559	2.817	1.575	-47.1cc	1119 $22.96	16.5	M124	0.500	0.0055	0.0063	930036315 $811.13
362	4.035	"	"	"	"	"	1138	16.6	"	"	"	"	930036335 $859.60
366	4.055	"	"	"	"	"	1158	16.8	"	"	"	"	930036355 $811.13
359	4.015	4.724	7.559	2.817	1.575	-52.4cc	1105	15.3	M124	0.500	0.0055	0.0063	930036515 $811.13
362	4.035	"	"	"	"	"	1124	15.4	"	"	"	"	930036535 $811.13
366	4.055	"	"	"	"	"	1144	15.6	"	"	"	"	930036555 $811.13